linux-toradex.git/net/rxrpc/ar-recvmsg.c, branch v4.4.85

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-03-20T22:51:09+00:00

Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	net/core/sysctl_net_core.c
	net/ipv4/inet_diag.c

The be_main.c conflict resolution was really tricky.  The conflict
hunks generated by GIT were very unhelpful, to say the least.  It
split functions in half and moved them around, when the real actual
conflict only existed solely inside of one function, that being
be_map_pci_bars().

So instead, to resolve this, I checked out be_main.c from the top
of net-next, then I applied the be_main.c changes from 'net' since
the last time I merged.  And this worked beautifully.

The inet_diag.c and sysctl_net_core.c conflicts were simple
overlapping changes, and were easily to resolve.

Signed-off-by: David S. Miller

rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()

2015-03-16T02:20:09+00:00

[I would really like an ACK on that one from dhowells; it appears to be
quite straightforward, but...]

MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of
fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit
in there.  It gets passed via flags; in fact, another such check in the same
function is done correctly - as flags & MSG_PEEK.

It had been that way (effectively disabled) for 8 years, though, so the patch
needs beating up - that case had never been tested.  If it is correct, it's
-stable fodder.

Signed-off-by: Al Viro 
Signed-off-by: David S. Miller

net: Remove iocb argument from sendmsg and recvmsg

2015-03-02T18:06:31+00:00

After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig 
Suggested-by: Al Viro 
Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller

net: rxrpc: change call to sock_recv_ts_and_drops() on rxrpc recvmsg to sock_recv_timestamp()

2015-03-02T05:19:29+00:00

Commit 3b885787ea4112 ("net: Generalize socket rx gap / receive queue overflow cmsg")
allowed receiving packet dropcount information as a socket level option.
RXRPC sockets recvmsg function was changed to support this by calling
sock_recv_ts_and_drops() instead of sock_recv_timestamp().

However, protocol families wishing to receive dropcount should call
sock_queue_rcv_skb() or set the dropcount specifically (as done
in packet_rcv()). This was not done for rxrpc and thus this feature
never worked on these sockets.

Formalizing this by not calling sock_recv_ts_and_drops() in rxrpc as
part of an effort to move skb->dropcount into skb->cb[]

Signed-off-by: Eyal Birger 
Signed-off-by: David S. Miller

net: Add and use skb_copy_datagram_msg() helper.

2014-11-05T21:46:40+00:00

This encapsulates all of the skb_copy_datagram_iovec() callers
with call argument signature "skb, offset, msghdr->msg_iov, length".

When we move to iov_iters in the networking, the iov_iter object will
sit in the msghdr.

Having a helper like this means there will be less places to touch
during that transformation.

Based upon descriptions and patch from Al Viro.

Signed-off-by: David S. Miller

af_rxrpc: Remove incorrect checksum calculation from rxrpc_recvmsg()

2014-02-07T18:58:43+00:00

The UDP checksum was already verified in rxrpc_data_ready() - which calls
skb_checksum_complete() - as the RxRPC packet header contains no checksum of
its own.  Subsequent calls to skb_copy_and_csum_datagram_iovec() are thus
redundant and are, in any case, being passed only a subset of the UDP payload -
so the checksum will always fail if that path is taken.

So there is no need to check skb->ip_summed in rxrpc_recvmsg(), and no need for
the csum_copy_error: exit path.

Signed-off-by: Tim Smith 
Signed-off-by: David Howells

af_rxrpc: Handle frames delivered from another VM

2014-01-26T11:45:04+00:00

On input, CHECKSUM_PARTIAL should be treated the same way as
CHECKSUM_UNNECESSARY. See include/linux/skbuff.h

Signed-off-by: Tim Smith 
Signed-off-by: David Howells

af_rxrpc: Avoid setting up double-free on checksum error

2014-01-26T11:45:04+00:00

skb_kill_datagram() does not dequeue the skb when MSG_PEEK is unset.
This leaves a free'd skb on the queue, resulting a double-free later.

Without this, the following oops can occur:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [] skb_dequeue+0x47/0x70
PGD 0
Oops: 0002 [#1] SMP
Modules linked in: af_rxrpc ...
CPU: 0 PID: 1191 Comm: listen Not tainted 3.12.0+ #4
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8801183536b0 ti: ffff880035c92000 task.ti: ffff880035c92000
RIP: 0010:[] skb_dequeue+0x47/0x70
RSP: 0018:ffff880035c93db8  EFLAGS: 00010097
RAX: 0000000000000246 RBX: ffff8800d2754b00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8800d254c084
RBP: ffff880035c93dd0 R08: ffff880035c93cf0 R09: ffff8800d968f270
R10: 0000000000000000 R11: 0000000000000293 R12: ffff8800d254c070
R13: ffff8800d254c084 R14: ffff8800cd861240 R15: ffff880119b39720
FS:  00007f37a969d740(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 00000000d4413000 CR4: 00000000000006f0
Stack:
 ffff8800d254c000 ffff8800d254c070 ffff8800d254c2c0 ffff880035c93df8
 ffffffffa041a5b8 ffff8800cd844c80 ffffffffa04385a0 ffff8800cd844cb0
 ffff880035c93e18 ffffffff81546cef ffff8800d45fea00 0000000000000008
Call Trace:
 [] rxrpc_release+0x128/0x2e0 [af_rxrpc]
 [] sock_release+0x1f/0x80
 [] sock_close+0x12/0x20
 [] __fput+0xe1/0x230
 [] ____fput+0xe/0x10
 [] task_work_run+0xbc/0xe0
 [] do_exit+0x2be/0xa10
 [] ? do_munmap+0x297/0x3b0
 [] do_group_exit+0x3f/0xa0
 [] SyS_exit_group+0x14/0x20
 [] system_call_fastpath+0x16/0x1b


Signed-off-by: Tim Smith 
Signed-off-by: David Howells

net: rework recvmsg handler msg_name and msg_namelen logic

2013-11-21T02:52:30+00:00

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller 
Suggested-by: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules

2011-10-31T23:30:30+00:00

These files are non modular, but need to export symbols using
the macros now living in export.h -- call out the include so
that things won't break when we remove the implicit presence
of module.h from everywhere.

Signed-off-by: Paul Gortmaker