linux-toradex.git/net/ipv6, branch v4.4.77

ipv6: Do not leak throw route references

2017-07-05T12:37:14+00:00

[ Upstream commit 07f615574f8ac499875b21c1142f26308234a92c ]

While commit 73ba57bfae4a ("ipv6: fix backtracking for throw routes")
does good job on error propagation to the fib_rules_lookup()
in fib rules core framework that also corrects throw routes
handling, it does not solve route reference leakage problem
happened when we return -EAGAIN to the fib_rules_lookup()
and leave routing table entry referenced in arg->result.

If rule with matched throw route isn't last matched in the
list we overwrite arg->result losing reference on throw
route stored previously forever.

We also partially revert commit ab997ad40839 ("ipv6: fix the
incorrect return value of throw route") since we never return
routing table entry with dst.error == -EAGAIN when
CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point
to check for RTF_REJECT flag since it is always set throw
route.

Fixes: 73ba57bfae4a ("ipv6: fix backtracking for throw routes")
Signed-off-by: Serhey Popovych 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix calling in6_ifa_hold incorrectly for dad work

2017-07-05T12:37:14+00:00

[ Upstream commit f8a894b218138888542a5058d0e902378fd0d4ec ]

Now when starting the dad work in addrconf_mod_dad_work, if the dad work
is idle and queued, it needs to hold ifa.

The problem is there's one gap in [1], during which if the pending dad work
is removed elsewhere. It will miss to hold ifa, but the dad word is still
idea and queue.

        if (!delayed_work_pending(&ifp->dad_work))
                in6_ifa_hold(ifp);
                    <--------------[1]
        mod_delayed_work(addrconf_wq, &ifp->dad_work, delay);

An use-after-free issue can be caused by this.

Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in
net6_ifa_finish_destroy was hit because of it.

As Hannes' suggestion, this patch is to fix it by holding ifa first in
addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if
the dad_work is already in queue.

Note that this patch did not choose to fix it with:

  if (!mod_delayed_work(delay))
          in6_ifa_hold(ifp);

As with it, when delay == 0, dad_work would be scheduled immediately, all
addrconf_mod_dad_work(0) callings had to be moved under ifp->lock.

Reported-by: Wei Chen 
Suggested-by: Hannes Frederic Sowa 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: release dst on error in ip6_dst_lookup_tail

2017-07-05T12:37:13+00:00

commit 00ea1ceebe0d9f2dc1cc2b7bd575a00100c27869 upstream.

If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
check, release the dst before returning an error.

Fixes: ec5e3b0a1d41 ("ipv6: Inhibit IPv4-mapped src address on the wire.")
Signed-off-by: Willem de Bruijn 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches

2017-06-17T04:39:36+00:00

[ Upstream commit a088d1d73a4bcfd7bc482f8d08375b9b665dc3e5 ]

When for instance a mobile Linux device roams from one access point to
another with both APs sharing the same broadcast domain and a
multicast snooping switch in between:

1)    (c) <~~~> (AP1) <--[SSW]--> (AP2)

2)              (AP1) <--[SSW]--> (AP2) <~~~> (c)

Then currently IPv6 multicast packets will get lost for (c) until an
MLD Querier sends its next query message. The packet loss occurs
because upon roaming the Linux host so far stayed silent regarding
MLD and the snooping switch will therefore be unaware of the
multicast topology change for a while.

This patch fixes this by always resending MLD reports when an interface
change happens, for instance from NO-CARRIER to CARRIER state.

Signed-off-by: Linus Lüssing 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ipv6: Inhibit IPv4-mapped src address on the wire.

2017-06-17T04:39:35+00:00

[ Upstream commit ec5e3b0a1d41fbda0cc33a45bc9e54e91d9d12c7 ]

This patch adds a check for the problematic case of an IPv4-mapped IPv6
source address and a destination address that is neither an IPv4-mapped
IPv6 address nor in6addr_any, and returns an appropriate error. The
check in done before returning from looking up the route.

Signed-off-by: Jonathan T. Leighton 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ipv6: Handle IPv4-mapped src to in6addr_any dst.

2017-06-17T04:39:35+00:00

[ Upstream commit 052d2369d1b479cdbbe020fdd6d057d3c342db74 ]

This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.

Signed-off-by: Jonathan T. Leighton 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: ping: do not abuse udp_poll()

2017-06-14T11:16:19+00:00

[ Upstream commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 ]

Alexander reported various KASAN messages triggered in recent kernels

The problem is that ping sockets should not use udp_poll() in the first
place, and recent changes in UDP stack finally exposed this old bug.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Cc: Solar Designer 
Cc: Vasiliy Kulikov 
Cc: Lorenzo Colitti 
Acked-By: Lorenzo Colitti 
Tested-By: Lorenzo Colitti 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix leak in ipv6_gso_segment().

2017-06-14T11:16:19+00:00

[ Upstream commit e3e86b5119f81e5e2499bea7ea1ebe8ac6aab789 ]

If ip6_find_1stfragopt() fails and we return an error we have to free
up 'segs' because nobody else is going to.

Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()

2017-06-14T11:16:19+00:00

[ Upstream commit 6e80ac5cc992ab6256c3dae87f7e57db15e1a58c ]

xfrm6_find_1stfragopt() may now return an error code and we must
not treat it as a length.

Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Signed-off-by: Ben Hutchings 
Acked-by: Craig Gallek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix out of bound writes in __ip6_append_data()

2017-06-07T10:05:58+00:00

[ Upstream commit 232cd35d0804cc241eb887bb8d4d9b3b9881c64a ]

Andrey Konovalov and idaifish@gmail.com reported crashes caused by
one skb shared_info being overwritten from __ip6_append_data()

Andrey program lead to following state :

copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200

The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
fraggap, 0); is overwriting skb->head and skb_shared_info

Since we apparently detect this rare condition too late, move the
code earlier to even avoid allocating skb and risking crashes.

Once again, many thanks to Andrey and syzkaller team.

Signed-off-by: Eric Dumazet 
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Reported-by: 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman