linux-toradex.git/net/openvswitch, branch v4.4.23

vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices

2016-06-24T17:18:18+00:00

[ Upstream commit 7e059158d57b79159eaf1f504825d19866ef2c42 ]

Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
transmit vxlan packets of any size, constrained only by the ability to
send out the resulting packets.  4.3 introduced netdevs corresponding
to tunnel vports.  These netdevs have an MTU, which limits the size of
a packet that can be successfully encapsulated.  The default MTU
values are low (1500 or less), which is awkwardly small in the context
of physical networks supporting jumbo frames, and leads to a
conspicuous change in behaviour for userspace.

Instead, set the MTU on openvswitch-created netdevs to be the relevant
maximum (i.e. the maximum IP packet size minus any relevant overhead),
effectively restoring the behaviour prior to 4.3.

Signed-off-by: David Wragg 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: use flow protocol when recalculating ipv6 checksums

2016-05-19T00:06:36+00:00

[ Upstream commit b4f70527f052b0c00be4d7cac562baa75b212df5 ]

When using masked actions the ipv6_proto field of an action
to set IPv6 fields may be zero rather than the prevailing protocol
which will result in skipping checksum recalculation.

This patch resolves the problem by relying on the protocol
in the flow key rather than that in the set field action.

Fixes: 83d2b9ba1abc ("net: openvswitch: Support masked set actions.")
Cc: Jarno Rajahalme 
Signed-off-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: use skb_postpush_rcsum instead of own implementations

2016-05-19T00:06:36+00:00

[ Upstream commit 6b83d28a55a891a9d70fc61ccb1c138e47dcbe74 ]

Replace individual implementations with the recently introduced
skb_postpush_rcsum() helper.

Signed-off-by: Daniel Borkmann 
Acked-by: Tom Herbert 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

lwt: fix rx checksum setting for lwt devices tunneling over ipv6

2016-03-03T23:07:04+00:00

[ Upstream commit c868ee7063bdb53f3ef9eac7bcec84960980b471 ]

the commit 35e2d1152b22 ("tunnels: Allow IPv6 UDP checksums to be
correctly controlled.") changed the default xmit checksum setting
for lwt vxlan/geneve ipv6 tunnels, so that now the checksum is not
set into external UDP header.
This commit changes the rx checksum setting for both lwt vxlan/geneve
devices created by openvswitch accordingly, so that lwt over ipv6
tunnel pairs are again able to communicate with default values.

Signed-off-by: Paolo Abeni 
Acked-by: Jiri Benc 
Acked-by: Jesse Gross 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: preserve IP control block during GSO segmentation

2016-01-31T19:29:00+00:00

[ Upstream commit 9207f9d45b0ad071baa128e846d7e7ed85016df3 ]

Skb_gso_segment() uses skb control block during segmentation.
This patch adds 32-bytes room for previous control block which
will be copied into all resulting segments.

This patch fixes kernel crash during fragmenting forwarded packets.
Fragmentation requires valid IP CB in skb for clearing ip options.
Also patch removes custom save/restore in ovs code, now it's redundant.

Signed-off-by: Konstantin Khlebnikov 
Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

openvswitch: Fix template leak in error cases.

2015-12-29T20:27:52+00:00

Commit 5b48bb8506c5 ("openvswitch: Fix helper reference leak") fixed a
reference leak on helper objects, but inadvertently introduced a leak on
the ct template.

Previously, ct_info.ct->general.use was initialized to 0 by
nf_ct_tmpl_alloc() and only incremented when ovs_ct_copy_action()
returned successful. If an error occurred while adding the helper or
adding the action to the actions buffer, the __ovs_ct_free_action()
cleanup would use nf_ct_put() to free the entry; However, this relies on
atomic_dec_and_test(ct_info.ct->general.use). This reference must be
incremented first, or nf_ct_put() will never free it.

Fix the issue by acquiring a reference to the template immediately after
allocation.

Fixes: cae3a2627520 ("openvswitch: Allow attaching helpers to ct action")
Fixes: 5b48bb8506c5 ("openvswitch: Fix helper reference leak")
Signed-off-by: Joe Stringer 
Signed-off-by: David S. Miller

openvswitch: correct encoding of set tunnel action attributes

2015-12-18T21:35:35+00:00

In a set action tunnel attributes should be encoded in a
nested action.

I noticed this because ovs-dpctl was reporting an error
when dumping flows due to the incorrect encoding of tunnel attributes
in a set action.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Signed-off-by: Simon Horman 
Signed-off-by: David S. Miller

openvswitch: Respect conntrack zone even if invalid

2015-12-12T04:31:31+00:00

If userspace executes ct(zone=1), and the connection tracker determines
that the packet is invalid, then the ct_zone flow key field is populated
with the default zone rather than the zone that was specified. Even
though connection tracking failed, this field should be updated with the
value that the action specified. Fix the issue.

Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Signed-off-by: Joe Stringer 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

openvswitch: Fix helper reference leak

2015-12-12T04:31:31+00:00

If the actions (re)allocation fails, or the actions list is larger than the
maximum size, and the conntrack action is the last action when these
problems are hit, then references to helper modules may be leaked. Fix
the issue.

Fixes: cae3a2627520 ("openvswitch: Allow attaching helpers to ct action")
Signed-off-by: Joe Stringer 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller

openvswitch: fix hangup on vxlan/gre/geneve device deletion

2015-12-03T19:29:25+00:00

Each openvswitch tunnel vport (vxlan,gre,geneve) holds a reference
to the underlying tunnel device, but never released it when such
device is deleted.
Deleting the underlying device via the ip tool cause the kernel to
hangup in the netdev_wait_allrefs() loop.
This commit ensure that on device unregistration dp_detach_port_notify()
is called for all vports that hold the device reference, properly
releasing it.

Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device")
Fixes: b2acd1dc3949 ("openvswitch: Use regular GRE net_device instead of vport")
Fixes: 6b001e682e90 ("openvswitch: Use Geneve device.")
Signed-off-by: Paolo Abeni 
Acked-by: Flavio Leitner 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller