linux-toradex.git/net/ipv6/ip6_tunnel.c, branch v4.4.103

ipv6: check skb->protocol before lookup for nexthop

2017-05-03T04:19:54+00:00

[ Upstream commit 199ab00f3cdb6f154ea93fa76fd80192861a821d ]

Andrey reported a out-of-bound access in ip6_tnl_xmit(), this
is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4
neigh key as an IPv6 address:

        neigh = dst_neigh_lookup(skb_dst(skb),
                                 &ipv6_hdr(skb)->daddr);
        if (!neigh)
                goto tx_err_link_failure;

        addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE
        addr_type = ipv6_addr_type(addr6);

        if (addr_type == IPV6_ADDR_ANY)
                addr6 = &ipv6_hdr(skb)->daddr;

        memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));

Also the network header of the skb at this point should be still IPv4
for 4in6 tunnels, we shold not just use it as IPv6 header.

This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it
is, we are safe to do the nexthop lookup using skb_dst() and
ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which
dest address we can pick here, we have to rely on callers to fill it
from tunnel config, so just fall to ip6_route_output() to make the
decision.

Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Cc: Steffen Klassert 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()

2017-02-18T15:39:26+00:00

[ Upstream commit 63117f09c768be05a0bf465911297dc76394f686 ]

Casting is a high precedence operation but "off" and "i" are in terms of
bytes so we need to have some parenthesis here.

Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Signed-off-by: Dan Carpenter 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix ip6_tnl_parse_tlv_enc_lim()

2017-02-18T15:39:26+00:00

[ Upstream commit fbfa743a9d2a0ffa24251764f10afc13eb21e739 ]

This function suffers from multiple issues.

First one is that pskb_may_pull() may reallocate skb->head,
so the 'raw' pointer needs either to be reloaded or not used at all.

Second issue is that NEXTHDR_DEST handling does not validate
that the options are present in skb->data, so we might read
garbage or access non existent memory.

With help from Willem de Bruijn.

Signed-off-by: Eric Dumazet 
Reported-by: Dmitry Vyukov  
Cc: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip6_tunnel: disable caching when the traffic class is inherited

2016-12-10T18:07:22+00:00

[ Upstream commit b5c2d49544e5930c96e2632a7eece3f4325a1888 ]

If an ip6 tunnel is configured to inherit the traffic class from
the inner header, the dst_cache must be disabled or it will foul
the policy routing.

The issue is apprently there since at leat Linux-2.6.12-rc2.

Reported-by: Liam McBirnie 
Cc: Liam McBirnie 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip6_tunnel: fix ip6_tnl_lookup

2016-11-15T06:46:38+00:00

[ Upstream commit 68d00f332e0ba7f60f212be74ede290c9f873bc5 ]

The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel
endpoints.") introduces support for wildcards in tunnels endpoints,
but in some rare circumstances ip6_tnl_lookup selects wrong tunnel
interface relying only on source or destination address of the packet
and not checking presence of wildcard in tunnels endpoints. Later in
ip6_tnl_rcv this packets can be dicarded because of difference in
ipproto even if fallback device have proper ipproto configuration.

This patch adds checks of wildcard endpoint in tunnel avoiding such
behavior

Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Signed-off-by: Vadim Fedorenko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip6_tunnel: set rtnl_link_ops before calling register_netdevice

2016-04-20T06:42:06+00:00

[ Upstream commit b6ee376cb0b7fb4e7e07d6cd248bd40436fb9ba6 ]

When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set
before ip6_tnl_create2 is called. When register_netdevice is called, there
is no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl")
Signed-off-by: Thadeu Lima de Souza Cascardo 
Acked-by: Nicolas Dichtel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tunnel: Clear IPCB(skb)->opt before dst_link_failure called

2016-04-20T06:41:56+00:00

[ Upstream commit 5146d1f151122e868e594c7b45115d64825aee5f ]

IPCB may contain data from previous layers (in the observed case the
qdisc layer). In the observed scenario, the data was misinterpreted as
ip header options, which later caused the ihl to be set to an invalid
value (<5). This resulted in an infinite loop in the mips implementation
of ip_fast_csum.

This patch clears IPCB(skb)->opt before dst_link_failure can be called for
various types of tunnels. This change only applies to encapsulated ipv4
packets.

The code introduced in 11c21a30 which clears all of IPCB has been removed
to be consistent with these changes, and instead the opt field is cleared
unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to
SIT, GRE, and IPIP tunnels.

The relevant vti, l2tp, and pptp functions already contain similar code for
clearing the IPCB.

Signed-off-by: Bernie Harris 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/ip6_tunnel: fix dst leak

2015-11-18T21:25:01+00:00

the commit cdf3464e6c6b ("ipv6: Fix dst_entry refcnt bugs in ip6_tunnel")
introduced percpu storage for ip6_tunnel dst cache, but while clearing
such cache it used raw_cpu_ptr to walk the per cpu entries, so cached
dst on non current cpu are not actually reset.

This patch replaces raw_cpu_ptr with per_cpu_ptr, properly cleaning
such storage.

Fixes: cdf3464e6c6b ("ipv6: Fix dst_entry refcnt bugs in ip6_tunnel")
Signed-off-by: Paolo Abeni 
Acked-by: Martin KaFai Lau 
Signed-off-by: David S. Miller

ip6_tunnel: Reduce log level in ip6_tnl_err() to debug

2015-09-24T23:08:37+00:00

Currently error log messages in ip6_tnl_err are printed at 'warn'
level. This is different to other tunnel types which don't print
any messages. These log messages don't provide any information that
couldn't be deduced with networking tools. Also it can be annoying
to have one end of the tunnel go down and have the logs fill with
pointless messages such as "Path to destination invalid or inactive!".

This patch reduces the log level of these messages to 'dbg' level to
bring the visible behaviour into line with other tunnel types.

Signed-off-by: Matt Bennett 
Signed-off-by: David S. Miller

ipv6: Replace spinlock with seqlock and rcu in ip6_tunnel

2015-09-15T21:53:05+00:00

This patch uses a seqlock to ensure consistency between idst->dst and
idst->cookie.  It also makes dst freeing from fib tree to undergo a
rcu grace period.

Signed-off-by: Martin KaFai Lau 
Signed-off-by: David S. Miller