linux-toradex.git/net/wireless/chan.c, branch v4.10

cfg80211: add start / stop NAN commands

2016-09-30T11:21:14+00:00

This allows user space to start/stop NAN interface.
A NAN interface is like P2P device in a few aspects: it
doesn't have a netdev associated to it.
Add the new interface type and prevent operations that
can't be executed on NAN interface like scan.

Define several attributes that may be configured by user space
when starting NAN functionality (master preference and dual
band operation)

Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-08-18T00:26:58+00:00

Pull networking fixes from David Miller:

 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
    Fietkau.

 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.

 3) Fix some tg3 ethtool logic bugs, and one that would cause no
    interrupts to be generated when rx-coalescing is set to 0.  From
    Satish Baddipadige and Siva Reddy Kallam.

 4) QLCNIC mailbox corruption and napi budget handling fix from Manish
    Chopra.

 5) Fix fib_trie logic when walking the trie during /proc/net/route
    output than can access a stale node pointer.  From David Forster.

 6) Several sctp_diag fixes from Phil Sutter.

 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.

 8) Checksum fixup fixes in bpf from Daniel Borkmann.

 9) Memork leaks in nfnetlink, from Liping Zhang.

10) Use after free in rxrpc, from David Howells.

11) Use after free in new skb_array code of macvtap driver, from Jason
    Wang.

12) Calipso resource leak, from Colin Ian King.

13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.

14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.

15) Fix lockdep splats in macsec, from Sabrina Dubroca.

16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
    handling.

17) Various tc-action bug fixes, from CONG Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net_sched: allow flushing tc police actions
  net_sched: unify the init logic for act_police
  net_sched: convert tcf_exts from list to pointer array
  net_sched: move tc offload macros to pkt_cls.h
  net_sched: fix a typo in tc_for_each_action()
  net_sched: remove an unnecessary list_del()
  net_sched: remove the leftover cleanup_a()
  mlxsw: spectrum: Allow packets to be trapped from any PG
  mlxsw: spectrum: Unmap 802.1Q FID before destroying it
  mlxsw: spectrum: Add missing rollbacks in error path
  mlxsw: reg: Fix missing op field fill-up
  mlxsw: spectrum: Trap loop-backed packets
  mlxsw: spectrum: Add missing packet traps
  mlxsw: spectrum: Mark port as active before registering it
  mlxsw: spectrum: Create PVID vPort before registering netdevice
  mlxsw: spectrum: Remove redundant errors from the code
  mlxsw: spectrum: Don't return upon error in removal path
  i40e: check for and deal with non-contiguous TCs
  ixgbe: Re-enable ability to toggle VLAN filtering
  ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
  ...

tree-wide: replace config_enabled() with IS_ENABLED()

2016-08-04T12:50:07+00:00

The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Acked-by: Kees Cook 
Cc: Stas Sergeev 
Cc: Matt Redfearn 
Cc: Joshua Kinard 
Cc: Jiri Slaby 
Cc: Bjorn Helgaas 
Cc: Borislav Petkov 
Cc: Markos Chandras 
Cc: "Dmitry V. Levin" 
Cc: yu-cheng yu 
Cc: James Hogan 
Cc: Brian Gerst 
Cc: Johannes Berg 
Cc: Peter Zijlstra 
Cc: Al Viro 
Cc: Will Drewry 
Cc: Nikolay Martynov 
Cc: Huacai Chen 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Daniel Borkmann 
Cc: Leonid Yegoshin 
Cc: Rafal Milecki 
Cc: James Cowgill 
Cc: Greg Kroah-Hartman 
Cc: Ralf Baechle 
Cc: Alex Smith 
Cc: Adam Buchbinder 
Cc: Qais Yousef 
Cc: Jiang Liu 
Cc: Mikko Rapeli 
Cc: Paul Gortmaker 
Cc: Denys Vlasenko 
Cc: Brian Norris 
Cc: Hidehiro Kawai 
Cc: "Luis R. Rodriguez" 
Cc: Andy Lutomirski 
Cc: Ingo Molnar 
Cc: Dave Hansen 
Cc: "Kirill A. Shutemov" 
Cc: Roland McGrath 
Cc: Paul Burton 
Cc: Kalle Valo 
Cc: Viresh Kumar 
Cc: Tony Wu 
Cc: Huaitong Han 
Cc: Sumit Semwal 
Cc: Alexei Starovoitov 
Cc: Juergen Gross 
Cc: Jason Cooper 
Cc: "David S. Miller" 
Cc: Oleg Nesterov 
Cc: Andrea Gelmini 
Cc: David Woodhouse 
Cc: Marc Zyngier 
Cc: Rabin Vincent 
Cc: "Maciej W. Rozycki" 
Cc: David Daney 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

cfg80211: fix missing break in NL8211_CHAN_WIDTH_80P80 case

2016-08-02T07:50:25+00:00

The switch on chandef->width is missing a break on the
NL8211_CHAN_WIDTH_80P80 case; currently we get a WARN_ON when
center_freq2 is non-zero because of the missing break.

Signed-off-by: Colin Ian King 
Signed-off-by: Johannes Berg

cfg80211: make wdev_list accessible to drivers

2016-05-12T09:16:40+00:00

There's no harm in having drivers read the list, since they can
use RCU protection or RTNL locking; allow this to not require
each and every driver to also implement its own bookkeeping.

Signed-off-by: Johannes Berg

cfg80211: remove enum ieee80211_band

2016-04-12T13:56:15+00:00

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.

Signed-off-by: Johannes Berg

cfg80211: use RTNL locked reg_can_beacon for IR-relaxation

2015-07-17T13:02:02+00:00

The RTNL is required to check for IR-relaxation conditions that allow
more channels to beacon. Export an RTNL locked version of reg_can_beacon
and use it where possible in AP/STA interface type flows, where
IR-relaxation may be applicable.

Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA")
Signed-off-by: Arik Nemtsov 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg

cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA

2015-05-06T13:50:02+00:00

The GO_CONCURRENT regulatory definition can be extended to station
interfaces requesting to IR as part of TDLS off-channel operations.
Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added
use-case.

Change internal users of GO_CONCURRENT to use the new definition.

Signed-off-by: Arik Nemtsov 
Reviewed-by: Johannes Berg 
Signed-off-by: Johannes Berg

cfg80211: Allow GO concurrent relaxation after BSS disconnection

2015-05-06T12:47:28+00:00

If a P2P GO was allowed on a channel because of the GO concurrent
relaxation, i.e., another station interface was associated to an AP on
the same channel or the same UNII band, and the station interface
disconnected from the AP, allow the following use cases unless the
channel is marked as indoor only and the device is not operating in an
indoor environment:

1. Allow the P2P GO to stay on its current channel. The rationale behind
   this is that if the channel or UNII band were allowed by the AP they
   could still be used to continue the P2P GO operation, and avoid connection
   breakage.
2. Allow another P2P GO to start on the same channel or another channel
   that is in the same UNII band as the previous instantiated P2P GO.

Signed-off-by: Avraham Stern 
Signed-off-by: Arik Nemtsov 
Signed-off-by: Ilan Peer 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg

cfg80211: Fix 160 MHz channels with 80+80 and 160 MHz drivers

2014-12-12T11:18:47+00:00

The VHT supported channel width field is a two bit integer, not a
bitfield. cfg80211_chandef_usable() was interpreting it incorrectly and
ended up rejecting 160 MHz channel width if the driver indicated support
for both 160 and 80+80 MHz channels.

Cc: stable@vger.kernel.org (3.16+)
Fixes: 3d9d1d6656a73 ("nl80211/cfg80211: support VHT channel configuration")
       (however, no real drivers had 160 MHz support it until 3.16)
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg