linux-toradex.git/net/netlabel/netlabel_calipso.c, branch v5.1

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:01:08+00:00

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland 
Signed-off-by: Paul E. McKenney 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar

genetlink: mark families as __ro_after_init

2016-10-27T20:16:09+00:00

Now genl_register_family() is the only thing (other than the
users themselves, perhaps, but I didn't find any doing that)
writing to the family struct.

In all families that I found, genl_register_family() is only
called from __init functions (some indirectly, in which case
I've add __init annotations to clarifly things), so all can
actually be marked __ro_after_init.

This protects the data structure from accidental corruption.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

genetlink: statically initialize families

2016-10-27T20:16:09+00:00

Instead of providing macros/inline functions to initialize
the families, make all users initialize them statically and
get rid of the macros.

This reduces the kernel code size by about 1.6k on x86-64
(with allyesconfig).

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

genetlink: no longer support using static family IDs

2016-10-27T20:16:09+00:00

Static family IDs have never really been used, the only
use case was the workaround I introduced for those users
that assumed their family ID was also their multicast
group ID.

Additionally, because static family IDs would never be
reserved by the generic netlink code, using a relatively
low ID would only work for built-in families that can be
registered immediately after generic netlink is started,
which is basically only the control family (apart from
the workaround code, which I also had to add code for so
it would reserve those IDs)

Thus, anything other than GENL_ID_GENERATE is flawed and
luckily not used except in the cases I mentioned. Move
those workarounds into a few lines of code, and then get
rid of GENL_ID_GENERATE entirely, making it more robust.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

calipso: Add a label cache.

2016-06-27T19:06:17+00:00

This works in exactly the same way as the CIPSO label cache.
The idea is to allow the lsm to cache the result of a secattr
lookup so that it doesn't need to perform the lookup for
every skbuff.

It introduces two sysctl controls:
 calipso_cache_enable - enables/disables the cache.
 calipso_cache_bucket_size - sets the size of a cache bucket.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

calipso: Allow the lsm to label the skbuff directly.

2016-06-27T19:06:15+00:00

In some cases, the lsm needs to add the label to the skbuff directly.
A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4
behaviour.  This allows selinux to label the skbuffs that it requires.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

calipso: Allow request sockets to be relabelled by the lsm.

2016-06-27T19:05:29+00:00

Request sockets need to have a label that takes into account the
incoming connection as well as their parent's label.  This is used
for the outgoing SYN-ACK and for their child full-socket.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

calipso: Set the calipso socket label to match the secattr.

2016-06-27T19:02:51+00:00

CALIPSO is a hop-by-hop IPv6 option.  A lot of this patch is based on
the equivalent CISPO code.  The main difference is due to manipulating
the options in the hop-by-hop header.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

netlabel: Add support for removing a CALIPSO DOI.

2016-06-27T19:02:49+00:00

Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command.
It requires the attribute:
 NLBL_CALIPSO_A_DOI.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

netlabel: Add support for enumerating the CALIPSO DOI list.

2016-06-27T19:02:48+00:00

Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command.
It takes no attributes.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore