<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/net/ipv6, branch v4.9.119</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>multicast: do not restore deleted record source filter mode to new one</title>
<updated>2018-07-28T05:49:11+00:00</updated>
<author>
<name>Hangbin Liu</name>
<email>liuhangbin@gmail.com</email>
</author>
<published>2018-07-20T06:04:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=cc403d5dc140ba74400335b84b91f97d07dbd569'/>
<id>cc403d5dc140ba74400335b84b91f97d07dbd569</id>
<content type='text'>
There are two scenarios that we will restore deleted records. The first is
when device down and up(or unmap/remap). In this scenario the new filter
mode is same with previous one. Because we get it from in_dev-&gt;mc_list and
we do not touch it during device down and up.

The other scenario is when a new socket join a group which was just delete
and not finish sending status reports. In this scenario, we should use the
current filter mode instead of restore old one. Here are 4 cases in total.

old_socket        new_socket       before_fix       after_fix
  IN(A)             IN(A)           ALLOW(A)         ALLOW(A)
  IN(A)             EX( )           TO_IN( )         TO_EX( )
  EX( )             IN(A)           TO_EX( )         ALLOW(A)
  EX( )             EX( )           TO_EX( )         TO_EX( )

Fixes: 24803f38a5c0b (igmp: do not remove igmp souce list info when set link down)
Fixes: 1666d49e1d416 (mld: do not remove mld souce list info when set link down)
Signed-off-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There are two scenarios that we will restore deleted records. The first is
when device down and up(or unmap/remap). In this scenario the new filter
mode is same with previous one. Because we get it from in_dev-&gt;mc_list and
we do not touch it during device down and up.

The other scenario is when a new socket join a group which was just delete
and not finish sending status reports. In this scenario, we should use the
current filter mode instead of restore old one. Here are 4 cases in total.

old_socket        new_socket       before_fix       after_fix
  IN(A)             IN(A)           ALLOW(A)         ALLOW(A)
  IN(A)             EX( )           TO_IN( )         TO_EX( )
  EX( )             IN(A)           TO_EX( )         ALLOW(A)
  EX( )             EX( )           TO_EX( )         TO_EX( )

Fixes: 24803f38a5c0b (igmp: do not remove igmp souce list info when set link down)
Fixes: 1666d49e1d416 (mld: do not remove mld souce list info when set link down)
Signed-off-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull</title>
<updated>2018-07-28T05:49:11+00:00</updated>
<author>
<name>Willem de Bruijn</name>
<email>willemb@google.com</email>
</author>
<published>2018-07-23T23:36:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=03fbf2b8237a3f1689848cf9f2d9bc7c1869e834'/>
<id>03fbf2b8237a3f1689848cf9f2d9bc7c1869e834</id>
<content type='text'>
[ Upstream commit 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 ]

Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:

  BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
  CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x185/0x1d0 lib/dump_stack.c:113
    kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
    kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
    kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
    copy_to_user include/linux/uaccess.h:184 [inline]
    put_cmsg+0x5ef/0x860 net/core/scm.c:242
    ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
    ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
    rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
    [..]

This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.

With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.

Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.

Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 ]

Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:

  BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
  CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x185/0x1d0 lib/dump_stack.c:113
    kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
    kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
    kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
    copy_to_user include/linux/uaccess.h:184 [inline]
    put_cmsg+0x5ef/0x860 net/core/scm.c:242
    ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
    ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
    rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
    [..]

This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.

With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.

Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.

Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ip: hash fragments consistently</title>
<updated>2018-07-28T05:49:11+00:00</updated>
<author>
<name>Paolo Abeni</name>
<email>pabeni@redhat.com</email>
</author>
<published>2018-07-23T14:50:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=93d94fec94c7df51c7f36f45fdc18994073f47ee'/>
<id>93d94fec94c7df51c7f36f45fdc18994073f47ee</id>
<content type='text'>
[ Upstream commit 3dd1c9a1270736029ffca670e9bd0265f4120600 ]

The skb hash for locally generated ip[v6] fragments belonging
to the same datagram can vary in several circumstances:
* for connected UDP[v6] sockets, the first fragment get its hash
  via set_owner_w()/skb_set_hash_from_sk()
* for unconnected IPv6 UDPv6 sockets, the first fragment can get
  its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if
  auto_flowlabel is enabled

For the following frags the hash is usually computed via
skb_get_hash().
The above can cause OoO for unconnected IPv6 UDPv6 socket: in that
scenario the egress tx queue can be selected on a per packet basis
via the skb hash.
It may also fool flow-oriented schedulers to place fragments belonging
to the same datagram in different flows.

