Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function no longer does anything. The is only a single caller of register_sysctl_root when semantically there should be two. Remove this function so that if someone decides this functionality is needed again it will be obvious all of the callers of setup_sysctl_set need to be audited and modified appropriately. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull namespace updates from Eric Biederman:
"This set of changes is a number of smaller things that have been
overlooked in other development cycles focused on more fundamental
change. The devpts changes are small things that were a distraction
until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
trivial regression fix to autofs for the unprivileged mount changes
that went in last cycle. A pair of ioctls has been added by Andrey
Vagin making it is possible to discover the relationships between
namespaces when referring to them through file descriptors.
The big user visible change is starting to add simple resource limits
to catch programs that misbehave. With namespaces in general and user
namespaces in particular allowing users to use more kinds of
resources, it has become important to have something to limit errant
programs. Because the purpose of these limits is to catch errant
programs the code needs to be inexpensive to use as it always on, and
the default limits need to be high enough that well behaved programs
on well behaved systems don't encounter them.
To this end, after some review I have implemented per user per user
namespace limits, and use them to limit the number of namespaces. The
limits being per user mean that one user can not exhause the limits of
another user. The limits being per user namespace allow contexts where
the limit is 0 and security conscious folks can remove from their
threat anlysis the code used to manage namespaces (as they have
historically done as it root only). At the same time the limits being
per user namespace allow other parts of the system to use namespaces.
Namespaces are increasingly being used in application sand boxing
scenarios so an all or nothing disable for the entire system for the
security conscious folks makes increasing use of these sandboxes
impossible.
There is also added a limit on the maximum number of mounts present in
a single mount namespace. It is nontrivial to guess what a reasonable
system wide limit on the number of mount structure in the kernel would
be, especially as it various based on how a system is using
containers. A limit on the number of mounts in a mount namespace
however is much easier to understand and set. In most cases in
practice only about 1000 mounts are used. Given that some autofs
scenarious have the potential to be 30,000 to 50,000 mounts I have set
the default limit for the number of mounts at 100,000 which is well
above every known set of users but low enough that the mount hash
tables don't degrade unreaonsably.
These limits are a start. I expect this estabilishes a pattern that
other limits for resources that namespaces use will follow. There has
been interest in making inotify event limits per user per user
namespace as well as interest expressed in making details about what
is going on in the kernel more visible"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
autofs: Fix automounts by using current_real_cred()->uid
mnt: Add a per mount namespace limit on the number of mounts
netns: move {inc,dec}_net_namespaces into #ifdef
nsfs: Simplify __ns_get_path
tools/testing: add a test to check nsfs ioctl-s
nsfs: add ioctl to get a parent namespace
nsfs: add ioctl to get an owning user namespace for ns file descriptor
kernel: add a helper to get an owning user namespace for a namespace
devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
devpts: Remove sync_filesystems
devpts: Make devpts_kill_sb safe if fsi is NULL
devpts: Simplify devpts_mount by using mount_nodev
devpts: Move the creation of /dev/pts/ptmx into fill_super
devpts: Move parse_mount_options into fill_super
userns: When the per user per user namespace limit is reached return ENOSPC
userns; Document per user per user namespace limits.
mntns: Add a limit on the number of mount namespaces.
netns: Add a limit on the number of net namespaces
cgroupns: Add a limit on the number of cgroup namespaces
ipcns: Add a limit on the number of ipc namespaces
...
The capability check should not be audited since it is only being used
to determine the inode permissions. A failed check does not indicate a
violation of security policy but, when an LSM is enabled, a denial audit
message was being generated.
The denial audit message caused confusion for some application authors
because root-running Go applications always triggered the denial. To
prevent this confusion, the capability check in net_ctl_permissions() is
switched to the noaudit variant.
BugLink: https://launchpad.net/bugs/1465724
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
[dtor: reapplied after e79c6a4fc923 ("net: make net namespace sysctls
belong to container's owner") accidentally reverted the change.]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If net namespace is attached to a user namespace let's make container's root owner of sysctls affecting said network namespace instead of global root. This also allows us to clean up net_ctl_permissions() because we do not need to fudge permissions anymore for the container's owner since it now owns the objects in question. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Passing nsproxy into sysctl_table_root.lookup was a premature optimization in attempt to avoid depending on current. The directory /proc/self/sys has not appeared and if and when it does this code will need to be reviewed closely and reworked anyway. So remove the premature optimization. Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The capability check should not be audited since it is only being used to determine the inode permissions. A failed check does not indicate a violation of security policy but, when an LSM is enabled, a denial audit message was being generated. The denial audit message caused confusion for some application authors because root-running Go applications always triggered the denial. To prevent this confusion, the capability check in net_ctl_permissions() is switched to the noaudit variant. BugLink: https://launchpad.net/bugs/1465724 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
the returned buffer of register_sysctl() is stored into net_header variable, but net_header is not used after, and compiler maybe optimise the variable out, and lead kmemleak reported the below warning comm "swapper/0", pid 1, jiffies 4294937448 (age 267.270s) hex dump (first 32 bytes): 90 38 8b 01 c0 ff ff ff 00 00 00 00 01 00 00 00 .8.............. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffc00020f134>] create_object+0x10c/0x2a0 [<ffffffc00070ff44>] kmemleak_alloc+0x54/0xa0 [<ffffffc0001fe378>] __kmalloc+0x1f8/0x4f8 [<ffffffc00028e984>] __register_sysctl_table+0x64/0x5a0 [<ffffffc00028eef0>] register_sysctl+0x30/0x40 [<ffffffc00099c304>] net_sysctl_init+0x20/0x58 [<ffffffc000994dd8>] sock_init+0x10/0xb0 [<ffffffc0000842e0>] do_one_initcall+0x90/0x1b8 [<ffffffc000966bac>] kernel_init_freeable+0x218/0x2f0 [<ffffffc00070ed6c>] kernel_init+0x1c/0xe8 [<ffffffc000083bfc>] ret_from_fork+0xc/0x50 [<ffffffffffffffff>] 0xffffffffffffffff <<end check kmemleak>> Before fix, the objdump result on ARM64: 0000000000000000 <net_sysctl_init>: 0: a9be7bfd stp x29, x30, [sp,#-32]! 4: 90000001 adrp x1, 0 <net_sysctl_init> 8: 90000000 adrp x0, 0 <net_sysctl_init> c: 910003fd mov x29, sp 10: 91000021 add x1, x1, #0x0 14: 91000000 add x0, x0, #0x0 18: a90153f3 stp x19, x20, [sp,#16] 1c: 12800174 mov w20, #0xfffffff4 // #-12 20: 94000000 bl 0 <register_sysctl> 24: b4000120 cbz x0, 48 <net_sysctl_init+0x48> 28: 90000013 adrp x19, 0 <net_sysctl_init> 2c: 91000273 add x19, x19, #0x0 30: 9101a260 add x0, x19, #0x68 34: 94000000 bl 0 <register_pernet_subsys> 38: 2a0003f4 mov w20, w0 3c: 35000060 cbnz w0, 48 <net_sysctl_init+0x48> 40: aa1303e0 mov x0, x19 44: 94000000 bl 0 <register_sysctl_root> 48: 2a1403e0 mov w0, w20 4c: a94153f3 ldp x19, x20, [sp,#16] 50: a8c27bfd ldp x29, x30, [sp],#32 54: d65f03c0 ret After: 0000000000000000 <net_sysctl_init>: 0: a9bd7bfd stp x29, x30, [sp,#-48]! 4: 90000000 adrp x0, 0 <net_sysctl_init> 8: 910003fd mov x29, sp c: a90153f3 stp x19, x20, [sp,#16] 10: 90000013 adrp x19, 0 <net_sysctl_init> 14: 91000000 add x0, x0, #0x0 18: 91000273 add x19, x19, #0x0 1c: f90013f5 str x21, [sp,#32] 20: aa1303e1 mov x1, x19 24: 12800175 mov w21, #0xfffffff4 // #-12 28: 94000000 bl 0 <register_sysctl> 2c: f9002260 str x0, [x19,#64] 30: b40001a0 cbz x0, 64 <net_sysctl_init+0x64> 34: 90000014 adrp x20, 0 <net_sysctl_init> 38: 91000294 add x20, x20, #0x0 3c: 9101a280 add x0, x20, #0x68 40: 94000000 bl 0 <register_pernet_subsys> 44: 2a0003f5 mov w21, w0 48: 35000080 cbnz w0, 58 <net_sysctl_init+0x58> 4c: aa1403e0 mov x0, x20 50: 94000000 bl 0 <register_sysctl_root> 54: 14000004 b 64 <net_sysctl_init+0x64> 58: f9402260 ldr x0, [x19,#64] 5c: 94000000 bl 0 <unregister_sysctl_table> 60: f900227f str xzr, [x19,#64] 64: 2a1503e0 mov w0, w21 68: f94013f5 ldr x21, [sp,#32] 6c: a94153f3 ldp x19, x20, [sp,#16] 70: a8c37bfd ldp x29, x30, [sp],#48 74: d65f03c0 ret Add the possible error handle to free the net_header to remove the kmemleak warning Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of duplicate code in net_ctl_permissions and fix the comment. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>