linux-toradex.git/net/packet/internal.h, branch v5.3.2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-28T04:06:39+00:00

The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.

In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.

The aquantia driver conflicts were simple overlapping changes.

Signed-off-by: David S. Miller

af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET

2019-06-27T02:38:29+00:00

When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
	Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
	Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

	Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
	Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

	Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
	Clean up some extra newlines (Willem de Bruijn)

Reviewed-by: Willem de Bruijn 
Signed-off-by: Neil Horman 
Reported-by: Matteo Croce 
Signed-off-by: David S. Miller

net/packet: make tp_drops atomic

2019-06-15T01:52:14+00:00

Under DDOS, we want to be able to increment tp_drops without
touching the spinlock. This will help readers to drain
the receive queue slightly faster :/

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

Revert "packet: switch kvzalloc to allocate memory"

2018-09-01T06:00:28+00:00

This reverts commit 71e41286203c017d24f041a7cd71abea7ca7b1e0.

mmap()/munmap() can not be backed by kmalloced pages :

We fault in :

    VM_BUG_ON_PAGE(PageSlab(page), page);

    unmap_single_vma+0x8a/0x110
    unmap_vmas+0x4b/0x90
    unmap_region+0xc9/0x140
    do_munmap+0x274/0x360
    vm_munmap+0x81/0xc0
    SyS_munmap+0x2b/0x40
    do_syscall_64+0x13e/0x1c0
    entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 71e41286203c ("packet: switch kvzalloc to allocate memory")
Signed-off-by: Eric Dumazet 
Reported-by: John Sperbeck 
Bisected-by: John Sperbeck 
Cc: Zhang Yu 
Cc: Li RongQing 
Signed-off-by: David S. Miller

packet: switch kvzalloc to allocate memory

2018-08-13T16:21:05+00:00

The patches includes following change:

*Use modern kvzalloc()/kvfree() instead of custom allocations.

*Remove order argument for alloc_pg_vec, it can get from req.

*Remove order argument for free_pg_vec, free_pg_vec now uses
kvfree which does not need order argument.

*Remove pg_vec_order from struct packet_ring_buffer, no longer
need to save/restore 'order'

*Remove variable 'order' for packet_set_ring, it is now unused

Signed-off-by: Zhang Yu 
Signed-off-by: Li RongQing 
Signed-off-by: David S. Miller

packet: fix bitfield update race

2018-04-24T17:17:08+00:00

Updates to the bitfields in struct packet_sock are not atomic.
Serialize these read-modify-write cycles.

Move po->running into a separate variable. Its writes are protected by
po->bind_lock (except for one startup case at packet_create). Also
replace a textual precondition warning with lockdep annotation.

All others are set only in packet_setsockopt. Serialize these
updates by holding the socket lock. Analogous to other field updates,
also hold the lock when testing whether a ring is active (pg_vec).

Fixes: 8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Reported-by: DaeRyong Jeong 
Reported-by: Byoungyoung Lee 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller

packet: fix crash in fanout_demux_rollover()

2017-11-28T16:13:30+00:00

syzkaller found a race condition fanout_demux_rollover() while removing
a packet socket from a fanout group.

po->rollover is read and operated on during packet_rcv_fanout(), via
fanout_demux_rollover(), but the pointer is currently cleared before the
synchronization in packet_release().   It is safer to delay the cleanup
until after synchronize_net() has been called, ensuring all calls to
packet_rcv_fanout() for this socket have finished.

To further simplify synchronization around the rollover structure, set
po->rollover in fanout_add() only if there are no errors.  This removes
the need for rcu in the struct and in the call to
packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...).

Crashing stack trace:
 fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392
 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487
 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953
 xmit_one net/core/dev.c:2975 [inline]
 dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995
 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509
 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146
 NF_HOOK_COND include/linux/netfilter.h:239 [inline]
 ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163
 dst_output include/net/dst.h:459 [inline]
 NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250
 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660
 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072
 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline]
 ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079
 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039
 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971
 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113
 worker_thread+0x223/0x1990 kernel/workqueue.c:2247
 kthread+0x35e/0x430 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432

Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state")
Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()")
Reported-by: syzbot 
Signed-off-by: Mike Maloney 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

net: convert packet_fanout.sk_ref from atomic_t to refcount_t

2017-07-01T14:39:09+00:00

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova 
Signed-off-by: Hans Liljestrand 
Signed-off-by: Kees Cook 
Signed-off-by: David Windsor 
Signed-off-by: David S. Miller

packet: add classic BPF fanout mode

2015-08-17T21:22:47+00:00

Add fanout mode PACKET_FANOUT_CBPF that accepts a classic BPF program
to select a socket.

This avoids having to keep adding special case fanout modes. One
example use case is application layer load balancing. The QUIC
protocol, for instance, encodes a connection ID in UDP payload.

Also add socket option SOL_PACKET/PACKET_FANOUT_DATA that updates data
associated with the socket group. Fanout mode PACKET_FANOUT_CBPF is the
only user so far.

Signed-off-by: Willem de Bruijn 
Acked-by: Alexei Starovoitov 
Acked-by: Daniel Borkmann 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller