linux-toradex.git/net/rxrpc, branch v4.4.78

rxrpc: Fix several cases where a padded len isn't checked in ticket decode

2017-06-29T10:48:52+00:00

commit 5f2f97656ada8d811d3c1bef503ced266fcd53a0 upstream.

This fixes CVE-2017-7482.

When a kerberos 5 ticket is being decoded so that it can be loaded into an
rxrpc-type key, there are several places in which the length of a
variable-length field is checked to make sure that it's not going to
overrun the available data - but the data is padded to the nearest
four-byte boundary and the code doesn't check for this extra.  This could
lead to the size-remaining variable wrapping and the data pointer going
over the end of the buffer.

Fix this by making the various variable-length data checks use the padded
length.

Reported-by: 石磊 
Signed-off-by: David Howells 
Reviewed-by: Marc Dionne 
Reviewed-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA

2015-12-01T20:45:05+00:00

This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

rxrpc: Correctly handle ack at end of client call transmit phase

2015-11-24T22:14:50+00:00

Normally, the transmit phase of a client call is implicitly ack'd by the
reception of the first data packet of the response being received.
However, if a security negotiation happens, the transmit phase, if it is
entirely contained in a single packet, may get an ack packet in response
and then may get aborted due to security negotiation failure.

Because the client has shifted state to RXRPC_CALL_CLIENT_AWAIT_REPLY due
to having transmitted all the data, the code that handles processing of the
received ack packet doesn't note the hard ack the data packet.

The following abort packet in the case of security negotiation failure then
incurs an assertion failure when it tries to drain the Tx queue because the
hard ack state is out of sync (hard ack means the packets have been
processed and can be discarded by the sender; a soft ack means that the
packets are received but could still be discarded and rerequested by the
receiver).

To fix this, we should record the hard ack we received for the ack packet.

The assertion failure looks like:

	RxRPC: Assertion failed
	1 <= 0 is false
	0x1 <= 0x0 is false
	------------[ cut here ]------------
	kernel BUG at ../net/rxrpc/ar-ack.c:431!
	...
	RIP: 0010:[]  [] rxrpc_rotate_tx_window+0xbc/0x131 [af_rxrpc]
	...

Signed-off-by: David Howells 
Signed-off-by: David S. Miller

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

2015-11-07T01:50:42+00:00

__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman 
Acked-by: Vlastimil Babka 
Acked-by: Michal Hocko 
Acked-by: Johannes Weiner 
Cc: Christoph Lameter 
Cc: David Rientjes 
Cc: Vitaly Wool 
Cc: Rik van Riel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2015-11-05T23:32:38+00:00

Pull security subsystem update from James Morris:
 "This is mostly maintenance updates across the subsystem, with a
  notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
  maintainer of that"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
  apparmor: clarify CRYPTO dependency
  selinux: Use a kmem_cache for allocation struct file_security_struct
  selinux: ioctl_has_perm should be static
  selinux: use sprintf return value
  selinux: use kstrdup() in security_get_bools()
  selinux: use kmemdup in security_sid_to_context_core()
  selinux: remove pointless cast in selinux_inode_setsecurity()
  selinux: introduce security_context_str_to_sid
  selinux: do not check open perm on ftruncate call
  selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
  KEYS: Merge the type-specific data with the payload data
  KEYS: Provide a script to extract a module signature
  KEYS: Provide a script to extract the sys cert list from a vmlinux file
  keys: Be more consistent in selection of union members used
  certs: add .gitignore to stop git nagging about x509_certificate_list
  KEYS: use kvfree() in add_key
  Smack: limited capability for changing process label
  TPM: remove unnecessary little endian conversion
  vTPM: support little endian guests
  char: Drop owner assignment from i2c_driver
  ...

KEYS: Merge the type-specific data with the payload data

2015-10-21T14:18:36+00:00

Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.

Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.

Signed-off-by: David Howells 
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net

rxrpc: Replace get_seconds with ktime_get_seconds

2015-09-21T04:53:56+00:00

Replace time_t type and get_seconds function which are not y2038 safe
on 32-bit systems. Function ktime_get_seconds use monotonic instead of
real time and therefore will not cause overflow.

Signed-off-by: Ksenija Stanojevic 
Reviewed-by: Arnd Bergmann 
Signed-off-by: David S. Miller

net: Pass kern from net_proto_family.create to sk_alloc

2015-05-11T14:50:17+00:00

In preparation for changing how struct net is refcounted
on kernel sockets pass the knowledge that we are creating
a kernel socket from sock_create_kern through to sk_alloc.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: David S. Miller

net: Add a struct net parameter to sock_create_kern

2015-05-11T14:50:17+00:00

This is long overdue, and is part of cleaning up how we allocate kernel
sockets that don't reference count struct net.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: David S. Miller

new helper: msg_data_left()

2015-04-11T19:53:35+00:00

convert open-coded instances

Signed-off-by: Al Viro