linux-toradex.git/net/mac80211, branch v5.13 Linux kernel for Apalis and Colibri modules mac80211: handle various extensible elements correctly 2021-06-18T11:25:49+00:00 Johannes Berg johannes.berg@intel.com 2021-06-18T10:41:45+00:00 652e8363bbc7d149fa194a5cbf30b1001c0274b0 Various elements are parsed with a requirement to have an exact size, when really we should only check that they have the minimum size that we need. Check only that and therefore ignore any additional data that they might carry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Various elements are parsed with a requirement to have an
exact size, when really we should only check that they have
the minimum size that we need. Check only that and therefore
ignore any additional data that they might carry.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: reset profile_periodicity/ema_ap 2021-06-18T11:25:49+00:00 Johannes Berg johannes.berg@intel.com 2021-06-18T10:41:49+00:00 bbc6f03ff26e7b71d6135a7b78ce40e7dee3d86a Apparently we never clear these values, so they'll remain set since the setting of them is conditional. Clear the values in the relevant other cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Apparently we never clear these values, so they'll remain set
since the setting of them is conditional. Clear the values in
the relevant other cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: minstrel_ht: fix sample time check 2021-06-18T09:35:29+00:00 Felix Fietkau nbd@nbd.name 2021-06-17T10:38:54+00:00 1236af327af476731aa548dfcbbefb1a3ec6726a We need to skip sampling if the next sample time is after jiffies, not before. This patch fixes an issue where in some cases only very little sampling (or none at all) is performed, leading to really bad data rates Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates

Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: drop multicast fragments 2021-06-09T14:17:45+00:00 Johannes Berg johannes.berg@intel.com 2021-06-09T14:13:06+00:00 a9799541ca34652d9996e45f80e8e03144c12949 These are not permitted by the spec, just drop them. Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
These are not permitted by the spec, just drop them.

Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: move interface shutdown out of wiphy lock 2021-06-09T14:09:21+00:00 Johannes Berg johannes.berg@intel.com 2021-06-08T09:32:30+00:00 f5baf287f5da5641099ad5c809b3b4ebfc08506d When reconfiguration fails, we shut down everything, but we cannot call cfg80211_shutdown_all_interfaces() with the wiphy mutex held. Since cfg80211 now calls it on resume errors, we only need to do likewise for where we call reconfig (whether directly or indirectly), but not under the wiphy lock. Cc: stable@vger.kernel.org Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When reconfiguration fails, we shut down everything, but we
cannot call cfg80211_shutdown_all_interfaces() with the wiphy
mutex held. Since cfg80211 now calls it on resume errors, we
only need to do likewise for where we call reconfig (whether
directly or indirectly), but not under the wiphy lock.

Cc: stable@vger.kernel.org
Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: fix 'reset' debugfs locking 2021-06-09T14:09:18+00:00 Johannes Berg johannes.berg@intel.com 2021-06-08T09:32:27+00:00 adaed1b9daf5a045be71e923e04b5069d2bee664 cfg80211 now calls suspend/resume with the wiphy lock held, and while there's a problem with that needing to be fixed, we should do the same in debugfs. Cc: stable@vger.kernel.org Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210608113226.14020430e449.I78e19db0a55a8295a376e15ac4cf77dbb4c6fb51@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
cfg80211 now calls suspend/resume with the wiphy lock
held, and while there's a problem with that needing
to be fixed, we should do the same in debugfs.

Cc: stable@vger.kernel.org
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210608113226.14020430e449.I78e19db0a55a8295a376e15ac4cf77dbb4c6fb51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: fix deadlock in AP/VLAN handling 2021-06-08T09:33:07+00:00 Johannes Berg johannes.berg@intel.com 2021-05-17T14:03:23+00:00 d5befb224edbe53056c2c18999d630dafb4a08b9 Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case Cc: stable@vger.kernel.org Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.

