linux-toradex.git/net/tipc/core.c, branch v3.10.2

tipc: add InfiniBand media type

2013-04-17T18:18:33+00:00

Add InfiniBand media type based on the ethernet media type.

The only real difference is that in case of InfiniBand, we need the entire
20 bytes of space reserved for media addresses, so the TIPC media type ID is
not explicitly stored in the packet payload.

Sample output of tipc-config:

# tipc-config -v -addr -netid -nt=all -p -m -b -n -ls

node address: <10.1.4>
current network id: 4711
Type       Lower      Upper      Port Identity              Publication Scope
0          167776257  167776257  <10.1.1:1855512577>        1855512578  cluster
           167776260  167776260  <10.1.4:1216454657>        1216454658  zone
1          1          1          <10.1.4:1216479235>        1216479236  node
Ports:
1216479235: bound to {1,1}
1216454657: bound to {0,167776260}
Media:
eth
ib
Bearers:
ib:ib0
Nodes known:
<10.1.1>: up
Link 
  Window:20 packets
  RX packets:0 fragments:0/0 bundles:0/0
  TX packets:0 fragments:0/0 bundles:0/0
  RX naks:0 defs:0 dups:0
  TX naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:0 avg:0

Link <10.1.4:ib0-10.1.1:ib0>
  ACTIVE  MTU:2044  Priority:10  Tolerance:1500 ms  Window:50 packets
  RX packets:80 fragments:0/0 bundles:0/0
  TX packets:40 fragments:0/0 bundles:0/0
  TX profile sample:22 packets  average:54 octets
  0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0%
  RX states:410 probes:213 naks:0 defs:0 dups:0
  TX states:410 probes:197 naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:1 avg:0

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller

tipc: delete TIPC_ADVANCED Kconfig variable

2012-11-22T19:33:29+00:00

There used to be a time when TIPC had lots of Kconfig knobs the
end user could alter, but they have all been made automatic or
obsolete, with the exception of CONFIG_TIPC_PORTS.  This
previously existing set of options was all hidden under the
TIPC_ADVANCED setting, which does not exist in any code, but
only in Kconfig scope.

Having this now, just to hide the one remaining "advanced"
option no longer makes sense.  Remove it.  Also get rid of the
ifdeffery in the TIPC code that allowed for TIPC_PORTS to be
possibly undefined.

Signed-off-by: Paul Gortmaker

tipc: eliminate configuration for maximum number of name publications

2012-08-20T09:26:31+00:00

Gets rid of the need for users to specify the maximum number of
name publications supported by TIPC. TIPC now automatically provides
support for the maximum number of name publications to 65535.

Signed-off-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

tipc: eliminate configuration for maximum number of name subscriptions

2012-08-20T09:26:31+00:00

Gets rid of the need for users to specify the maximum number of
name subscriptions supported by TIPC. TIPC now automatically provides
support for the maximum number of name subscriptions to 65535.

Signed-off-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

tipc: add __read_mostly annotations to several global variables

2012-08-20T09:26:31+00:00

Added to the following:

 - tipc_random
 - tipc_own_addr
 - tipc_max_ports
 - tipc_net_id
 - tipc_remote_management
 - handler_enabled

The above global variables are read often, but written rarely. Use
__read_mostly to prevent them being on the same cacheline as another
variable which is written to often, which would cause cacheline
bouncing.

Signed-off-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

tipc: change tipc_net_start routine return value type

2012-08-20T09:26:30+00:00

Since now tipc_net_start() always returns a success code - 0, its
return value type should be changed from integer to void, which can
avoid unnecessary check for its return value.

Signed-off-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

tipc: remove pointless name sanity check and tipc_alphabet array

2012-08-20T09:26:30+00:00

There is no real reason to check whether all letters in the given
media name and network interface name are within the character set
defined in tipc_alphabet array. Even if we eliminate the checking,
the rest of checking conditions in tipc_enable_bearer() can ensure
we do not enable an invalid or illegal bearer.

Signed-off-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

tipc: remove print_buf and deprecated log buffer code

2012-07-13T23:34:43+00:00

The internal log buffer handling functions can now safely be
removed since there is no code using it anymore.  Requests to
interact with the internal tipc log buffer over netlink (in
config.c) will report 'obsolete command'.

This represents the final removal of any references to a
struct print_buf, and the removal of the struct itself.
We also get rid of a TIPC specific Kconfig in the process.

Finally, log.h is removed since it is not needed anymore.

Signed-off-by: Erik Hugne 
Signed-off-by: Jon Maloy 
Signed-off-by: Paul Gortmaker

tipc: use standard printk shortcut macros (pr_err etc.)

2012-07-13T23:24:44+00:00

All messages should go directly to the kernel log.  The TIPC
specific error, warning, info and debug trace macro's are
removed and all references replaced with pr_err, pr_warn,
pr_info and pr_debug.

Commonly used sub-strings are explicitly declared as a const
char to reduce .text size.

Note that this means the debug messages (changed to pr_debug),
are now enabled through dynamic debugging, instead of a TIPC
specific Kconfig option (TIPC_DEBUG).  The latter will be
phased out completely

Signed-off-by: Erik Hugne 
Signed-off-by: Jon Maloy 
[PG: use pr_fmt as suggested by Joe Perches ]
Signed-off-by: Paul Gortmaker

tipc: compress out gratuitous extra carriage returns

2012-04-30T19:53:56+00:00

Some of the comment blocks are floating in limbo between two
functions, or between blocks of code.  Delete the extra line
feeds between any comment and its associated following block
of code, to be consistent with the majority of the rest of
the kernel.  Also delete trailing newlines at EOF and fix
a couple trivial typos in existing comments.

This is a 100% cosmetic change with no runtime impact.  We get
rid of over 500 lines of non-code, and being blank line deletes,
they won't even show up as noise in git blame.

Signed-off-by: Paul Gortmaker