linux-toradex.git/net/mac80211/offchannel.c, branch v5.3.2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-22T12:59:24+00:00

Minor SPDX change conflict.

Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

mac80211: notify offchannel expire on mgmt_tx

2019-06-14T14:08:28+00:00

When the offchannel TX wait time expires, send the appropriate event.

Signed-off-by: James Prestwood 
Signed-off-by: Johannes Berg

mac80211: support scan features for improved scan privacy

2018-06-15T11:34:40+00:00

Support the new random SN and minimal probe request contents
scan flags for the case of software scan - for hardware scan
the drivers need to opt in, but may need to do only that,
depending on their implementation.

Signed-off-by: Johannes Berg 
Signed-off-by: Johannes Berg

mac80211: mark expected switch fall-throughs

2017-12-11T11:16:04+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in some cases I replaced "fall through on else" and
"otherwise fall through" comments with just a "fall through" comment,
which is what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Johannes Berg

mac80211: flush hw_roc_start work before cancelling the ROC

2017-09-05T14:25:07+00:00

When HW ROC is supported it is possible that after the HW notified
that the ROC has started, the ROC was cancelled and another ROC was
added while the hw_roc_start worker is waiting on the mutex (since
cancelling the ROC and adding another one also holds the same mutex).
As a result, the hw_roc_start worker will continue to run after the
new ROC is added but before it is actually started by the HW.
This may result in notifying userspace that the ROC has started before
it actually does, or in case of management tx ROC, in an attempt to
tx while not on the right channel.

In addition, when the driver will notify mac80211 that the second ROC
has started, mac80211 will warn that this ROC has already been
notified.

Fix this by flushing the hw_roc_start work before cancelling an ROC.

Cc: stable@vger.kernel.org
Signed-off-by: Avraham Stern 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg

networking: introduce and use skb_put_data()

2017-06-16T15:48:37+00:00

A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.

An spatch similar to the one for skb_put_zero() converts many
of the places using it:

    @@
    identifier p, p2;
    expression len, skb, data;
    type t, t2;
    @@
    (
    -p = skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    |
    -p = (t)skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, len);
    |
    -memcpy(p, data, len);
    )

    @@
    type t, t2;
    identifier p, p2;
    expression skb, data;
    @@
    t *p;
    ...
    (
    -p = skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    |
    -p = (t *)skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, sizeof(*p));
    |
    -memcpy(p, data, sizeof(*p));
    )

    @@
    expression skb, len, data;
    @@
    -memcpy(skb_put(skb, len), data, len);
    +skb_put_data(skb, data, len);

(again, manually post-processed to retain some comments)

Reviewed-by: Stephen Hemminger 
Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

mac80211: fix CMD_FRAME for AP_VLAN

2016-10-12T07:19:12+00:00

When using IEEE 802.11r FT OVER-DS roaming with AP_VLAN, hostapd needs to
send out a frame using CMD_FRAME for a station assigned to an AP_VLAN
interface.

Right now, the userspace needs to give the exact AP_VLAN interface index
for CMD_FRAME; hostapd does not do this. Additionally, userspace cannot
use GET_STATION to query the AP_VLAN ifidx, as while GET_STATION finds
stations assigned to AP_VLAN even if the AP iface is queried, it does not
return AP_VLAN ifidx (it returns the queried one).

This breaks IEEE 802.11r over_ds with vlans, as the reply frame does not
get out. This patch fixes this by using get_sta_bss for CMD_FRAME.

Signed-off-by: Michael Braun 
Signed-off-by: Johannes Berg

mac80211: add boilerplate code for start / stop NAN

2016-09-30T11:21:19+00:00

This code doesn't do much besides allowing to start and
stop the vif.

Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Ayala Beker 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg

cfg80211: add start / stop NAN commands

2016-09-30T11:21:14+00:00

This allows user space to start/stop NAN interface.
A NAN interface is like P2P device in a few aspects: it
doesn't have a netdev associated to it.
Add the new interface type and prevent operations that
can't be executed on NAN interface like scan.

Define several attributes that may be configured by user space
when starting NAN functionality (master preference and dual
band operation)

Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg