linux-toradex.git/net/sunrpc/auth.c, branch v3.10.94

SUNRPC: Don't recognize RPC_AUTH_MAXFLAVOR

2013-04-04T21:01:00+00:00

RPC_AUTH_MAXFLAVOR is an invalid flavor, on purpose.  Don't allow
any processing whatsoever if a caller passes it to rpcauth_create()
or rpcauth_get_gssinfo().

Signed-off-by: Chuck Lever 
Signed-off-by: Trond Myklebust

SUNRPC: Refactor nfsd4_do_encode_secinfo()

2013-03-29T19:43:33+00:00

Clean up.  This matches a similar API for the client side, and
keeps ULP fingers out the of the GSS mech switch.

Signed-off-by: Chuck Lever 
Acked-by: J. Bruce Fields 
Signed-off-by: Trond Myklebust

SUNRPC: Introduce rpcauth_get_pseudoflavor()

2013-03-29T19:43:07+00:00

A SECINFO reply may contain flavors whose kernel module is not
yet loaded by the client's kernel.  A new RPC client API, called
rpcauth_get_pseudoflavor(), is introduced to do proper checking
for support of a security flavor.

When this API is invoked, the RPC client now tries to load the
module for each flavor first before performing the "is this
supported?" check.  This means if a module is available on the
client, but has not been loaded yet, it will be loaded and
registered automatically when the SECINFO reply is processed.

The new API can take a full GSS tuple (OID, QoP, and service).
Previously only the OID and service were considered.

nfs_find_best_sec() is updated to verify all flavors requested in a
SECINFO reply, including AUTH_NULL and AUTH_UNIX.  Previously these
two flavors were simply assumed to be supported without consulting
the RPC client.

Note that the replaced version of nfs_find_best_sec() can return
RPC_AUTH_MAXFLAVOR if the server returns a recognized OID but an
unsupported "service" value.  nfs_find_best_sec() now returns
RPC_AUTH_UNIX in this case.

Signed-off-by: Chuck Lever 
Signed-off-by: Trond Myklebust

hlist: drop the node parameter from iterators

2013-02-28T03:10:24+00:00

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin 
Acked-by: Paul E. McKenney 
Signed-off-by: Sasha Levin 
Cc: Wu Fengguang 
Cc: Marcelo Tosatti 
Cc: Gleb Natapov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sunrpc: Hash uids by first computing their value in the initial userns

2013-02-13T14:15:23+00:00

In svcauth_unix introduce a helper unix_gid_hash as otherwise the
expresion to generate the hash value is just too long.

Cc: "J. Bruce Fields" 
Cc: Trond Myklebust 
Signed-off-by: "Eric W. Biederman"

sunrpc: Use userns friendly constants.

2013-02-13T14:15:15+00:00

Instead of (uid_t)0 use GLOBAL_ROOT_UID.
Instead of (gid_t)0 use GLOBAL_ROOT_GID.
Instead of (uid_t)-1 use INVALID_UID
Instead of (gid_t)-1 use INVALID_GID.
Instead of NOGROUP use INVALID_GID.

Cc: "J. Bruce Fields" 
Cc: Trond Myklebust 
Signed-off-by: "Eric W. Biederman"

SUNRPC: Add rpcauth_list_flavors()

2012-07-16T19:12:15+00:00

The gss_mech_list_pseudoflavors() function provides a list of
currently registered GSS pseudoflavors.  This list does not include
any non-GSS flavors that have been registered with the RPC client.
nfs4_find_root_sec() currently adds these extra flavors by hand.

Instead, nfs4_find_root_sec() should be looking at the set of flavors
that have been explicitly registered via rpcauth_register().  And,
other areas of code will soon need the same kind of list that
contains all flavors the kernel currently knows about (see below).

Rather than cloning the open-coded logic in nfs4_find_root_sec() to
those new places, introduce a generic RPC function that generates a
full list of registered auth flavors and pseudoflavors.

A new rpc_authops method is added that lists a flavor's
pseudoflavors, if it has any.  I encountered an interesting module
loader loop when I tried to get the RPC client to invoke
gss_mech_list_pseudoflavors() by name.

This patch is a pre-requisite for server trunking discovery, and a
pre-requisite for fixing up the in-kernel mount client to do better
automatic security flavor selection.

Signed-off-by: Chuck Lever 
Signed-off-by: Trond Myklebust

net: Remove unnecessary semicolons

2011-06-05T21:33:39+00:00

Semicolons are not necessary after switch/while/for/if braces
so remove them.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

vmscan: change shrinker API by passing shrink_control struct

2011-05-25T15:39:26+00:00

Change each shrinker's API by consolidating the existing parameters into
shrink_control struct.  This will simplify any further features added w/o
touching each file of shrinker.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han 
Cc: KOSAKI Motohiro 
Cc: Minchan Kim 
Acked-by: Pavel Emelyanov 
Cc: KAMEZAWA Hiroyuki 
Cc: Mel Gorman 
Acked-by: Rik van Riel 
Cc: Johannes Weiner 
Cc: Hugh Dickins 
Cc: Dave Hansen 
Cc: Steven Whitehouse 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

SUNRPC: New xdr_streams XDR decoder API

2010-12-16T17:37:25+00:00

Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere.  We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.

This is a refactoring change.  It should not cause different behavior.

Signed-off-by: Chuck Lever 
Tested-by: J. Bruce Fields 
Signed-off-by: Trond Myklebust