To fix this, we need to do two things:
 1) prevent changing iftype while AP_VLANs are up, we can't
    easily fix this case since cfg80211 already calls us with
    the wiphy mutex held, but change_interface() is relatively
    rare in drivers anyway, so changing iftype isn't used much
    (and userspace has to fall back to down/change/up anyway)
 2) pull the dev_close() loop over VLANs out of the wiphy mutex
    section in the normal stop case

Cc: stable@vger.kernel.org
Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: Fix NULL ptr deref for injected rate info 2021-05-31T19:40:17+00:00 Mathy Vanhoef Mathy.Vanhoef@kuleuven.be 2021-05-30T13:32:26+00:00 bddc0c411a45d3718ac535a070f349be8eca8d48 The commit cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") moved the code to validate the radiotap header from ieee80211_monitor_start_xmit to ieee80211_parse_tx_radiotap. This made is possible to share more code with the new Tx queue selection code for injected frames. But at the same time, it now required the call of ieee80211_parse_tx_radiotap at the beginning of functions which wanted to handle the radiotap header. And this broke the rate parser for radiotap header parser. The radiotap parser for rates is operating most of the time only on the data in the actual radiotap header. But for the 802.11a/b/g rates, it must also know the selected band from the chandef information. But this information is only written to the ieee80211_tx_info at the end of the ieee80211_monitor_start_xmit - long after ieee80211_parse_tx_radiotap was already called. The info->band information was therefore always 0 (NL80211_BAND_2GHZ) when the parser code tried to access it. For a 5GHz only device, injecting a frame with 802.11a rates would cause a NULL pointer dereference because local->hw.wiphy->bands[NL80211_BAND_2GHZ] would most likely have been NULL when the radiotap parser searched for the correct rate index of the driver. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Fixes: cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> [sven@narfation.org: added commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20210530133226.40587-1-sven@narfation.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The commit cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx
queue") moved the code to validate the radiotap header from
ieee80211_monitor_start_xmit to ieee80211_parse_tx_radiotap. This made is
possible to share more code with the new Tx queue selection code for
injected frames. But at the same time, it now required the call of
ieee80211_parse_tx_radiotap at the beginning of functions which wanted to
handle the radiotap header. And this broke the rate parser for radiotap
header parser.

The radiotap parser for rates is operating most of the time only on the
data in the actual radiotap header. But for the 802.11a/b/g rates, it must
also know the selected band from the chandef information. But this
information is only written to the ieee80211_tx_info at the end of the
ieee80211_monitor_start_xmit - long after ieee80211_parse_tx_radiotap was
already called. The info->band information was therefore always 0
(NL80211_BAND_2GHZ) when the parser code tried to access it.

For a 5GHz only device, injecting a frame with 802.11a rates would cause a
NULL pointer dereference because local->hw.wiphy->bands[NL80211_BAND_2GHZ]
would most likely have been NULL when the radiotap parser searched for the
correct rate index of the driver.

Cc: stable@vger.kernel.org
Reported-by: Ben Greear <greearb@candelatech.com>
Fixes: cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue")
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
[sven@narfation.org: added commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20210530133226.40587-1-sven@narfation.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: fix skb length check in ieee80211_scan_rx() 2021-05-31T19:39:10+00:00 Du Cheng ducheng2@gmail.com 2021-05-10T04:16:49+00:00 e298aa358f0ca658406d524b6639fe389cb6e11e Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results") Reported-by: syzbot+405843667e93b9790fc1@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210510041649.589754-1-ducheng2@gmail.com [style fixes, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Replace hard-coded compile-time constants for header length check
with dynamic determination based on the frame type. Otherwise, we
hit a validation WARN_ON in cfg80211 later.

Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results")
Reported-by: syzbot+405843667e93b9790fc1@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210510041649.589754-1-ducheng2@gmail.com
[style fixes, reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: remove warning in ieee80211_get_sband() 2021-05-31T19:27:05+00:00 Johannes Berg johannes.berg@intel.com 2021-05-17T14:47:17+00:00 0ee4d55534f82a0624701d0bb9fc2304d4529086 Syzbot reports that it's possible to hit this from userspace, by trying to add a station before any other connection setup has been done. Instead of trying to catch this in some other way simply remove the warning, that will appropriately reject the call from userspace. Reported-by: syzbot+7716dbc401d9a437890d@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210517164715.f537da276d17.Id05f40ec8761d6a8cc2df87f1aa09c651988a586@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Syzbot reports that it's possible to hit this from userspace,
by trying to add a station before any other connection setup
has been done. Instead of trying to catch this in some other
way simply remove the warning, that will appropriately reject
the call from userspace.

Reported-by: syzbot+7716dbc401d9a437890d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210517164715.f537da276d17.Id05f40ec8761d6a8cc2df87f1aa09c651988a586@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>