Pull networking updates from Paolo Abeni:
 "This includes a significant number of low-priority fixes - especially
  in the NIC drivers area - that we deferred from the last few RCs in
  the previous cycle, which can't be easily outlined in the synopsis
  below.

  Core & protocols:

   - Continue the work on removing rtnl_lock dependencies:
      - per-netns ARP and ND neighbour tables, with the default settings
        now configurable per netns (inheritance from init_net is
        controlled by the new net.core.neigh_inherit_init_net sysctl)
      - RCU-protected configuration and rtnl_lock-less fill_info() for
        hsr, netkit, sit, vlan and vxlan devices
      - per-netns device unregistration for ip tunnel and gre devices
      - use the netdev instance lock instead of rtnl_lock when reading
        speed and duplex via sysfs
      - batch the flushing of uncached routes at device unregistration
        time, relieving rtnl_lock contention on netns dismantle.

   - Add hardware pacing offload support, admin-controlled via a new
     rtnetlink attribute, with sch_fq integration (implemented in idpf).

   - Re-segment BIG TCP GSO packets into GSO packets fitting the egress
     device limits instead of plain MSS-sized segments, improving
     throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.

   - Generate RSS keys that spread flows over all the RX queues; the
     previous random keys could leave some queues unused.

   - Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
     fdb entries and consider only VLAN members when flooding, for ~10%
     more Mpps in the fdb forwarding path.

   - A few TCP/IP performance improvements aimed at efficient cache
     usage and reducing contention.

   - Add the TCP ROCCET congestion control, a CUBIC variant aimed at
     avoiding bufferbloat in cellular networks.

   - Continue the conversion of getsockopt callbacks to sockopt_t.

   - Add an ethtool command to list the front-facing ports of an
     interface, including SFP cages and modules, using the phy_port
     representation.

   - Enable BIG TCP support for bareudp tunnels.

   - Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
     transitions (listen() + shutdown() + connect() and connect() +
     connect(AF_UNSPEC) + listen()).

   - Remove most BUG_ON()s from core packet processing, replacing them
     with error paths.

  Wireless:

   - Latency improvements, including lockless station get/dump and
     beacon updates, plus RTNL reduction and locking cleanups.

   - Infrastructure for non-station TX/RX with MLO.

   - NAN (Wi-Fi Aware) Instant Communication support and other NAN
     improvements.

   - Control frame Integrity Protocol (CIP) and protected TWT support.

   - Improvements for AP regulatory checks.

  Netfilter:

   - Disable br_netfilter in user namespaces and schedule it for removal
     in 2027.

   - Restrict the raw table in nft_compat to the specific family, hook
     and priority.

   - Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
     versa).

   - Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
     integration with memcg.

   - Allow discovering conntrack zone filtering support in ctnetlink
     dumps, and fix nfnetlink_hook handling of large dumps.

  Deletions:

   - Move the LLC type 2 sockets out of tree. There are no known users
     and the code attracts a never-ending stream of LLM-driven fixes.

  Device drivers:

   - New drivers:
      - Meta Platforms NIC (mpnic), the second-generation NIC from Meta
      - initial skeleton of the Nebula-matrix NICs driver (nbl)
      - X-Powers AC200/AC300 Fast Ethernet PHYs

   - Ethernet high-speed NICs:
      - Intel:
         - i40e: XDP metadata support for RX hash and VLAN tag
         - ice: expose the E825 TSPLL state via the DPLL subsystem
      - nVidia/Mellanox:
         - move the data direct infrastructure from IB to core, in
           preparation for netdev support.
         - reduce the memory used per offloaded TC rule
      - Meta (fbnic):
         - support large io_uring zero-copy RX buffers
      - Microsoft vNIC (mana):
         - add BQL support

   - Ethernet NICs consumer, and embedded:
      - Airoha:
         - LRO offload support
      - Cadence (macb):
         - context swapping for ringparam and MTU changes, avoiding
           buffer loss under memory pressure
      - Mucse (rnpgbe):
         - TX/RX and link status support
      - NXP (enetc):
         - SR-IOV improvements and VF support for ENETC v4
      - Qualcomm (ppe):
         - IPQ5424 support
      - Realtek PCI (r8169):
         - phylink support
         - RSS support for RTL8127
      - Renesas (ravb):
         - gPTP support for R-Car Gen4
      - Synopsys (stmmac):
         - XDP multi-buffer support on the TX side
         - tc mqprio hw queue priority offload
         - support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
           DP1000 and Qualcomm sa8255p

   - Ethernet switches:
      - Mediatek (mt7530):
         - fast age and change conduit support
      - Microchip (ksz):
         - support for KSZ8995XA/KS8995XA
      - Microchip (lan966x):
         - PCIe FDMA support, ~20x throughput increase in PCIe endpoint
      - Microchip (sparx5):
         - Time Aware Shaper (taprio) offload
      - Motorcomm (yt921x):
         - LED and SerDes PCS support
      - Realtek (rtl8365mb):
         - EEE support

   - Ethernet PHYs:
      - Broadcom:
         - enable jumbo frames on BCM54xx
      - Realtek:
         - support for RTL8261CE_CG and RTL8261D_VM
         - MDIO support for RTL838x and RTL839x

   - WiFi drivers:
      - Broadcom (brcmfmac):
         - FT/OKC roaming offload
      - Intel (iwlwifi):
         - UHR sniffer support
         - support for newer UEFI/BIOS tables
      - MediaTek (mt76):
         - mt7925 NAN improvements
         - offchannel/scan improvements and MLO fixes
      - Morse Micro (mm81x):
         - monitor mode support
      - Qualcomm (ath12k):
         - IPQ5332 platform infrastructure
      - Realtek (rtw88):
         - RTL8723BS support
         - SDIO TX performance improvements
      - Realtek (rtw89):
         - P2P_DEVICE support
         - BT-coex updates for RTL8922D

   - Bluetooth:
      - move H:4 reassembly into the Bluetooth core
      - add generic support for vendor packets
      - MGMT: add security level changed event

   - Bluetooth drivers:
      - btusb: support Bulk Serialization Mode
      - Intel: support Draco and Titan Lake, allow unsigned firmware
      - Mediatek: MT7928 support
      - Qualcomm: QCC2072 support
      - Broadcom: Synaptics 4384 support"

* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
  Bluetooth: btusb: disable by default Qualcomm multi-subsystem
  tipc: fix broadcast sender hang on last acker departure
  tipc: fix use-after-free of broadcast reception link at node release
  r8169: clear TX LPI on RTL8168h at link up after phylink conversion
  tun: Require CAP_NET_ADMIN to attach to an ownerless device
  net/sched/sch_cake: drop dead nla_nest_end() error check
  net/sched/sch_cake: widen buffer_used to u64
  net/sched/sch_cake: reduce parent backlog when clearing a tin
  net/sched/sch_cake: serialize reconfiguration with the datapath
  tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
  net/mlx5e: Stop asserting for RTNL when closing channels
  net: shrink the payload-only part of skb dataref to one bit
  net: wwan: iosm: validate msg_head before indexing msg_ring
  net: bgmac: rate limit RX error messages
  selftests: net: veth: test XDP_TX to a peer with GRO enabled
  veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
  pppoe: delete session hash entries by pointer match
  net: lan969x: don't disable hardirqs in fdma tx clear
  net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
  net: lan969x: fix DSM calendar for empty taxis
  ...

SOCK_NOSPACE lives in sk->sk_socket->flags and is manipulated from
about thirty places in the tree, all of them open coding the
sk->sk_socket dereference, some with a NULL check, some without,
and some reaching the struct socket by yet another path.

Add sk_set_nospace() and sk_clear_nospace() helpers and convert the
core networking setters and clearers to them; the following patches
convert the remaining subsystem callers so that
"git grep _bit(SOCK_NOSPACE" only reports the two helpers and the
remaining test_bit() sites.

Callers that had no NULL check are all called from user context with a
socket attached, so folding the check into the helpers only makes them
more robust.

No functional change intended.

This is a preparation patch: a following one gives TCP a cheaper
private copy of this bit, and needs a single choke point to keep it
in sync.

Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Eric Dumazet <edumazet@kernel.org>
Link: https://patch.msgid.link/20260929071743.23624-3-edumazet@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

strp->aborted is never set, so the aborts counter is also never
updated. Remove them, and hard-code a 0 in kcm_stats_seq_show() to
preserve the user-visible format.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/53d83ac52f192a7cf2a8decaf72d454cbb86211a.1790702233.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

FD_PREPARE() releases the fd as soon as the file expression fails. The
fd either holds the descriptor or the error. The separate field is
redundant. Make fd and file plain members and struct fd_prepare simpler.

Callers of FD_PREPARE() get a const pointer to the guard. Simplify all
users as they can now easily access the trivial struct.

No functional changes.

Link: https://patch.msgid.link/20260917-work-file-fd_prepare-v1-4-b87534ca49f3@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>

kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which
prevents CPU migration, but does not establish an RCU read-side
critical section. Consequently, BPF map operations can trigger
WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser
program.

Hold the RCU read lock while running the program.

Fixes: 9b73896a81dc ("kcm: Use stream parser")
Reported-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Junseo Lim <zirajs7@gmail.com>
Link: https://patch.msgid.link/20260813035136.106167-1-zirajs7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge in late fixes in preparation for the net-next PR.

