linux-toradex.git/net/wireless/nl80211.h, branch v3.10.88 Linux kernel for Apalis and Colibri modules cfg80211: move exported event functions into nl80211 2013-03-06T15:35:46+00:00 Johannes Berg johannes.berg@intel.com 2013-02-22T21:05:20+00:00 947add36ca2dcd61c5b07347f029a5bafb9efb4e This is the sort of thing gcc's LTO could do, but since we don't have that yet we can also do it manually. The advantage is reduced code, both source and binary, e.g. on x86-64 text data bss dec hex filename 442825 56230 776 499831 7a077 cfg80211.ko (before) 441585 56230 776 498591 79b9f cfg80211.ko (after) a reduction of ~1k. But in order to not complicate the code move only those functions that are simple wrappers, not those that have functionality of their own. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
This is the sort of thing gcc's LTO could do, but since
we don't have that yet we can also do it manually. The
advantage is reduced code, both source and binary, e.g.
on x86-64

   text	   data	    bss	    dec	    hex	filename
 442825	  56230	    776	 499831	  7a077	cfg80211.ko (before)
 441585	  56230	    776	 498591	  79b9f	cfg80211.ko (after)

a reduction of ~1k.

But in order to not complicate the code move only those
functions that are simple wrappers, not those that have
functionality of their own.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211/cfg80211: add radar detection command/event 2013-02-15T08:40:18+00:00 Simon Wunderlich simon.wunderlich@s2003.tu-chemnitz.de 2013-02-08T17:16:19+00:00 04f39047af2a6df64b763ea5a271db24879d0391 Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel
Availability Check (CAC). This command will also notify the
usermode about events (CAC finished, CAC aborted, radar
detected, NOP finished).
Once radar detection has started it should continuously
monitor for radars as long as the channel is active.

This patch enables DFS for AP mode in nl80211/cfg80211.

Based on original patch by Victor Goldenshtein <victorg@ti.com>

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: pass a channel definition struct 2012-11-26T11:42:58+00:00 Johannes Berg johannes.berg@intel.com 2012-11-08T20:25:48+00:00 683b6d3b31a51956ea540df00abb0b78894924c1 Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Instead of passing a channel pointer and channel type
to all functions and driver methods, pass a new channel
definition struct. Right now, this struct contains just
the control channel and channel type, but for VHT this
will change.

Also, add a small inline cfg80211_get_chandef_type() so
that drivers don't need to use the _type field of the
new structure all the time, which will change.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: remove remain-on-channel channel type 2012-11-26T11:42:58+00:00 Johannes Berg johannes.berg@intel.com 2012-11-08T17:31:02+00:00 42d97a599eb6b2aab3a401b3e5799a399d6c7652 As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
As mwifiex (and mac80211 in the software case) are the
only drivers actually implementing remain-on-channel
with channel type, userspace can't be relying on it.
This is the case, as it's used only for P2P operations
right now.

Rather than adding a flag to tell userspace whether or
not it can actually rely on it, simplify all the code
by removing the ability to use different channel types.
Leave only the validation of the attribute, so that if
we extend it again later (with the needed capability
flag), it can't break userspace sending invalid data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211/nl80211: Notify connection request failure in AP mode 2012-09-18T17:54:06+00:00 Pandiyarajan Pitchaimuthu c_ppitch@qca.qualcomm.com 2012-09-18T11:20:49+00:00 ed44a951c72ab409f932b1c15914488308e86da2 In AP mode, when a station requests connection to an AP and if the request is failed for particular reason, userspace is notified about the failure through NL80211_CMD_CONN_FAILED command. Reason for the failure is sent through the attribute NL80211_ATTR_CONN_FAILED_REASON. Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
In AP mode, when a station requests connection to an AP and if the
request is failed for particular reason, userspace is notified about the
failure through NL80211_CMD_CONN_FAILED command. Reason for the failure
is sent through the attribute NL80211_ATTR_CONN_FAILED_REASON.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: support TX error rate CQM 2012-07-17T09:57:23+00:00 Thomas Pedersen c_tpeder@qca.qualcomm.com 2012-07-12T23:17:33+00:00 84f10708f73254878246772cead70a2eb6a123f2 Let the user configure serveral TX error conection quality monitoring parameters: % error rate, survey interval, and # of attempted packets. On exceeding the TX failure rate over the given interval, the driver will send a CQM notify event with the actual TX failure rate and packets attempted. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Let the user configure serveral TX error conection quality monitoring
parameters: % error rate, survey interval, and # of attempted packets.

On exceeding the TX failure rate over the given interval, the driver
will send a CQM notify event with the actual TX failure rate and
packets attempted.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211: move scan API to wdev 2012-07-12T10:10:41+00:00 Johannes Berg johannes.berg@intel.com 2012-06-18T17:17:03+00:00 fd0142844efa85d89017c89227a0f03de1eee327 The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The new P2P Device will have to be able to scan for
P2P search, so move scanning to use struct wireless_dev
instead of struct net_device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: use wdev in mgmt-tx/ROC APIs 2012-07-09T12:51:47+00:00 Johannes Berg johannes.berg@intel.com 2012-06-15T13:30:18+00:00 71bbc9943883cffaf5d7a7728a4e4c50b3ac44d3 The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The management frame and remain-on-channel APIs will be
needed in the P2P device abstraction, so move them over
to the new wdev-based APIs. Userspace can still use both
the interface index and wdev identifier for them so it's
backward compatible, but for the P2P Device wdev it will
be able to use the wdev identifier only.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: add channel switch notify event 2012-04-11T20:23:59+00:00 Thomas Pedersen c_tpeder@qca.qualcomm.com 2012-04-06T20:35:47+00:00 5314526b1743e8e8614293db7d86e480b4fe9824 The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
The firmware may decide to switch channels while already beaconing, e.g.
in response to a cfg80211 connect request on a different vif. Add this
event to notify userspace when an AP or GO interface has successfully
migrated to a new channel, so it can update its configuration
accordingly.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
cfg80211/mac80211: report signal strength for mgmt frames 2012-03-06T20:16:05+00:00 Johannes Berg johannes.berg@intel.com 2012-03-05T21:18:41+00:00 804483e90794256f9ed53e795ffbf1e94de237c8 Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Add the signal strength (in dBm only for now) to
frames that are received via nl80211's various
frame APIs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>