linux-toradex.git/net/tipc/net.h, branch v5.3.2

tipc: fix lockdep warning when reinitilaizing sockets

2018-11-18T06:01:31+00:00

We get the following warning:

[   47.926140] 32-bit node address hash set to 2010a0a
[   47.927202]
[   47.927433] ================================
[   47.928050] WARNING: inconsistent lock state
[   47.928661] 4.19.0+ #37 Tainted: G            E
[   47.929346] --------------------------------
[   47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0
[   47.930116] {SOFTIRQ-ON-W} state was registered at:
[   47.930116]   _raw_spin_lock+0x29/0x60
[   47.930116]   rht_deferred_worker+0x556/0x810
[   47.930116]   process_one_work+0x1f5/0x540
[   47.930116]   worker_thread+0x64/0x3e0
[   47.930116]   kthread+0x112/0x150
[   47.930116]   ret_from_fork+0x3a/0x50
[   47.930116] irq event stamp: 14044
[   47.930116] hardirqs last  enabled at (14044): [] __local_bh_enable_ip+0x7a/0xf0
[   47.938117] hardirqs last disabled at (14043): [] __local_bh_enable_ip+0x41/0xf0
[   47.938117] softirqs last  enabled at (14028): [] irq_enter+0x5e/0x60
[   47.938117] softirqs last disabled at (14029): [] irq_exit+0xb5/0xc0
[   47.938117]
[   47.938117] other info that might help us debug this:
[   47.938117]  Possible unsafe locking scenario:
[   47.938117]
[   47.938117]        CPU0
[   47.938117]        ----
[   47.938117]   lock(&(&ht->lock)->rlock);
[   47.938117]   
[   47.938117]     lock(&(&ht->lock)->rlock);
[   47.938117]
[   47.938117]  *** DEADLOCK ***
[   47.938117]
[   47.938117] 2 locks held by swapper/3/0:
[   47.938117]  #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280
[   47.938117]  #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc]
[   47.938117]
[   47.938117] stack backtrace:
[   47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G            E     4.19.0+ #37
[   47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   47.938117] Call Trace:
[   47.938117]  
[   47.938117]  dump_stack+0x5e/0x8b
[   47.938117]  print_usage_bug+0x1ed/0x1ff
[   47.938117]  mark_lock+0x5b5/0x630
[   47.938117]  __lock_acquire+0x4c0/0x18f0
[   47.938117]  ? lock_acquire+0xa6/0x180
[   47.938117]  lock_acquire+0xa6/0x180
[   47.938117]  ? rhashtable_walk_enter+0x36/0xb0
[   47.938117]  _raw_spin_lock+0x29/0x60
[   47.938117]  ? rhashtable_walk_enter+0x36/0xb0
[   47.938117]  rhashtable_walk_enter+0x36/0xb0
[   47.938117]  tipc_sk_reinit+0xb0/0x410 [tipc]
[   47.938117]  ? mark_held_locks+0x6f/0x90
[   47.938117]  ? __local_bh_enable_ip+0x7a/0xf0
[   47.938117]  ? lockdep_hardirqs_on+0x20/0x1a0
[   47.938117]  tipc_net_finalize+0xbf/0x180 [tipc]
[   47.938117]  tipc_disc_timeout+0x509/0x540 [tipc]
[   47.938117]  ? call_timer_fn+0x5/0x280
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  call_timer_fn+0xa1/0x280
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  run_timer_softirq+0x1f2/0x4d0
[   47.938117]  __do_softirq+0xfc/0x413
[   47.938117]  irq_exit+0xb5/0xc0
[   47.938117]  smp_apic_timer_interrupt+0xac/0x210
[   47.938117]  apic_timer_interrupt+0xf/0x20
[   47.938117]  
[   47.938117] RIP: 0010:default_idle+0x1c/0x140
[   47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b
[   47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[   47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001
[   47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200
[   47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
[   47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[   47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200
[   47.938117]  ? default_idle+0x1a/0x140
[   47.938117]  do_idle+0x1bc/0x280
[   47.938117]  cpu_startup_entry+0x19/0x20
[   47.938117]  start_secondary+0x187/0x1c0
[   47.938117]  secondary_startup_64+0xa4/0xb0

The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is
calling the function rhashtable_walk_enter() within a timer interrupt.
We fix this by executing tipc_net_finalize() in work queue context.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: obtain node identity from interface by default

2018-03-23T17:12:18+00:00

Selecting and explicitly configuring a TIPC node identity may be
unwanted in some cases.

In this commit we introduce a default setting if the identity has not
been set at the moment the first bearer is enabled. We do this by
using a raw copy of a unique identifier from the used interface: MAC
address in the case of an L2 bearer, IPv4/IPv6 address in the case
of a UDP bearer.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: add 128-bit node identifier

2018-03-23T17:12:18+00:00

We add a 128-bit node identity, as an alternative to the currently used
32-bit node address.

For the sake of compatibility and to minimize message header changes
we retain the existing 32-bit address field. When not set explicitly by
the user, this field will be filled with a hash value generated from the
much longer node identity, and be used as a shorthand value for the
latter.

We permit either the address or the identity to be set by configuration,
but not both, so when the address value is set by a legacy user the
corresponding 128-bit node identity is generated based on the that value.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: Introduce __tipc_nl_net_set

2018-02-14T19:46:33+00:00

Introduce __tipc_nl_net_set() which doesn't hold RTNL lock.

Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller

tipc: add peer removal functionality

2016-08-19T06:36:07+00:00

Add TIPC_NL_PEER_REMOVE netlink command. This command can remove
an offline peer node from the internal data structures.

This will be supported by the tipc user space tool in iproute2.

Signed-off-by: Richard Alpe 
Reviewed-by: Jon Maloy 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller

tipc: make tipc node table aware of net namespace

2015-01-12T21:24:32+00:00

Global variables associated with node table are below:
- node table list (node_htable)
- node hash table list (tipc_node_list)
- node table lock (node_list_lock)
- node number counter (tipc_num_nodes)
- node link number counter (tipc_num_links)

To make node table support namespace, above global variables must be
moved to tipc_net structure in order to keep secret for different
namespaces. As a consequence, these variables are allocated and
initialized when namespace is created, and deallocated when namespace
is destroyed. After the change, functions associated with these
variables have to utilize a namespace pointer to access them. So
adding namespace pointer as a parameter of these functions is the
major change made in the commit.

Signed-off-by: Ying Xue 
Tested-by: Tero Aho 
Reviewed-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: involve namespace infrastructure

2015-01-12T21:24:32+00:00

Involve namespace infrastructure, make the "tipc_net_id" global
variable aware of per namespace, and rename it to "net_id". In
order that the conversion can be successfully done, an instance
of networking namespace must be passed to relevant functions,
allowing them to access the "net_id" variable of per namespace.

Signed-off-by: Ying Xue 
Tested-by: Tero Aho 
Reviewed-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: add net set to new netlink api

2014-11-21T20:01:31+00:00

Add TIPC_NL_NET_SET command to the new tipc netlink API.

This command can set the network id and network (tipc) address.

Netlink logical layout of network set message:
-> net
     [ -> id ]
     [ -> address ]

Signed-off-by: Richard Alpe 
Reviewed-by: Erik Hugne 
Reviewed-by: Jon Maloy 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller

tipc: add net dump to new netlink api

2014-11-21T20:01:31+00:00

Add TIPC_NL_NET_GET command to the new tipc netlink API.

This command dumps the network id of the node.

Netlink logical layout of returned network data:
-> net
    -> id

Signed-off-by: Richard Alpe 
Reviewed-by: Erik Hugne 
Reviewed-by: Jon Maloy 
Acked-by: Ying Xue 
Signed-off-by: David S. Miller

tipc: same receive code path for connection protocol and data messages

2014-06-27T19:50:56+00:00

As a preparation to eliminate port_lock we need to bring reception
of connection protocol messages under proper protection of bh_lock_sock
or socket owner.

We fix this by letting those messages follow the same code path as
incoming data messages.

As a side effect of this change, the last reference to the function
net_route_msg() disappears, and we can eliminate that function.

Signed-off-by: Jon Maloy 
Reviewed-by: Erik Hugne 
Reviewed-by: Ying Xue 
Signed-off-by: David S. Miller