Conflicts:

net/tls/tls_sw.c
  406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms")
  79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path")

drivers/net/ethernet/microsoft/mana/mana_en.c
  f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
  d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kcm_attach() replaces a live lower TCP socket's sk_data_ready and
sk_write_space callbacks with KCM handlers, and kcm_unattach() restores
them later. Those callback-pointer updates are still plain stores even
though the same fields can be read and invoked concurrently on other
CPUs.

If another CPU observes an older callback snapshot after the live field
has already been restored, callback execution can run with a mismatched
target and sk_user_data state, leading to stale or misdirected wakeups.

Use WRITE_ONCE() for the callback replacement and restore operations so
these shared callback fields follow the same visibility contract already
established by the earlier 4022 fixes.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260611053543.2429462-1-runyu.xiao@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Convert KCM socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.

Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-4-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.

When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:

  head skb (msg being assembled, NOT yet in sk_write_queue)
  +-----------+
  | frags[17] |  (MAX_SKB_FRAGS, all filled with data)
  | frag_list-+--> tskb
  +-----------+    +----------+
                   | frags[0] |  (empty! copy failed before filling)
                   +----------+

For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:

  WARN_ON(!skb_shinfo(skb)->nr_frags)

TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.

Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.

Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.

There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].

[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa

Reported-by: syzbot+52624bdfbf2746d37d70@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000269a1405a12fdc77@google.com/T/
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260219014256.370092-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Replace busylock at the Tx queuing layer with a lockless list.

     Resulting in a 300% (4x) improvement on heavy TX workloads, sending
     twice the number of packets per second, for half the cpu cycles.

   - Allow constantly busy flows to migrate to a more suitable CPU/NIC
     queue.

     Normally we perform queue re-selection when flow comes out of idle,
     but under extreme circumstances the flows may be constantly busy.

     Add sysctl to allow periodic rehashing even if it'd risk packet
     reordering.

   - Optimize the NAPI skb cache, make it larger, use it in more paths.

   - Attempt returning Tx skbs to the originating CPU (like we already
     did for Rx skbs).

   - Various data structure layout and prefetch optimizations from Eric.

   - Remove ktime_get() from the recvmsg() fast path, ktime_get() is
     sadly quite expensive on recent AMD machines.

   - Extend threaded NAPI polling to allow the kthread busy poll for
     packets.

   - Make MPTCP use Rx backlog processing. This lowers the lock
     pressure, improving the Rx performance.

   - Support memcg accounting of MPTCP socket memory.

   - Allow admin to opt sockets out of global protocol memory accounting
     (using a sysctl or BPF-based policy). The global limits are a poor
     fit for modern container workloads, where limits are imposed using
     cgroups.

   - Improve heuristics for when to kick off AF_UNIX garbage collection.

   - Allow users to control TCP SACK compression, and default to 33% of
     RTT.

   - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
     unnecessarily aggressive rcvbuf growth and overshot when the
     connection RTT is low.

   - Preserve skb metadata space across skb_push / skb_pull operations.

   - Support for IPIP encapsulation in the nftables flowtable offload.

   - Support appending IP interface information to ICMP messages (RFC
     5837).

   - Support setting max record size in TLS (RFC 8449).

   - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

   - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

   - Let users configure the number of write buffers in SMC.

   - Add new struct sockaddr_unsized for sockaddr of unknown length,
     from Kees.

   - Some conversions away from the crypto_ahash API, from Eric Biggers.

   - Some preparations for slimming down struct page.

   - YAML Netlink protocol spec for WireGuard.

   - Add a tool on top of YAML Netlink specs/lib for reporting commonly
     computed derived statistics and summarized system state.

  Driver API:

   - Add CAN XL support to the CAN Netlink interface.

   - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
     defined by the OPEN Alliance's "Advanced diagnostic features for
     100BASE-T1 automotive Ethernet PHYs" specification.

   - Add DPLL phase-adjust-gran pin attribute (and implement it in
     zl3073x).

   - Refactor xfrm_input lock to reduce contention when NIC offloads
     IPsec and performs RSS.

   - Add info to devlink params whether the current setting is the
     default or a user override. Allow resetting back to default.

   - Add standard device stats for PSP crypto offload.

   - Leverage DSA frame broadcast to implement simple HSR frame
     duplication for a lot of switches without dedicated HSR offload.

   - Add uAPI defines for 1.6Tbps link modes.

  Device drivers:

   - Add Motorcomm YT921x gigabit Ethernet switch support.

   - Add MUCSE driver for N500/N210 1GbE NIC series.

   - Convert drivers to support dedicated ops for timestamping control,
     and away from the direct IOCTL handling. While at it support GET
     operations for PHY timestamping.

   - Add (and convert most drivers to) a dedicated ethtool callback for
     reading the Rx ring count.

   - Significant refactoring efforts in the STMMAC driver, which
     supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support PPS in/out on all pins
      - Intel (100G, ice, idpf):
         - ice: implement standard ethtool and timestamping stats
         - i40e: support setting the max number of MAC addresses per VF
         - iavf: support RSS of GTP tunnels for 5G and LTE deployments
      - nVidia/Mellanox (mlx5):
         - reduce downtime on interface reconfiguration
         - disable being an XDP redirect target by default (same as
           other drivers) to avoid wasting resources if feature is
           unused
      - Meta (fbnic):
         - add support for Linux-managed PCS on 25G, 50G, and 100G links
      - Wangxun:
         - support Rx descriptor merge, and Tx head writeback
         - support Rx coalescing offload
         - support 25G SPF and 40G QSFP modules

   - Ethernet virtual:
      - Google (gve):
         - allow ethtool to configure rx_buf_len
         - implement XDP HW RX Timestamping support for DQ descriptor
           format
      - Microsoft vNIC (mana):
         - support HW link state events
         - handle hardware recovery events when probing the device

   - Ethernet NICs consumer, and embedded:
      - usbnet: add support for Byte Queue Limits (BQL)
      - AMD (amd-xgbe):
         - add device selftests
      - NXP (enetc):
         - add i.MX94 support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - bcmasp: add support for PHY-based Wake-on-LAN
      - Broadcom switches (b53):
         - support port isolation
         - support BCM5389/97/98 and BCM63XX ARL formats
      - Lantiq/MaxLinear switches:
         - support bridge FDB entries on the CPU port
         - use regmap for register access
         - allow user to enable/disable learning
         - support Energy Efficient Ethernet
         - support configuring RMII clock delays
         - add tagging driver for MaxLinear GSW1xx switches
      - Synopsys (stmmac):
         - support using the HW clock in free running mode
         - add Eswin EIC7700 support
         - add Rockchip RK3506 support
         - add Altera Agilex5 support
      - Cadence (macb):
         - cleanup and consolidate descriptor and DMA address handling
         - add EyeQ5 support
      - TI:
         - icssg-prueth: support AF_XDP
      - Airoha access points:
         - add missing Ethernet stats and link state callback
         - add AN7583 support
         - support out-of-order Tx completion processing
      - Power over Ethernet:
         - pd692x0: preserve PSE configuration across reboots
         - add support for TPS23881B devices

   - Ethernet PHYs:
      - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
      - Support 50G SerDes and 100G interfaces in Linux-managed PHYs
      - micrel:
         - support for non PTP SKUs of lan8814
         - enable in-band auto-negotiation on lan8814
      - realtek:
         - cable testing support on RTL8224
         - interrupt support on RTL8221B
      - motorcomm: support for PHY LEDs on YT853
      - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
      - mscc: support for PHY LED control

   - CAN drivers:
      - m_can: add support for optional reset and system wake up
      - remove can_change_mtu() obsoleted by core handling
      - mcp251xfd: support GPIO controller functionality

   - Bluetooth:
      - add initial support for PASTa

   - WiFi:
      - split ieee80211.h file, it's way too big
      - improvements in VHT radiotap reporting, S1G, Channel Switch
        Announcement handling, rate tracking in mesh networks
      - improve multi-radio monitor mode support, and add a cfg80211
        debugfs interface for it
      - HT action frame handling on 6 GHz
      - initial chanctx work towards NAN
      - MU-MIMO sniffer improvements

   - WiFi drivers:
      - RealTek (rtw89):
         - support USB devices RTL8852AU and RTL8852CU
         - initial work for RTL8922DE
         - improved injection support
      - Intel:
         - iwlwifi: new sniffer API support
      - MediaTek (mt76):
         - WED support for >32-bit DMA
         - airoha NPU support
         - regdomain improvements
         - continued WiFi7/MLO work
      - Qualcomm/Atheros:
         - ath10k: factory test support
         - ath11k: TX power insertion support
         - ath12k: BSS color change support
         - ath12k: statistics improvements
      - brcmfmac: Acer A1 840 tablet quirk
      - rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
  net: page_pool: sanitise allocation order
  net: page pool: xa init with destroy on pp init
  net/mlx5e: Support XDP target xmit with dummy program
  net/mlx5e: Update XDP features in switch channels
  selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
  net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
  wireguard: netlink: generate netlink code
  wireguard: uapi: generate header with ynl-gen
  wireguard: uapi: move flag enums
  wireguard: uapi: move enum wg_cmd
  wireguard: netlink: add YNL specification
  selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
  selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
  selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
  selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
  selftests: drv-net: introduce Iperf3Runner for measurement use cases
  selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
  net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
  Documentation: net: dsa: mention simple HSR offload helpers
  Documentation: net: dsa: mention availability of RedBox
  ...