linux-toradex.git/net/iucv, branch v5.3.2

net/af_iucv: mark expected switch fall-throughs

2019-07-29T17:26:14+00:00

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

net/iucv/af_iucv.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 537:3, 519:6, 2246:6, 510:6

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.

Reported-by: Geert Uytterhoeven 
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Kees Cook 
Signed-off-by: David S. Miller

net/af_iucv: always register net_device notifier

2019-06-19T20:26:33+00:00

Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still
open HiperTransport-based connections. For robust operation these
connections require the af_iucv_netdev_notifier, so register it
unconditionally.

Also handle any error that register_netdevice_notifier() returns.

Fixes: 9fbd87d41392 ("af_iucv: handle netdev events")
Signed-off-by: Julian Wiedmann 
Reviewed-by: Ursula Braun 
Signed-off-by: David S. Miller

net/af_iucv: build proper skbs for HiperTransport

2019-06-19T20:26:33+00:00

The HiperSockets-based transport path in af_iucv is still too closely
entangled with qeth.
With commit a647a02512ca ("s390/qeth: speed-up L3 IQD xmit"), the
relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid
unnecessary skb head expansions, af_iucv must learn to
1) respect dev->needed_headroom when allocating skbs, and
2) drop the header reference before cloning the skb.

While at it, also stop hard-coding the LL-header creation stage and just
use the appropriate helper.

Fixes: a647a02512ca ("s390/qeth: speed-up L3 IQD xmit")
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

net/af_iucv: remove GFP_DMA restriction for HiperTransport

2019-06-19T20:26:33+00:00

af_iucv sockets over z/VM IUCV require that their skbs are allocated
in DMA memory. This restriction doesn't apply to connections over
HiperSockets. So only set this limit for z/VM IUCV sockets, thereby
increasing the likelihood that the large (and linear!) allocations for
HiperTransport messages succeed.

Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport")
Signed-off-by: Julian Wiedmann 
Reviewed-by: Ursula Braun 
Reviewed-by: Hendrik Brueckner 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program if
  not write to the free software foundation inc 675 mass ave cambridge
  ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 77 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Armijn Hemel 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

iucv: Remove SKB list assumptions.

2018-11-11T00:55:11+00:00

Eliminate the assumption that SKBs and SKB list heads can
be cast to eachother in SKB list handling code.

This change also appears to fix a bug since the list->next pointer is
sampled outside of holding the SKB queue lock.

Signed-off-by: David S. Miller

Revert "net: simplify sock_poll_wait"

2018-10-23T17:57:06+00:00

This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317.

This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an
internal TCP socket for the initial handshake with the remote peer.
Whenever the SMC connection can not be established this TCP socket is
used as a fallback. All socket operations on the SMC socket are then
forwarded to the TCP socket. In case of poll, the file->private_data
pointer references the SMC socket because the TCP socket has no file
assigned. This causes tcp_poll to wait on the wrong socket.

Signed-off-by: Karsten Graul 
Signed-off-by: David S. Miller

net/af_iucv: locate IUCV header via skb_network_header()

2018-09-26T16:56:07+00:00

This patch attempts to untangle the TX and RX code in qeth from
af_iucv's respective HiperTransport path:
On the TX side, pointing skb_network_header() at the IUCV header
means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset
to access the header.
On the RX side, qeth pulls the (fake) L2 header off the skb like any
normal ethernet driver would. This makes working with the IUCV header
in af_iucv easier, since we no longer have to assume a fixed skb layout.

While at it, replace the open-coded length checks in af_iucv's RX path
with pskb_may_pull().

Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller