linux-toradex.git/net/rxrpc/misc.c, branch v5.3.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36

2019-05-24T15:27:11+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public licence as published by
  the free software foundation either version 2 of the licence or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 114 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix call timeouts

2017-11-24T10:18:41+00:00

Fix the rxrpc call expiration timeouts and make them settable from
userspace.  By analogy with other rx implementations, there should be three
timeouts:

 (1) "Normal timeout"

     This is set for all calls and is triggered if we haven't received any
     packets from the peer in a while.  It is measured from the last time
     we received any packet on that call.  This is not reset by any
     connection packets (such as CHALLENGE/RESPONSE packets).

     If a service operation takes a long time, the server should generate
     PING ACKs at a duration that's substantially less than the normal
     timeout so is to keep both sides alive.  This is set at 1/6 of normal
     timeout.

 (2) "Idle timeout"

     This is set only for a service call and is triggered if we stop
     receiving the DATA packets that comprise the request data.  It is
     measured from the last time we received a DATA packet.

 (3) "Hard timeout"

     This can be set for a call and specified the maximum lifetime of that
     call.  It should not be specified by default.  Some operations (such
     as volume transfer) take a long time.

Allow userspace to set/change the timeouts on a call with sendmsg, using a
control message:

	RXRPC_SET_CALL_TIMEOUTS

The data to the message is a number of 32-bit words, not all of which need
be given:

	u32 hard_timeout;	/* sec from first packet */
	u32 idle_timeout;	/* msec from packet Rx */
	u32 normal_timeout;	/* msec from data Rx */

This can be set in combination with any other sendmsg() that affects a
call.

Signed-off-by: David Howells

rxrpc: Fix handling of enums-to-string translation in tracing

2017-01-05T10:38:33+00:00

Fix the way enum values are translated into strings in AF_RXRPC
tracepoints.  The problem with just doing a lookup in a normal flat array
of strings or chars is that external tracing infrastructure can't find it.
Rather, TRACE_DEFINE_ENUM must be used.

Also sort the enums and string tables to make it easier to keep them in
order so that a future patch to __print_symbolic() can be optimised to try
a direct lookup into the table first before iterating over it.

A couple of _proto() macro calls are removed because they refered to tables
that got moved to the tracing infrastructure.  The relevant data can be
found by way of tracing.

Signed-off-by: David Howells

rxrpc: Need to produce an ACK for service op if op takes a long time

2016-10-06T07:11:50+00:00

We need to generate a DELAY ACK from the service end of an operation if we
start doing the actual operation work and it takes longer than expected.
This will hard-ACK the request data and allow the client to release its
resources.

To make this work:

 (1) We have to set the ack timer and propose an ACK when the call moves to
     the RXRPC_CALL_SERVER_ACK_REQUEST and clear the pending ACK and cancel
     the timer when we start transmitting the reply (the first DATA packet
     of the reply implicitly ACKs the request phase).

 (2) It must be possible to set the timer when the caller is holding
     call->state_lock, so split the lock-getting part of the timer function
     out.

 (3) Add trace notes for the ACK we're requesting and the timer we clear.

Signed-off-by: David Howells

rxrpc: Fix loss of PING RESPONSE ACK production due to PING ACKs

2016-10-06T07:11:49+00:00

Separate the output of PING ACKs from the output of other sorts of ACK so
that if we receive a PING ACK and schedule transmission of a PING RESPONSE
ACK, the response doesn't get cancelled by a PING ACK we happen to be
scheduling transmission of at the same time.

If a PING RESPONSE gets lost, the other side might just sit there waiting
for it and refuse to proceed otherwise.

Signed-off-by: David Howells

rxrpc: Fix duplicate const

2016-10-06T07:11:48+00:00

Remove a duplicate const keyword.

Signed-off-by: David Howells

rxrpc: Keep the call timeouts as ktimes rather than jiffies

2016-09-30T13:40:11+00:00

Keep that call timeouts as ktimes rather than jiffies so that they can be
expressed as functions of RTT.

Signed-off-by: David Howells

rxrpc: Make Tx loss-injection go through normal return and adjust tracing

2016-09-29T21:37:15+00:00

In rxrpc_send_data_packet() make the loss-injection path return through the
same code as the transmission path so that the RTT determination is
initiated and any future timer shuffling will be done, despite the packet
having been binned.

Whilst we're at it:

 (1) Add to the tx_data tracepoint an indication of whether or not we're
     retransmitting a data packet.

 (2) When we're deciding whether or not to request an ACK, rather than
     checking if we're in fast-retransmit mode check instead if we're
     retransmitting.

 (3) Don't invoke the lose_skb tracepoint when losing a Tx packet as we're
     not altering the sk_buff refcount nor are we just seeing it after
     getting it off the Tx list.

 (4) The rxrpc_skb_tx_lost note is then no longer used so remove it.

 (5) rxrpc_lose_skb() no longer needs to deal with rxrpc_skb_tx_lost.

Signed-off-by: David Howells

rxrpc: Implement slow-start

2016-09-24T22:49:46+00:00

Implement RxRPC slow-start, which is similar to RFC 5681 for TCP.  A
tracepoint is added to log the state of the congestion management algorithm
and the decisions it makes.

Notes:

 (1) Since we send fixed-size DATA packets (apart from the final packet in
     each phase), counters and calculations are in terms of packets rather
     than bytes.

 (2) The ACK packet carries the equivalent of TCP SACK.

 (3) The FLIGHT_SIZE calculation in RFC 5681 doesn't seem particularly
     suited to SACK of a small number of packets.  It seems that, almost
     inevitably, by the time three 'duplicate' ACKs have been seen, we have
     narrowed the loss down to one or two missing packets, and the
     FLIGHT_SIZE calculation ends up as 2.

 (4) In rxrpc_resend(), if there was no data that apparently needed
     retransmission, we transmit a PING ACK to ask the peer to tell us what
     its Rx window state is.

Signed-off-by: David Howells

rxrpc: Schedule an ACK if the reply to a client call appears overdue

2016-09-24T22:49:46+00:00

If we've sent all the request data in a client call but haven't seen any
sign of the reply data yet, schedule an ACK to be sent to the server to
find out if the reply data got lost.

If the server hasn't yet hard-ACK'd the request data, we send a PING ACK to
demand a response to find out whether we need to retransmit.

If the server says it has received all of the data, we send an IDLE ACK to
tell the server that we haven't received anything in the receive phase as
yet.

To make this work, a non-immediate PING ACK must carry a delay.  I've chosen
the same as the IDLE ACK for the moment.

Signed-off-by: David Howells