linux-toradex.git/net/mac80211/sta_info.c, branch v3.4.9 Linux kernel for Apalis and Colibri modules mac80211: fix non RCU-safe sta_list manipulation 2012-06-17T18:21:25+00:00 Arik Nemtsov arik@wizery.com 2012-06-03T20:32:32+00:00 073e100877a39f36163398cde868e98fa6d3f0a1 commit 794454ce72a298de6f4536ade597bdcc7dcde7c7 upstream. sta_info_cleanup locks the sta_list using rcu_read_lock however the delete operation isn't rcu safe. A race between sta_info_cleanup timer being called and a STA being removed can occur which leads to a panic while traversing sta_list. Fix this by switching to the RCU-safe versions. Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 794454ce72a298de6f4536ade597bdcc7dcde7c7 upstream.

sta_info_cleanup locks the sta_list using rcu_read_lock however
the delete operation isn't rcu safe. A race between sta_info_cleanup
timer being called and a STA being removed can occur which leads
to a panic while traversing sta_list. Fix this by switching to the
RCU-safe versions.

Reported-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mac80211: use compare_ether_addr on MAC addresses instead of memcmp 2012-03-05T20:38:31+00:00 Felix Fietkau nbd@openwrt.org 2012-03-01T14:22:09+00:00 888d04dfbe7e09f930fdaafb257cce2c54c9c3f3 Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Because of the constant size and guaranteed 16 bit alignment, the inline
compare_ether_addr function is much cheaper than calling memcmp.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: handle non-bufferable MMPDUs correctly 2012-02-29T19:14:54+00:00 Johannes Berg johannes.berg@intel.com 2012-02-27T11:18:30+00:00 02f2f1a951f87644166926862ec32fb13511e2f3 This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
This renames the IEEE80211_TX_CTL_POLL_RESPONSE
TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also
uses it for non-bufferable MMPDUs (all MMPDUs but
deauth, disassoc and action frames.)

Previously, mac80211 would let the MMPDU through
but not set the flag so drivers supporting some
hardware aids for avoiding the PS races would
then reject the frame.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: fix sta_info_flush() return value 2012-02-27T19:06:42+00:00 Johannes Berg johannes.berg@intel.com 2012-02-25T20:40:46+00:00 3431683759596409427b6726e582f3ee66082728 The comment for sta_info_flush() states "Returns the number of removed STA entries" but that isn't actually true. Consequently, the warning when a station is still around on interface removal can never trigger and this delayed finding the timer issue the previous patch fixed. Fix the return value here to make that warning useful again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
The comment for sta_info_flush() states
"Returns the number of removed STA entries"
but that isn't actually true. Consequently,
the warning when a station is still around
on interface removal can never trigger and
this delayed finding the timer issue the
previous patch fixed. Fix the return value
here to make that warning useful again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: add #ifdef CONFIG_MAC80211_VERBOSE_DEBUG for a debug printk 2012-02-08T20:26:33+00:00 Felix Fietkau nbd@openwrt.org 2012-02-07T11:45:44+00:00 79027596ff710f9662ccae5f5e85de43961420ed When not debugging mac80211 code, station state transitions do not need to show up in the kernel log. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
When not debugging mac80211 code, station state transitions do not need to
show up in the kernel log.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: remove dummy STA support 2012-02-06T19:50:37+00:00 Johannes Berg johannes.berg@intel.com 2012-01-20T12:55:24+00:00 7852e36186d2a1983c215836d7e3d7b8927c930d The dummy STA support was added because I didn't want to change the driver API at the time. Now that we have state transitions triggering station add/remove in the driver, we only call add once a station reaches ASSOCIATED, so we can remove the dummy station stuff again. While at it, tighten the RX check and accept only port control (EAP) frames from the AP station if it's not associated yet -- in other cases there's no race. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
The dummy STA support was added because I didn't
want to change the driver API at the time. Now
that we have state transitions triggering station
add/remove in the driver, we only call add once a
station reaches ASSOCIATED, so we can remove the
dummy station stuff again.

While at it, tighten the RX check and accept only
port control (EAP) frames from the AP station if
it's not associated yet -- in other cases there's
no race.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: implement sta_add/sta_remove in sta_state 2012-02-06T19:48:25+00:00 Johannes Berg johannes.berg@intel.com 2012-01-20T12:55:22+00:00 a4ec45a421b80bc36fd37578accf081f32527a7f Instead of maintaining separate sta_add/sta_remove callsites, implement it in sta_state when the driver has no sta_state implementation. The only behavioural change this should cause is in secure mesh mode: with this the station entries will only be created after the stations are set to AUTH. Given which drivers support mesh, this seems to not be a problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Instead of maintaining separate sta_add/sta_remove
callsites, implement it in sta_state when the driver
has no sta_state implementation.

The only behavioural change this should cause is in
secure mesh mode: with this the station entries will
only be created after the stations are set to AUTH.
Given which drivers support mesh, this seems to not
be a problem.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: add sta_state callback 2012-02-06T19:48:24+00:00 Johannes Berg johannes.berg@intel.com 2012-01-20T12:55:21+00:00 f09603a259ffef69ad4516a04eb06cd65ac522fe (based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
(based on Eliad's patch)

Add a callback to notify the low-level driver whenever
the state of a station changes. The driver is only
notified when the station is actually in the mac80211
hash table, not for pre-insert state transitions.

To allow the driver to replace sta_add/remove calls
with this, call extra transitions with the NOTEXIST
state.

This callback can fail, so we need to be careful in
handling it when a station is inserted, particularly
in the IBSS case where we still keep the station entry
around for mac80211 purposes.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: add NOTEXIST station state 2012-02-06T19:48:24+00:00 Johannes Berg johannes.berg@intel.com 2012-01-20T12:55:20+00:00 71ec375c75095002f36f083ceb32bbb8725734ae This will be used by drivers later if they need to have stations inserted all the time, in mac80211 has no purpose, is never used and sta_state starts out in NONE. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
This will be used by drivers later if they
need to have stations inserted all the time,
in mac80211 has no purpose, is never used
and sta_state starts out in NONE.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: simplify AP_VLAN handling 2012-02-06T19:48:24+00:00 Johannes Berg johannes.berg@intel.com 2012-01-20T12:55:18+00:00 077f49392819608084c6d8d20e3dcca230afe07d Setting keys and updating TKIP keys must use the BSS sdata (not AP_VLAN), so we translate. Move the translation into driver-ops wrappers instead of having it inline in the code to simplify the normal code flow. The same can be done for sta_add/remove which already does the translation in the wrapper. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Setting keys and updating TKIP keys must use the
BSS sdata (not AP_VLAN), so we translate. Move
the translation into driver-ops wrappers instead
of having it inline in the code to simplify the
normal code flow.

The same can be done for sta_add/remove which
already does the translation in the wrapper.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>