linux-toradex.git/net/ipv6/route.c, branch v3.0.95

net: ipv6: Don't purge default router if accept_ra=2

2013-03-20T19:58:53+00:00

[ Upstream commit 3e8b0ac3e41e3c882222a5522d5df7212438ab51 ]

Setting net.ipv6.conf..accept_ra=2 causes the kernel
to accept RAs even when forwarding is enabled. However, enabling
forwarding purges all default routes on the system, breaking
connectivity until the next RA is received. Fix this by not
purging default routes on interfaces that have accept_ra=2.

Signed-off-by: Lorenzo Colitti 
Acked-by: YOSHIFUJI Hideaki 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: do not create neighbor entries for local delivery

2013-02-14T18:47:34+00:00

[ Upstream commit bd30e947207e2ea0ff2c08f5b4a03025ddce48d3 ]

They will be created at output, if ever needed. This avoids creating
empty neighbor entries when TPROXYing/Forwarding packets for addresses
that are not even directly reachable.

Note that IPv4 already handles it this way. No neighbor entries are
created for local input.

Tested by myself and customer.

Signed-off-by: Jiri Pirko 
Signed-off-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rtnetlink: Compute and store minimum ifinfo dump size

2013-01-17T16:43:58+00:00

commit c7ac8679bec9397afe8918f788cbcef88c38da54 upstream.

The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.

Signed-off-by: Greg Rose 
Signed-off-by: Jeff Kirsher 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

ipv6: Set default hoplimit as zero.

2012-11-17T21:14:24+00:00

[ Upstream commit 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 ]

Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the
hoplimit checking condition and default value in ip6_dst_hoplimit, not
zeros all hoplimit default value.

Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as
const, cause as a37e6e344910(net: force dst_default_metrics to const
section)

Signed-off-by: Li RongQing 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt

2012-10-12T20:28:06+00:00

[ Upstream commit 6825a26c2dc21eb4f8df9c06d3786ddec97cf53b ]

as we hold dst_entry before we call __ip6_del_rt,
so we should alse call dst_release not only return
-ENOENT when the rt6_info is ip6_null_entry.

and we already hold the dst entry, so I think it's
safe to call dst_release out of the write-read lock.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Move ipv6 proc file registration to end of init order

2012-07-16T15:47:37+00:00

[ Upstream commit d189634ecab947c10f6f832258b103d0bbfe73cc ]

/proc/net/ipv6_route reflects the contents of fib_table_hash. The proc
handler is installed in ip6_route_net_init() whereas fib_table_hash is
allocated in fib6_net_init() _after_ the proc handler has been installed.

This opens up a short time frame to access fib_table_hash with its pants
down.

Move the registration of the proc files to a later point in the init
order to avoid the race.

Tested :-)

Signed-off-by: Thomas Graf 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix a potential rcu_read_lock() imbalance in rt6_fill_node()

2012-04-02T16:27:20+00:00

[ Upstream commit 94f826b8076e2cb92242061e92f21b5baa3eccc2 ]

Commit f2c31e32b378 (net: fix NULL dereferences in check_peer_redir() )
added a regression in rt6_fill_node(), leading to rcu_read_lock()
imbalance.

Thats because NLA_PUT() can make a jump to nla_put_failure label.

Fix this by using nla_put()

Many thanks to Ben Greear for his help

Reported-by: Ben Greear 
Reported-by: Dave Jones 
Signed-off-by: Eric Dumazet 
Tested-by: Ben Greear 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: fix NULL dereferences in check_peer_redir()

2012-02-13T19:06:13+00:00

[ Upstream commit d3aaeb38c40e5a6c08dd31a1b64da65c4352be36, along
  with dependent backports of commits:
     69cce1d1404968f78b177a0314f5822d5afdbbfb
     9de79c127cccecb11ae6a21ab1499e87aa222880
     218fa90f072e4aeff9003d57e390857f4f35513e
     580da35a31f91a594f3090b7a2c39b85cb051a12
     f7e57044eeb1841847c24aa06766c8290c202583
     e049f28883126c689cf95859480d9ee4ab23b7fa ]

Gergely Kalman reported crashes in check_peer_redir().

It appears commit f39925dbde778 (ipv4: Cache learned redirect
information in inetpeer.) added a race, leading to possible NULL ptr
dereference.

Since we can now change dst neighbour, we should make sure a reader can
safely use a neighbour.

Add RCU protection to dst neighbour, and make sure check_peer_redir()
can be called safely by different cpus in parallel.

As neighbours are already freed after one RCU grace period, this patch
should not add typical RCU penalty (cache cold effects)

Many thanks to Gergely for providing a pretty report pointing to the
bug.

Reported-by: Gergely Kalman 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Don't put artificial limit on routing table size.

2011-07-02T00:30:43+00:00

IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.

Signed-off-by: David S. Miller

ipv6: Don't change dst->flags using assignments.

2011-07-02T00:30:43+00:00

This blows away any flags already set in the entry.

Signed-off-by: David S. Miller