Fix the issue by copying the skb hash from the head frag into
the others at fragmentation time.

Before this commit:
perf probe -a "dev_queue_xmit skb skb-&gt;hash skb-&gt;l4_hash:b1@0/8 skb-&gt;sw_hash:b1@1/8"
netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n &amp;
perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1
perf script
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0

After this commit:
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0

Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb-&gt;hash in ip6_make_flowlabel")
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3dd1c9a1270736029ffca670e9bd0265f4120600 ]

The skb hash for locally generated ip[v6] fragments belonging
to the same datagram can vary in several circumstances:
* for connected UDP[v6] sockets, the first fragment get its hash
  via set_owner_w()/skb_set_hash_from_sk()
* for unconnected IPv6 UDPv6 sockets, the first fragment can get
  its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if
  auto_flowlabel is enabled

For the following frags the hash is usually computed via
skb_get_hash().
The above can cause OoO for unconnected IPv6 UDPv6 socket: in that
scenario the egress tx queue can be selected on a per packet basis
via the skb hash.
It may also fool flow-oriented schedulers to place fragments belonging
to the same datagram in different flows.

Fix the issue by copying the skb hash from the head frag into
the others at fragmentation time.

Before this commit:
perf probe -a "dev_queue_xmit skb skb-&gt;hash skb-&gt;l4_hash:b1@0/8 skb-&gt;sw_hash:b1@1/8"
netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n &amp;
perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1
perf script
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0

After this commit:
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0

Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb-&gt;hash in ip6_make_flowlabel")
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: ipv6: nf_defrag: drop skb dst before queueing</title>
<updated>2018-07-22T12:27:39+00:00</updated>
<author>
<name>Florian Westphal</name>
<email>fw@strlen.de</email>
</author>
<published>2018-07-09T11:43:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=ad8b1ffc3efae2f65080bdb11145c87d299b8f9a'/>
<id>ad8b1ffc3efae2f65080bdb11145c87d299b8f9a</id>
<content type='text'>
commit 84379c9afe011020e797e3f50a662b08a6355dcf upstream.

Eric Dumazet reports:
 Here is a reproducer of an annoying bug detected by syzkaller on our production kernel
 [..]
 ./b78305423 enable_conntrack
 Then :
 sleep 60
 dmesg | tail -10
 [  171.599093] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  181.631024] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  191.687076] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  201.703037] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  211.711072] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  221.959070] unregister_netdevice: waiting for lo to become free. Usage count = 2

Reproducer sends ipv6 fragment that hits nfct defrag via LOCAL_OUT hook.
skb gets queued until frag timer expiry -- 1 minute.

Normally nf_conntrack_reasm gets called during prerouting, so skb has
no dst yet which might explain why this wasn't spotted earlier.

Reported-by: Eric Dumazet &lt;eric.dumazet@gmail.com&gt;
Reported-by: John Sperbeck &lt;jsperbeck@google.com&gt;
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Tested-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 84379c9afe011020e797e3f50a662b08a6355dcf upstream.

Eric Dumazet reports:
 Here is a reproducer of an annoying bug detected by syzkaller on our production kernel
 [..]
 ./b78305423 enable_conntrack
 Then :
 sleep 60
 dmesg | tail -10
 [  171.599093] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  181.631024] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  191.687076] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  201.703037] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  211.711072] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  221.959070] unregister_netdevice: waiting for lo to become free. Usage count = 2

Reproducer sends ipv6 fragment that hits nfct defrag via LOCAL_OUT hook.
skb gets queued until frag timer expiry -- 1 minute.

Normally nf_conntrack_reasm gets called during prerouting, so skb has
no dst yet which might explain why this wasn't spotted earlier.

Reported-by: Eric Dumazet &lt;eric.dumazet@gmail.com&gt;
Reported-by: John Sperbeck &lt;jsperbeck@google.com&gt;
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Tested-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: x_tables: initialise match/target check parameter struct</title>
<updated>2018-07-17T09:37:54+00:00</updated>
<author>
<name>Florian Westphal</name>
<email>fw@strlen.de</email>
</author>
<published>2018-06-07T19:34:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=40352e791c0c407ae260c294e04d81bd989e00a5'/>
<id>40352e791c0c407ae260c294e04d81bd989e00a5</id>
<content type='text'>
commit c568503ef02030f169c9e19204def610a3510918 upstream.

syzbot reports following splat:

BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450
 net/bridge/netfilter/ebt_stp.c:162
 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162
 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506
 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline]
 ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline]

The uninitialised access is
   xt_mtchk_param-&gt;nft_compat

... which should be set to 0.
Fix it by zeroing the struct beforehand, same for tgchk.

ip(6)tables targetinfo uses c99-style initialiser, so no change
needed there.

Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com
Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c568503ef02030f169c9e19204def610a3510918 upstream.

syzbot reports following splat:

BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450
 net/bridge/netfilter/ebt_stp.c:162
 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162
 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506
 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline]
 ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline]

The uninitialised access is
   xt_mtchk_param-&gt;nft_compat

... which should be set to 0.
Fix it by zeroing the struct beforehand, same for tgchk.

ip(6)tables targetinfo uses c99-style initialiser, so no change
needed there.

Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com
Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "sit: reload iphdr in ipip6_rcv"</title>
<updated>2018-07-11T14:26:42+00:00</updated>
<author>
<name>David S. Miller</name>
<email>davem@davemloft.net</email>
</author>
<published>2017-06-06T15:34:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5b8fcc075714b86fb8fe194bb463fed2998a8e85'/>
<id>5b8fcc075714b86fb8fe194bb463fed2998a8e85</id>
<content type='text'>
commit f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 upstream.

This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.

As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Cc: Luca Boccassi &lt;luca.boccassi@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 upstream.

This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.

As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Cc: Luca Boccassi &lt;luca.boccassi@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: verify the checksum of the first data segment in a new connection</title>
<updated>2018-06-26T00:08:07+00:00</updated>
<author>
<name>Frank van der Linden</name>
<email>fllinden@amazon.com</email>
</author>
<published>2018-06-12T23:09:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6caca347e4b007a645aa6b8bb950fa27b5e221d5'/>
<id>6caca347e4b007a645aa6b8bb950fa27b5e221d5</id>
<content type='text'>
[ Upstream commit 4fd44a98ffe0d048246efef67ed640fdf2098a62 ]

commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.

But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly.  These lower-level processing functions do not do any checksum
verification.

Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Frank van der Linden &lt;fllinden@amazon.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Tested-by: Balbir Singh &lt;bsingharora@gmail.com&gt;
Reviewed-by: Balbir Singh &lt;bsingharora@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4fd44a98ffe0d048246efef67ed640fdf2098a62 ]

commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.

But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly.  These lower-level processing functions do not do any checksum
verification.

Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Frank van der Linden &lt;fllinden@amazon.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Tested-by: Balbir Singh &lt;bsingharora@gmail.com&gt;
Reviewed-by: Balbir Singh &lt;bsingharora@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: allow PMTU exceptions to local routes</title>
<updated>2018-06-26T00:08:06+00:00</updated>
<author>
<name>Julian Anastasov</name>
<email>ja@ssi.bg</email>
</author>
<published>2018-06-10T23:02:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c66919125757e2d336de0ac467f8358aca0c1c5b'/>
<id>c66919125757e2d336de0ac467f8358aca0c1c5b</id>
<content type='text'>
[ Upstream commit 0975764684487bf3f7a47eef009e750ea41bd514 ]

IPVS setups with local client and remote tunnel server need
to create exception for the local virtual IP. What we do is to
change PMTU from 64KB (on "lo") to 1460 in the common case.

Suggested-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Fixes: 7343ff31ebf0 ("ipv6: Don't create clones of host routes.")
Signed-off-by: Julian Anastasov &lt;ja@ssi.bg&gt;
Acked-by: David Ahern &lt;dsahern@gmail.com&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0975764684487bf3f7a47eef009e750ea41bd514 ]

IPVS setups with local client and remote tunnel server need
to create exception for the local virtual IP. What we do is to
change PMTU from 64KB (on "lo") to 1460 in the common case.

Suggested-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Fixes: 7343ff31ebf0 ("ipv6: Don't create clones of host routes.")
Signed-off-by: Julian Anastasov &lt;ja@ssi.bg&gt;
Acked-by: David Ahern &lt;dsahern@gmail.com&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>xfrm6: avoid potential infinite loop in _decode_session6()</title>
<updated>2018-06-26T00:08:05+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2018-05-12T09:49:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c8197f96bcbe89bb108c0741ce5864bb7734486e'/>
<id>c8197f96bcbe89bb108c0741ce5864bb7734486e</id>
<content type='text'>
[ Upstream commit d9f92772e8ec388d070752ee8f187ef8fa18621f ]

syzbot found a way to trigger an infinitie loop by overflowing
@offset variable that has been forced to use u16 for some very
obscure reason in the past.

