linux-toradex.git/net/rxrpc/call_event.c, branch v5.3.2

rxrpc: Use the tx-phase skb flag to simplify tracing

2019-08-27T09:04:18+00:00

Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit.  Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.

We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.

Signed-off-by: David Howells

rxrpc: Don't bother generating maxSkew in the ACK packet

2019-08-09T14:24:00+00:00

Don't bother generating maxSkew in the ACK packet as it has been obsolete
since AFS 3.1.

Signed-off-by: David Howells 
Reviewed-by: Jeffrey Altman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix lockup due to no error backoff after ack transmit error

2018-11-03T06:59:26+00:00

If the network becomes (partially) unavailable, say by disabling IPv6, the
background ACK transmission routine can get itself into a tizzy by
proposing immediate ACK retransmission.  Since we're in the call event
processor, that happens immediately without returning to the workqueue
manager.

The condition should clear after a while when either the network comes back
or the call times out.

Fix this by:

 (1) When re-proposing an ACK on failed Tx, don't schedule it immediately.
     This will allow a certain amount of time to elapse before we try
     again.

 (2) Enforce a return to the workqueue manager after a certain number of
     iterations of the call processing loop.

 (3) Add a backoff delay that increases the delay on deferred ACKs by a
     jiffy per failed transmission to a limit of HZ.  The backoff delay is
     cleared on a successful return from kernel_sendmsg().

 (4) Cancel calls immediately if the opening sendmsg fails.  The layer
     above can arrange retransmission or rotate to another server.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: remove redundant variables 'sp' and 'did_discard'

2018-08-01T12:28:23+00:00

Variables 'sp' and 'did_discard' are being assigned,
but are never used, hence they are redundant and can be removed.

fix following warning:

net/rxrpc/call_event.c:165:25: warning: variable 'sp' set but not used [-Wunused-but-set-variable]
net/rxrpc/conn_client.c:1054:7: warning: variable 'did_discard' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing 
Signed-off-by: David Howells

rxrpc: Fix handling of call quietly cancelled out on server

2018-06-04T20:06:26+00:00

Sometimes an in-progress call will stop responding on the fileserver when
the fileserver quietly cancels the call with an internally marked abort
(RX_CALL_DEAD), without sending an ABORT to the client.

This causes the client's call to eventually expire from lack of incoming
packets directed its way, which currently leads to it being cancelled
locally with ETIME.  Note that it's not currently clear as to why this
happens as it's really hard to reproduce.

The rotation policy implement by kAFS, however, doesn't differentiate
between ETIME meaning we didn't get any response from the server and ETIME
meaning the call got cancelled mid-flow.  The latter leads to an oops when
fetching data as the rotation partially resets the afs_read descriptor,
which can result in a cleared page pointer being dereferenced because that
page has already been filled.

Handle this by the following means:

 (1) Set a flag on a call when we receive a packet for it.

 (2) Store the highest packet serial number so far received for a call
     (bearing in mind this may wrap).

 (3) If, when the "not received anything recently" timeout expires on a
     call, we've received at least one packet for a call and the connection
     as a whole has received packets more recently than that call, then
     cancel the call locally with ECONNRESET rather than ETIME.

     This indicates that the call was definitely in progress on the server.

 (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME,
     don't try the next server, but rather abort the call.

     This avoids the oops as we don't try to reuse the afs_read struct.
     Rather, as-yet ungotten pages will be reread at a later data.

Also:

 (5) Add an rxrpc tracepoint to log detection of the call being reset.

Without this, I occasionally see an oops like the following:

    general protection fault: 0000 [#1] SMP PTI
    ...
    RIP: 0010:_copy_to_iter+0x204/0x310
    RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206
    RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560
    RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000
    RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400
    R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958
    R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560
    FS:  00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0
    Call Trace:
     skb_copy_datagram_iter+0x14e/0x289
     rxrpc_recvmsg_data.isra.0+0x6f3/0xf68
     ? trace_buffer_unlock_commit_regs+0x4f/0x89
     rxrpc_kernel_recv_data+0x149/0x421
     afs_extract_data+0x1e0/0x798
     ? afs_wait_for_call_to_complete+0xc9/0x52e
     afs_deliver_fs_fetch_data+0x33a/0x5ab
     afs_deliver_to_call+0x1ee/0x5e0
     ? afs_wait_for_call_to_complete+0xc9/0x52e
     afs_wait_for_call_to_complete+0x12b/0x52e
     ? wake_up_q+0x54/0x54
     afs_make_call+0x287/0x462
     ? afs_fs_fetch_data+0x3e6/0x3ed
     ? rcu_read_lock_sched_held+0x5d/0x63
     afs_fs_fetch_data+0x3e6/0x3ed
     afs_fetch_data+0xbb/0x14a
     afs_readpages+0x317/0x40d
     __do_page_cache_readahead+0x203/0x2ba
     ? ondemand_readahead+0x3a7/0x3c1
     ondemand_readahead+0x3a7/0x3c1
     generic_file_buffered_read+0x18b/0x62f
     __vfs_read+0xdb/0xfe
     vfs_read+0xb2/0x137
     ksys_read+0x50/0x8c
     do_syscall_64+0x7d/0x1a0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note the weird value in RDI which is a result of trying to kmap() a NULL
page pointer.

Signed-off-by: David Howells 
Signed-off-by: David S. Miller

rxrpc: Fix resend event time calculation

2018-03-30T20:04:44+00:00

Commit a158bdd3 ("rxrpc: Fix call timeouts") reworked the time calculation
for the next resend event.  For this calculation, "oldest" will be before
"now", so ktime_sub(oldest, now) will yield a negative value.  When passed
to nsecs_to_jiffies which expects an unsigned value, the end result will be
a very large value, and a resend event scheduled far into the future.  This
could cause calls to stall if some packets were lost.

Fix by ordering the arguments to ktime_sub correctly.

Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Signed-off-by: Marc Dionne 
Signed-off-by: David Howells

rxrpc: Fix a bit of time confusion

2018-03-30T20:04:43+00:00

The rxrpc_reduce_call_timer() function should be passed the 'current time'
in jiffies, not the current ktime time.  It's confusing in rxrpc_resend
because that has to deal with both.  Pass the correct current time in.

Note that this only affects the trace produced and not the functioning of
the code.

Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Signed-off-by: David Howells

rxrpc: Trace resend

2018-03-27T22:02:47+00:00

Add a tracepoint to trace packet resend events and to dump the Tx
annotation buffer for added illumination.

Signed-off-by: David Howells

rxrpc: Fix variable overwrite

2017-11-29T14:44:22+00:00

Values assigned to both variable resend_at and ack_at are overwritten
before they can be used.

The correct fix here is to add 'now' to the previously computed value in
resend_at and ack_at.

Addresses-Coverity-ID: 1462262
Addresses-Coverity-ID: 1462263
Addresses-Coverity-ID: 1462264
Fixes: beb8e5e4f38c ("rxrpc: Express protocol timeouts in terms of RTT")
Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: David Howells