<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/net/ipv6, branch v3.12.43</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>ipv6: Don't reduce hop limit for an interface</title>
<updated>2015-04-27T08:53:38+00:00</updated>
<author>
<name>D.S. Ljungmark</name>
<email>ljungmark@modio.se</email>
</author>
<published>2015-03-25T08:28:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=ac12ff18b11259e10c2d543aa58c73ff88a68e77'/>
<id>ac12ff18b11259e10c2d543aa58c73ff88a68e77</id>
<content type='text'>
[ Upstream commit 6fd99094de2b83d1d4c8457f2c83483b2828e75a ]

A local route may have a lower hop_limit set than global routes do.

RFC 3756, Section 4.2.7, "Parameter Spoofing"

&gt;   1.  The attacker includes a Current Hop Limit of one or another small
&gt;       number which the attacker knows will cause legitimate packets to
&gt;       be dropped before they reach their destination.

&gt;   As an example, one possible approach to mitigate this threat is to
&gt;   ignore very small hop limits.  The nodes could implement a
&gt;   configurable minimum hop limit, and ignore attempts to set it below
&gt;   said limit.

Signed-off-by: D.S. Ljungmark &lt;ljungmark@modio.se&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 6fd99094de2b83d1d4c8457f2c83483b2828e75a ]

A local route may have a lower hop_limit set than global routes do.

RFC 3756, Section 4.2.7, "Parameter Spoofing"

&gt;   1.  The attacker includes a Current Hop Limit of one or another small
&gt;       number which the attacker knows will cause legitimate packets to
&gt;       be dropped before they reach their destination.

&gt;   As an example, one possible approach to mitigate this threat is to
&gt;   ignore very small hop limits.  The nodes could implement a
&gt;   configurable minimum hop limit, and ignore attempts to set it below
&gt;   said limit.

Signed-off-by: D.S. Ljungmark &lt;ljungmark@modio.se&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: prevent fetching dst twice in early demux code</title>
<updated>2015-04-27T08:53:30+00:00</updated>
<author>
<name>Michal Kubeček</name>
<email>mkubecek@suse.cz</email>
</author>
<published>2015-03-23T14:14:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=83df7c74b178e4835d0541745fd251fef4670aec'/>
<id>83df7c74b178e4835d0541745fd251fef4670aec</id>
<content type='text'>
[ Upstream commit d0c294c53a771ae7e84506dfbd8c18c30f078735 ]

On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux()

        struct dst_entry *dst = sk-&gt;sk_rx_dst;

        if (dst)
                dst = dst_check(dst, inet6_sk(sk)-&gt;rx_dst_cookie);

to code reading sk-&gt;sk_rx_dst twice, once for the test and once for
the argument of ip6_dst_check() (dst_check() is inline). This allows
ip6_dst_check() to be called with null first argument, causing a crash.

Protect sk-&gt;sk_rx_dst access by ACCESS_ONCE() both in IPv4 and IPv6
TCP early demux code.

Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.")
Fixes: c7109986db3c ("ipv6: Early TCP socket demux")
Signed-off-by: Michal Kubecek &lt;mkubecek@suse.cz&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d0c294c53a771ae7e84506dfbd8c18c30f078735 ]

On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux()

        struct dst_entry *dst = sk-&gt;sk_rx_dst;

        if (dst)
                dst = dst_check(dst, inet6_sk(sk)-&gt;rx_dst_cookie);

to code reading sk-&gt;sk_rx_dst twice, once for the test and once for
the argument of ip6_dst_check() (dst_check() is inline). This allows
ip6_dst_check() to be called with null first argument, causing a crash.

Protect sk-&gt;sk_rx_dst access by ACCESS_ONCE() both in IPv4 and IPv6
TCP early demux code.

Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.")
Fixes: c7109986db3c ("ipv6: Early TCP socket demux")
Signed-off-by: Michal Kubecek &lt;mkubecek@suse.cz&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: reallocate addrconf router for ipv6 address when lo device up</title>
<updated>2015-04-09T12:13:49+00:00</updated>
<author>
<name>Gao feng</name>
<email>gaofeng@cn.fujitsu.com</email>
</author>
<published>2014-01-24T08:29:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=67cfe124ce1a22e0b069da5fb1d337bb2b32d978'/>
<id>67cfe124ce1a22e0b069da5fb1d337bb2b32d978</id>
<content type='text'>
commit 33d99113b1102c2d2f8603b9ba72d89d915c13f5 upstream.

commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
allocates addrconf router for ipv6 address when lo device up.
but commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad
"ipv6:don't call addrconf_dst_alloc again when enable lo" breaks
this behavior.

Since the addrconf router is moved to the garbage list when
lo device down, we should release this router and rellocate
a new one for ipv6 address when lo device up.

This patch solves bug 67951 on bugzilla
https://bugzilla.kernel.org/show_bug.cgi?id=67951

change from v1:
use ip6_rt_put to repleace ip6_del_rt, thanks Hannes!
change code style, suggested by Sergei.

CC: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
CC: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Reported-by: Weilong Chen &lt;chenweilong@huawei.com&gt;
Signed-off-by: Weilong Chen &lt;chenweilong@huawei.com&gt;
Signed-off-by: Gao feng &lt;gaofeng@cn.fujitsu.com&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 33d99113b1102c2d2f8603b9ba72d89d915c13f5 upstream.

commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
allocates addrconf router for ipv6 address when lo device up.
but commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad
"ipv6:don't call addrconf_dst_alloc again when enable lo" breaks
this behavior.

Since the addrconf router is moved to the garbage list when
lo device down, we should release this router and rellocate
a new one for ipv6 address when lo device up.

This patch solves bug 67951 on bugzilla
https://bugzilla.kernel.org/show_bug.cgi?id=67951

change from v1:
use ip6_rt_put to repleace ip6_del_rt, thanks Hannes!
change code style, suggested by Sergei.

CC: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
CC: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Reported-by: Weilong Chen &lt;chenweilong@huawei.com&gt;
Signed-off-by: Weilong Chen &lt;chenweilong@huawei.com&gt;
Signed-off-by: Gao feng &lt;gaofeng@cn.fujitsu.com&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: fix backtracking for throw routes</title>
<updated>2015-04-09T11:13:46+00:00</updated>
<author>
<name>Steven Barth</name>
<email>cyrus@openwrt.org</email>
</author>
<published>2015-03-19T15:16:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7d5a6af313ac6c7a61657261f27bd72f547af306'/>
<id>7d5a6af313ac6c7a61657261f27bd72f547af306</id>
<content type='text'>
[ Upstream commit 73ba57bfae4a1914f6a6dac71e3168dd900e00af ]

for throw routes to trigger evaluation of other policy rules
EAGAIN needs to be propagated up to fib_rules_lookup
similar to how its done for IPv4

A simple testcase for verification is:

ip -6 rule add lookup 33333 priority 33333
ip -6 route add throw 2001:db8::1
ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333
ip route get 2001:db8::1

Signed-off-by: Steven Barth &lt;cyrus@openwrt.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 73ba57bfae4a1914f6a6dac71e3168dd900e00af ]

for throw routes to trigger evaluation of other policy rules
EAGAIN needs to be propagated up to fib_rules_lookup
similar to how its done for IPv4

A simple testcase for verification is:

ip -6 rule add lookup 33333 priority 33333
ip -6 route add throw 2001:db8::1
ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333
ip route get 2001:db8::1

Signed-off-by: Steven Barth &lt;cyrus@openwrt.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: ping: Return EAFNOSUPPORT when appropriate.</title>
<updated>2015-03-12T09:06:29+00:00</updated>
<author>
<name>Lorenzo Colitti</name>
<email>lorenzo@google.com</email>
</author>
<published>2015-03-03T14:16:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7a763ff1bb18190791d0823996ba0a039268d2cf'/>
<id>7a763ff1bb18190791d0823996ba0a039268d2cf</id>
<content type='text'>
[ Upstream commit 9145736d4862145684009d6a72a6e61324a9439e ]

1. For an IPv4 ping socket, ping_check_bind_addr does not check
   the family of the socket address that's passed in. Instead,
   make it behave like inet_bind, which enforces either that the
   address family is AF_INET, or that the family is AF_UNSPEC and
   the address is 0.0.0.0.
2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL
   if the socket family is not AF_INET6. Return EAFNOSUPPORT
   instead, for consistency with inet6_bind.
3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT
   instead of EINVAL if an incorrect socket address structure is
   passed in.
4. Make IPv6 ping sockets be IPv6-only. The code does not support
   IPv4, and it cannot easily be made to support IPv4 because
   the protocol numbers for ICMP and ICMPv6 are different. This
   makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead
   of making the socket unusable.

Among other things, this fixes an oops that can be triggered by:

    int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP);
    struct sockaddr_in6 sin6 = {
        .sin6_family = AF_INET6,
        .sin6_addr = in6addr_any,
    };
    bind(s, (struct sockaddr *) &amp;sin6, sizeof(sin6));

Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241
Signed-off-by: Lorenzo Colitti &lt;lorenzo@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9145736d4862145684009d6a72a6e61324a9439e ]

1. For an IPv4 ping socket, ping_check_bind_addr does not check
   the family of the socket address that's passed in. Instead,
   make it behave like inet_bind, which enforces either that the
   address family is AF_INET, or that the family is AF_UNSPEC and
   the address is 0.0.0.0.
2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL
   if the socket family is not AF_INET6. Return EAFNOSUPPORT
   instead, for consistency with inet6_bind.
3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT
   instead of EINVAL if an incorrect socket address structure is
   passed in.
4. Make IPv6 ping sockets be IPv6-only. The code does not support
   IPv4, and it cannot easily be made to support IPv4 because
   the protocol numbers for ICMP and ICMPv6 are different. This
   makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead
   of making the socket unusable.

Among other things, this fixes an oops that can be triggered by:

    int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP);
    struct sockaddr_in6 sin6 = {
        .sin6_family = AF_INET6,
        .sin6_addr = in6addr_any,
    };
    bind(s, (struct sockaddr *) &amp;sin6, sizeof(sin6));

Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241
Signed-off-by: Lorenzo Colitti &lt;lorenzo@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>udp: only allow UFO for packets from SOCK_DGRAM sockets</title>
<updated>2015-03-12T09:06:28+00:00</updated>
<author>
<name>Michal Kubeček</name>
<email>mkubecek@suse.cz</email>
</author>
<published>2015-03-02T17:27:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4f9586428f533c47478f73cfedbc13f0610b2db9'/>
<id>4f9586428f533c47478f73cfedbc13f0610b2db9</id>
<content type='text'>
[ Upstream commit acf8dd0a9d0b9e4cdb597c2f74802f79c699e802 ]

If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb-&gt;ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb-&gt;csum_start and skb-&gt;csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.

Signed-off-by: Michal Kubecek &lt;mkubecek@suse.cz&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit acf8dd0a9d0b9e4cdb597c2f74802f79c699e802 ]

If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb-&gt;ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb-&gt;csum_start and skb-&gt;csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.

Signed-off-by: Michal Kubecek &lt;mkubecek@suse.cz&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: fix ipv6_cow_metrics for non DST_HOST case</title>
<updated>2015-03-12T09:06:23+00:00</updated>
<author>
<name>Martin KaFai Lau</name>
<email>kafai@fb.com</email>
</author>
<published>2015-02-13T00:14:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=818201d39770dbb7ec90c6f10bcdc3bf889362a5'/>
<id>818201d39770dbb7ec90c6f10bcdc3bf889362a5</id>
<content type='text'>
[ Upstream commit 3b4711757d7903ab6fa88a9e7ab8901b8227da60 ]

ipv6_cow_metrics() currently assumes only DST_HOST routes require
dynamic metrics allocation from inetpeer.  The assumption breaks
when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric.
Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set()
is called after the route is created.

This patch creates the metrics array (by calling dst_cow_metrics_generic) in
ipv6_cow_metrics().

Test:
radvd.conf:
interface qemubr0
{
	AdvLinkMTU 1300;
	AdvCurHopLimit 30;

	prefix fd00:face:face:face::/64
	{
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Before:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec
fe80::/64 dev eth0  proto kernel  metric 256
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec

After:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec mtu 1300
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1300
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec mtu 1300 hoplimit 30

Fixes: 8e2ec639173f325 (ipv6: don't use inetpeer to store metrics for routes.)
Signed-off-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3b4711757d7903ab6fa88a9e7ab8901b8227da60 ]

ipv6_cow_metrics() currently assumes only DST_HOST routes require
dynamic metrics allocation from inetpeer.  The assumption breaks
when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric.
Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set()
is called after the route is created.

This patch creates the metrics array (by calling dst_cow_metrics_generic) in
ipv6_cow_metrics().

Test:
radvd.conf:
interface qemubr0
{
	AdvLinkMTU 1300;
	AdvCurHopLimit 30;

	prefix fd00:face:face:face::/64
	{
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Before:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec
fe80::/64 dev eth0  proto kernel  metric 256
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec

After:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec mtu 1300
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1300
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec mtu 1300 hoplimit 30

Fixes: 8e2ec639173f325 (ipv6: don't use inetpeer to store metrics for routes.)
Signed-off-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too</title>
<updated>2015-02-10T10:16:50+00:00</updated>
<author>
<name>Hannes Frederic Sowa</name>
<email>hannes@stressinduktion.org</email>
</author>
<published>2015-01-26T14:11:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c196ece7d43ba9597ea7fefa8a12c454858e4d6c'/>
<id>c196ece7d43ba9597ea7fefa8a12c454858e4d6c</id>
<content type='text'>
[ Upstream commit 6e9e16e6143b725662e47026a1d0f270721cdd24 ]

Lubomir Rintel reported that during replacing a route the interface
reference counter isn't correctly decremented.

To quote bug &lt;https://bugzilla.kernel.org/show_bug.cgi?id=91941&gt;:
| [root@rhel7-5 lkundrak]# sh -x lal
| + ip link add dev0 type dummy
| + ip link set dev0 up
| + ip link add dev1 type dummy
| + ip link set dev1 up
| + ip addr add 2001:db8:8086::2/64 dev dev0
| + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20
| + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10
| + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20
| + ip link del dev0 type dummy
| Message from syslogd@rhel7-5 at Jan 23 10:54:41 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
|
| Message from syslogd@rhel7-5 at Jan 23 10:54:51 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2

During replacement of a rt6_info we must walk all parent nodes and check
if the to be replaced rt6_info got propagated. If so, replace it with
an alive one.

Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag")
Reported-by: Lubomir Rintel &lt;lkundrak@v3.sk&gt;
Signed-off-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Tested-by: Lubomir Rintel &lt;lkundrak@v3.sk&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 6e9e16e6143b725662e47026a1d0f270721cdd24 ]

Lubomir Rintel reported that during replacing a route the interface
reference counter isn't correctly decremented.

To quote bug &lt;https://bugzilla.kernel.org/show_bug.cgi?id=91941&gt;:
| [root@rhel7-5 lkundrak]# sh -x lal
| + ip link add dev0 type dummy
| + ip link set dev0 up
| + ip link add dev1 type dummy
| + ip link set dev1 up
| + ip addr add 2001:db8:8086::2/64 dev dev0
| + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20
| + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10
| + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20
| + ip link del dev0 type dummy
| Message from syslogd@rhel7-5 at Jan 23 10:54:41 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
|
| Message from syslogd@rhel7-5 at Jan 23 10:54:51 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2

During replacement of a rt6_info we must walk all parent nodes and check
if the to be replaced rt6_info got propagated. If so, replace it with
an alive one.

Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag")
Reported-by: Lubomir Rintel &lt;lkundrak@v3.sk&gt;
Signed-off-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Tested-by: Lubomir Rintel &lt;lkundrak@v3.sk&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: stop sending PTB packets for MTU &lt; 1280</title>
<updated>2015-02-10T10:16:49+00:00</updated>
<author>
<name>Hagen Paul Pfeifer</name>
<email>hagen@jauu.net</email>
</author>
<published>2015-01-15T21:34:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a20ac4fd85a5c37db9603f451abbe7834e5ae6cb'/>
<id>a20ac4fd85a5c37db9603f451abbe7834e5ae6cb</id>
<content type='text'>
[ Upstream commit 9d289715eb5c252ae15bd547cb252ca547a3c4f2 ]

Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.

See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.

[1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00

Signed-off-by: Fernando Gont &lt;fgont@si6networks.com&gt;
Signed-off-by: Hagen Paul Pfeifer &lt;hagen@jauu.net&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9d289715eb5c252ae15bd547cb252ca547a3c4f2 ]

Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.

See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.

[1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00

Signed-off-by: Fernando Gont &lt;fgont@si6networks.com&gt;
Signed-off-by: Hagen Paul Pfeifer &lt;hagen@jauu.net&gt;
Acked-by: Hannes Frederic Sowa &lt;hannes@stressinduktion.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ip: zero sockaddr returned on error queue</title>
<updated>2015-02-10T10:16:48+00:00</updated>
<author>
<name>Willem de Bruijn</name>
<email>willemb@google.com</email>
</author>
<published>2015-01-15T18:18:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7c82148b3715206c5ffea1ffde27e5f44fa30363'/>
<id>7c82148b3715206c5ffea1ffde27e5f44fa30363</id>
<content type='text'>
[ Upstream commit f812116b174e59a350acc8e4856213a166a91222 ]

The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That
structure is defined and allocated on the stack as

    struct {
            struct sock_extended_err ee;
            struct sockaddr_in(6)    offender;
    } errhdr;

The second part is only initialized for certain SO_EE_ORIGIN values.
Always initialize it completely.

An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that
would return uninitialized bytes.

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;

----

Also verified that there is no padding between errhdr.ee and
errhdr.offender that could leak additional kernel data.
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f812116b174e59a350acc8e4856213a166a91222 ]

The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That
structure is defined and allocated on the stack as

    struct {
            struct sock_extended_err ee;
            struct sockaddr_in(6)    offender;
    } errhdr;

The second part is only initialized for certain SO_EE_ORIGIN values.
Always initialize it completely.

An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that
would return uninitialized bytes.

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;

----

Also verified that there is no padding between errhdr.ee and
errhdr.offender that could leak additional kernel data.
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
</feed>
