linux-toradex.git/net/mac80211, branch v5.18-rc5 Linux kernel for Apalis and Colibri modules mac80211: fix ht_capa printout in debugfs 2022-04-11T09:57:27+00:00 Ben Greear greearb@candelatech.com 2022-04-06T17:56:59+00:00 fb4bccd863ccccd36ad000601856609e259a1859 Don't use sizeof(pointer) when calculating scnprintf offset. Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs") Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com [correct the Fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Don't use sizeof(pointer) when calculating scnprintf offset.

Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com
[correct the Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: update bssid_indicator in ieee80211_assign_beacon 2022-03-15T10:50:33+00:00 Lorenzo Bianconi lorenzo@kernel.org 2022-02-24T11:55:00+00:00 dde78aa520155316f31fca1b0f4dfcb779151799 Update bssid_indicator in ieee80211_bss_conf according to the number of bssid in the set. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/f92317e002fca9933f05a445fcefb4f53291d601.1645702516.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Update bssid_indicator in ieee80211_bss_conf according to the
number of bssid in the set.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/f92317e002fca9933f05a445fcefb4f53291d601.1645702516.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: MBSSID channel switch 2022-03-15T10:41:22+00:00 John Crispin john@phrozen.org 2022-02-24T11:54:59+00:00 c9eb90a56842a95351ee2d03933b1d8e36addc38 Trigger ieee80211_csa_finish() on the non-transmitting interfaces when channel switch concludes on the transmitting interface. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Trigger ieee80211_csa_finish() on the non-transmitting interfaces
when channel switch concludes on the transmitting interface.

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: MBSSID beacon handling in AP mode 2022-03-15T10:36:26+00:00 Lorenzo Bianconi lorenzo@kernel.org 2022-02-24T11:54:58+00:00 2b3171c6fe0af24b5506e061525e08917a2f744a Add new fields in struct beacon_data to store all MBSSID elements. Generate a beacon template which includes all MBSSID elements. Move CSA offset to reflect the MBSSID element length. Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Money Wang <money.wang@mediatek.com> Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org [small cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Add new fields in struct beacon_data to store all MBSSID elements.
Generate a beacon template which includes all MBSSID elements.
Move CSA offset to reflect the MBSSID element length.

Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Money Wang <money.wang@mediatek.com>
Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org
[small cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: always have ieee80211_sta_restart() 2022-03-15T10:30:21+00:00 Johannes Berg johannes.berg@intel.com 2022-03-12T21:19:58+00:00 3fa5a0f5b0d69e31c6476cd81afeca3cc25a4927 When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When CONFIG_PM isn't defined we don't have the function
ieee80211_sta_restart() compiled in, but we always need
it now for firmware restart. Move it out of the ifdef.

Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart")
Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2022-03-11T21:00:17+00:00 Jakub Kicinski kuba@kernel.org 2022-03-11T21:00:16+00:00 0b3660695e80d53d1bab5b458f3a897a2c427a59 Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Johannes Berg says:

====================
brcmfmac
 * add BCM43454/6 support

rtw89
 * add support for 160 MHz channels and 6 GHz band
 * hardware scan support

iwlwifi
 * support UHB TAS enablement via BIOS
 * remove a bunch of W=1 warnings
 * add support for channel switch offload
 * support 32 Rx AMPDU sessions in newer devices
 * add support for a couple of new devices
 * add support for band disablement via BIOS

mt76
 * mt7915 thermal management improvements
 * SAR support for more mt76 drivers
 * mt7986 wmac support on mt7915

ath11k
 * debugfs interface to configure firmware debug log level
 * debugfs interface to test Target Wake Time (TWT)
 * provide 802.11ax High Efficiency (HE) data via radiotap

ath9k
 * use hw_random API instead of directly dumping into random.c

wcn36xx
 * fix wcn3660 to work on 5 GHz band

ath6kl
 * add device ID for WLU5150-D81

cfg80211/mac80211
 * initial EHT (from 802.11be) support
   (EHT rates, 320 MHz, larger block-ack)
 * support disconnect on HW restart

* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
  mac80211: Add support to trigger sta disconnect on hardware restart
  mac80211: fix potential double free on mesh join
  mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
  nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
  mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  rtw89: 8852c: process logic efuse map
  rtw89: 8852c: process efuse of phycap
  rtw89: support DAV efuse reading operation
  rtw89: 8852c: add chip::dle_mem
  rtw89: add page_regs to handle v1 chips
  rtw89: add chip_info::{h2c,c2h}_reg to support more chips
  rtw89: add hci_func_en_addr to support variant generation
  rtw89: add power_{on/off}_func
  rtw89: read chip version depends on chip ID
  rtw89: pci: use a struct to describe all registers address related to DMA channel
  rtw89: pci: add V1 of PCI channel address
  rtw89: pci: add struct rtw89_pci_info
  rtw89: 8852c: add 8852c empty files
  MAINTAINERS: add devicetree bindings entry for mt76
  ...

====================

Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac80211: Add support to trigger sta disconnect on hardware restart 2022-03-11T10:59:19+00:00 Youghandhar Chintala youghand@codeaurora.org 2022-03-08T11:53:24+00:00 7d352ccf1e9935b5222ca84e8baeb07a0c8f94b9 Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted. Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware. This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer. The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient. Tested on ath10k using WCN3990, QCA6174 Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware

In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.

Tested on ath10k using WCN3990, QCA6174

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: fix potential double free on mesh join 2022-03-11T10:51:18+00:00 Linus Lüssing ll@simonwunderlich.de 2022-03-10T18:35:13+00:00 4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. Cc: stable@vger.kernel.org Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:

  ieee80211_leave_mesh()
  -> kfree(sdata->u.mesh.ie);
  ...
  ieee80211_join_mesh()
  -> copy_mesh_setup()
     -> old_ie = ifmsh->ie;
     -> kfree(old_ie);

This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:

  $ iw dev mesh0 mesh leave
  $ iw dev mesh0 mesh join my-mesh

Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.

The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.

Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.

Cc: stable@vger.kernel.org
Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime 2022-03-11T10:45:36+00:00 MeiChia Chiu MeiChia.Chiu@mediatek.com 2022-03-08T02:16:45+00:00 022143d0c52b6e63d49ffc3542dc9d3ae15a5178 There are no legacy rates on 60GHz or sub-1GHz band, so modify the check. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com [Ghz -> GHz] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com
[Ghz ->  GHz]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible 2022-03-11T10:42:49+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2022-02-20T08:23:15+00:00 60df54f8e6bb2c375a9d21f16c9d3983206709e7 Previous memory allocations in this function already use GFP_KERNEL, so use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Previous memory allocations in this function already use GFP_KERNEL, so
use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit
GFP_ATOMIC.

This gives more opportunities of successful allocation.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>