We probably want to look at NEXTHDR_FRAGMENT handling which looks
wrong, in a separate patch.

In net-next, we shall try to use skb_header_pointer() instead of
pskb_may_pull().

watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553]
Modules linked in:
irq event stamp: 13885653
hardirqs last  enabled at (13885652): [&lt;ffffffff878009d5&gt;] restore_regs_and_return_to_kernel+0x0/0x2b
hardirqs last disabled at (13885653): [&lt;ffffffff87800905&gt;] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625
softirqs last  enabled at (13614028): [&lt;ffffffff84df0809&gt;] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline]
softirqs last  enabled at (13614028): [&lt;ffffffff84df0809&gt;] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825
softirqs last disabled at (13614032): [&lt;ffffffff84df1b6f&gt;] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942
CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101
RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006
RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277
RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8
R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f
R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8
FS:  0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150
 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368
 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline]
 icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372
 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551
 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711
 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785
 napi_frags_finish net/core/dev.c:5226 [inline]
 napi_gro_frags+0x631/0xc40 net/core/dev.c:5299
 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996
 call_write_iter include/linux/fs.h:1784 [inline]
 do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680
 do_iter_write+0x185/0x5f0 fs/read_write.c:959
 vfs_writev+0x1c7/0x330 fs/read_write.c:1004
 do_writev+0x112/0x2f0 fs/read_write.c:1039
 __do_sys_writev fs/read_write.c:1112 [inline]
 __se_sys_writev fs/read_write.c:1109 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Cc: Nicolas Dichtel &lt;nicolas.dichtel@6wind.com&gt;
Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d9f92772e8ec388d070752ee8f187ef8fa18621f ]

syzbot found a way to trigger an infinitie loop by overflowing
@offset variable that has been forced to use u16 for some very
obscure reason in the past.

We probably want to look at NEXTHDR_FRAGMENT handling which looks
wrong, in a separate patch.

In net-next, we shall try to use skb_header_pointer() instead of
pskb_may_pull().

watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553]
Modules linked in:
irq event stamp: 13885653
hardirqs last  enabled at (13885652): [&lt;ffffffff878009d5&gt;] restore_regs_and_return_to_kernel+0x0/0x2b
hardirqs last disabled at (13885653): [&lt;ffffffff87800905&gt;] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625
softirqs last  enabled at (13614028): [&lt;ffffffff84df0809&gt;] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline]
softirqs last  enabled at (13614028): [&lt;ffffffff84df0809&gt;] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825
softirqs last disabled at (13614032): [&lt;ffffffff84df1b6f&gt;] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942
CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101
RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006
RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277
RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8
R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f
R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8
FS:  0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150
 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368
 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline]
 icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372
 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551
 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711
 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785
 napi_frags_finish net/core/dev.c:5226 [inline]
 napi_gro_frags+0x631/0xc40 net/core/dev.c:5299
 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996
 call_write_iter include/linux/fs.h:1784 [inline]
 do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680
 do_iter_write+0x185/0x5f0 fs/read_write.c:959
 vfs_writev+0x1c7/0x330 fs/read_write.c:1004
 do_writev+0x112/0x2f0 fs/read_write.c:1039
 __do_sys_writev fs/read_write.c:1112 [inline]
 __se_sys_writev fs/read_write.c:1109 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Cc: Nicolas Dichtel &lt;nicolas.dichtel@6wind.com&gt;
Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vrf: check the original netdevice for generating redirect</title>
<updated>2018-06-13T14:16:43+00:00</updated>
<author>
<name>Stephen Suryaputra</name>
<email>ssuryaextr@gmail.com</email>
</author>
<published>2018-06-01T04:05:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=869584ef0984bd88c25a0acd4757b80df7050a47'/>
<id>869584ef0984bd88c25a0acd4757b80df7050a47</id>
<content type='text'>
[ Upstream commit 2f17becfbea5e9a0529b51da7345783e96e69516 ]

Use the right device to determine if redirect should be sent especially
when using vrf. Same as well as when sending the redirect.

Signed-off-by: Stephen Suryaputra &lt;ssuryaextr@gmail.com&gt;
Acked-by: David Ahern &lt;dsahern@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2f17becfbea5e9a0529b51da7345783e96e69516 ]

Use the right device to determine if redirect should be sent especially
when using vrf. Same as well as when sending the redirect.

Signed-off-by: Stephen Suryaputra &lt;ssuryaextr@gmail.com&gt;
Acked-by: David Ahern &lt;dsahern@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
