Pull crypto fixes from Herbert Xu:
 "This fixes an NFS regression caused by the skcipher/hash conversion in
  sunrpc.  It also fixes a build problem in certain configurations with
  bcm63xx"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: bcm63xx - fix device tree compilation
  sunrpc: Fix skcipher/shash conversion

Mostly direct substitution with occasional adjustment or removing
outdated comments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The skcpiher/shash conversion introduced a number of bugs in the
sunrpc code:

1) Missing calls to skcipher_request_set_tfm lead to crashes.
2) The allocation size of shash_desc is too small which leads to
memory corruption.

Fixes: 3b5cf20cf439 ("sunrpc: Use skcipher and ahash/shash")
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Tested-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull nfsd updates from Bruce Fields:
 "Various bugfixes, a RDMA update from Chuck Lever, and support for a
  new pnfs layout type from Christoph Hellwig.  The new layout type is a
  variant of the block layout which uses SCSI features to offer improved
  fencing and device identification.

  (Also: note this pull request also includes the client side of SCSI
  layout, with Trond's permission.)"

* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
  sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
  nfsd: recover: fix memory leak
  nfsd: fix deadlock secinfo+readdir compound
  nfsd4: resfh unused in nfsd4_secinfo
  svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
  svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
  svcrdma: Remove close_out exit path
  svcrdma: Hook up the logic to return ERR_CHUNK
  svcrdma: Use correct XID in error replies
  svcrdma: Make RDMA_ERROR messages work
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  svcrdma: svc_rdma_post_recv() should close connection on error
  svcrdma: Close connection when a send error occurs
  nfsd: Lower NFSv4.1 callback message size limit
  svcrdma: Do not send Write chunk XDR pad with inline content
  svcrdma: Do not write xdr_buf::tail in a Write chunk
  svcrdma: Find client-provided write and reply chunks once per reply
  nfsd: Update NFS server comments related to RDMA support
  nfsd: Fix a memory leak when meeting unsupported state_protect_how4
  nfsd4: fix bad bounds checking

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:
   - Add support for multiple NFSv4.1 callbacks in flight
   - Initial patchset for RPC multipath support
   - Adapt RPC/RDMA to use the new completion queue API

  Bugfixes and cleanups:
   - nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
   - Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
   - Fix RPC/RDMA credit accounting
   - Properly handle RDMA_ERROR replies
   - xprtrdma: Do not wait if ib_post_send() fails
   - xprtrdma: Segment head and tail XDR buffers on page boundaries
   - xprtrdma cleanups for dprintk, physical_op_map and unused macros"

* tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (35 commits)
  nfs/blocklayout: make sure making a aligned read request
  nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
  nfs: remove nfs_inode_dio_wait
  nfs: remove nfs4_file_fsync
  xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
  xprtrdma: Use an anonymous union in struct rpcrdma_mw
  xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
  xprtrdma: Serialize credit accounting again
  xprtrdma: Properly handle RDMA_ERROR replies
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  xprtrdma: Do not wait if ib_post_send() fails
  xprtrdma: Segment head and tail XDR buffers on page boundaries
  xprtrdma: Clean up dprintk format string containing a newline
  xprtrdma: Clean up physical_op_map()
  xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
  NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback
  pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3
  SUNRPC: Allow addition of new transports to a struct rpc_clnt
  NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections
  SUNRPC: Make NFS swap work with multipath
  ...

sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer
set.  In this case it aborts the queuing of the upcall.
However it has already taken a new counted reference on "h" and
doesn't "put" it, even though it frees the data structure holding the reference.

So let's delay the "cache_get" until we know we need it.

Fixes: f9e1aedc6c79 ("sunrpc/cache: remove races with queuing an upcall.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.6:

  API:
   - Convert remaining crypto_hash users to shash or ahash, also convert
     blkcipher/ablkcipher users to skcipher.
   - Remove crypto_hash interface.
   - Remove crypto_pcomp interface.
   - Add crypto engine for async cipher drivers.
   - Add akcipher documentation.
   - Add skcipher documentation.

  Algorithms:
   - Rename crypto/crc32 to avoid name clash with lib/crc32.
   - Fix bug in keywrap where we zero the wrong pointer.

  Drivers:
   - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
   - Add PIC32 hwrng driver.
   - Support BCM6368 in bcm63xx hwrng driver.
   - Pack structs for 32-bit compat users in qat.
   - Use crypto engine in omap-aes.
   - Add support for sama5d2x SoCs in atmel-sha.
   - Make atmel-sha available again.
   - Make sahara hashing available again.
   - Make ccp hashing available again.
   - Make sha1-mb available again.
   - Add support for multiple devices in ccp.
   - Improve DMA performance in caam.
   - Add hashing support to rockchip"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
  crypto: qat - remove redundant arbiter configuration
  crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
  crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
  crypto: qat - Change the definition of icp_qat_uof_regtype
  hwrng: exynos - use __maybe_unused to hide pm functions
  crypto: ccp - Add abstraction for device-specific calls
  crypto: ccp - CCP versioning support
  crypto: ccp - Support for multiple CCPs
  crypto: ccp - Remove check for x86 family and model
  crypto: ccp - memset request context to zero during import
  lib/mpi: use "static inline" instead of "extern inline"
  lib/mpi: avoid assembler warning
  hwrng: bcm63xx - fix non device tree compatibility
  crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
  crypto: qat - The AE id should be less than the maximal AE number
  lib/mpi: Endianness fix
  crypto: rockchip - add hash support for crypto engine in rk3288
  crypto: xts - fix compile errors
  crypto: doc - add skcipher API documentation
  crypto: doc - update AEAD AD handling
  ...

NFS: NFSoRDMA Client Side Changes

These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover.  These patches also switch xprtrdma to
use the new CQ API

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
  xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
  xprtrdma: Use an anonymous union in struct rpcrdma_mw
  xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
  xprtrdma: Serialize credit accounting again
  xprtrdma: Properly handle RDMA_ERROR replies
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  xprtrdma: Do not wait if ib_post_send() fails
  xprtrdma: Segment head and tail XDR buffers on page boundaries
  xprtrdma: Clean up dprintk format string containing a newline
  xprtrdma: Clean up physical_op_map()
  xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro

Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b2498e
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.

By converting to this new API, xprtrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.

Because each ib_cqe carries a pointer to a completion method, the
core can now post its own operations on a consumer's QP, and handle
the completions itself, without changes to the consumer.

Send completions were previously handled entirely in the completion
upcall handler (ie, deferring to a process context is unneeded).
Thus IB_POLL_SOFTIRQ is a direct replacement for the current
xprtrdma send code path.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>