linux-toradex.git/net/wireless, branch v4.9.45

cfg80211: Check if NAN service ID is of expected size

2017-07-21T05:42:20+00:00

commit 0a27844ce86d039d74221dd56cd8c0349b146b63 upstream.

nla policy checks for only maximum length of the attribute data when the
attribute type is NLA_BINARY. If userspace sends less data than
specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC,
nla policy check ensures that userspace sends minimum specified length
number of bytes.

Remove type assignment to NLA_BINARY from nla_policy of
NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure
minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from
userspace with NL80211_NAN_FUNC_SERVICE_ID.

Fixes: a442b761b24 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Check if PMKID attribute is of expected size

2017-07-21T05:42:20+00:00

commit 9361df14d1cbf966409d5d6f48bb334384fbe138 upstream.

nla policy checks for only maximum length of the attribute data
when the attribute type is NLA_BINARY. If userspace sends less
data than specified, the wireless drivers may access illegal
memory. When type is NLA_UNSPEC, nla policy check ensures that
userspace sends minimum specified length number of bytes.

Remove type assignment to NLA_BINARY from nla_policy of
NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum
WLAN_PMKID_LEN bytes are received from userspace with
NL80211_ATTR_PMKID.

Fixes: 67fbb16be69d ("nl80211: PMKSA caching support")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES

2017-07-21T05:42:20+00:00

commit d7f13f7450369281a5d0ea463cc69890a15923ae upstream.

validate_scan_freqs() retrieves frequencies from attributes
nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with
nla_get_u32(), which reads 4 bytes from each attribute
without validating the size of data received. Attributes
nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy.

Validate size of each attribute before parsing to avoid potential buffer
overread.

Fixes: 2a519311926 ("cfg80211/nl80211: scanning (and mac80211 update to use it)")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE

2017-07-21T05:42:19+00:00

commit 8feb69c7bd89513be80eb19198d48f154b254021 upstream.

Buffer overread may happen as nl80211_set_station() reads 4 bytes
from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without
validating the size of data received when userspace sends less
than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE.
Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid
the buffer overread.

Fixes: 3b1c5a5307f ("{cfg,nl}80211: mesh power mode primitives and userspace access")
Signed-off-by: Srinivas Dasari 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mac80211: strictly check mesh address extension mode

2017-06-24T05:11:13+00:00

commit 5667c86acf021e6dcf02584408b4484a273ac68f upstream.

Mesh forwarding path checks for address extension mode to fetch
appropriate proxied address and MPP address. Existing condition
that looks for 6 address format is not strict enough so that
frames with improper values are processed and invalid entries
are added into MPP table. Fix that by adding a stricter check before
processing the packet.

Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension
mode 0x3 as reserved one. And also Table Table 9-13 does not specify
0x3 as valid address field.

Fixes: 9b395bc3be1c ("mac80211: verify that skb data is present")
Signed-off-by: Rajkumar Manoharan 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

cfg80211: check rdev resume callback only for registered wiphy

2017-04-12T10:41:11+00:00

commit b3ef5520c1eabb56064474043c7c55a1a65b8708 upstream.

We got the following use-after-free KASAN report:

 BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211]
	 at addr ffff8803fc244090
 Read of size 8 by task kworker/u16:24/2587
 CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G    B 4.9.13-debug+
 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016
 Workqueue: events_unbound async_run_entry_fn
  ffff880425d4f9d8 ffffffffaeedb541 ffff88042b80ef00 ffff8803fc244088
  ffff880425d4fa00 ffffffffae84d7a1 ffff880425d4fa98 ffff8803fc244080
  ffff88042b80ef00 ffff880425d4fa88 ffffffffae84da3a ffffffffc141f7d9
 Call Trace:
  [] dump_stack+0x85/0xc4
  [] kasan_object_err+0x21/0x70
  [] kasan_report_error+0x1fa/0x500
  [] ? cfg80211_bss_age+0x39/0xc0 [cfg80211]
  [] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211]
  [] ? trace_hardirqs_on+0xd/0x10
  [] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
  [] __asan_report_load8_noabort+0x61/0x70
  [] ? wiphy_suspend+0xbb0/0xc70 [cfg80211]
  [] ? wiphy_resume+0x591/0x5a0 [cfg80211]
  [] wiphy_resume+0x591/0x5a0 [cfg80211]
  [] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
  [] dpm_run_callback+0x6e/0x4f0
  [] device_resume+0x1c2/0x670
  [] async_resume+0x1d/0x50
  [] async_run_entry_fn+0xfe/0x610
  [] process_one_work+0x716/0x1a50
  [] ? process_one_work+0x679/0x1a50
  [] ? _raw_spin_unlock_irq+0x3d/0x60
  [] ? pwq_dec_nr_in_flight+0x2b0/0x2b0
  [] worker_thread+0xe0/0x1460
  [] ? process_one_work+0x1a50/0x1a50
  [] kthread+0x222/0x2e0
  [] ? kthread_park+0x80/0x80
  [] ? kthread_park+0x80/0x80
  [] ? kthread_park+0x80/0x80
  [] ret_from_fork+0x2a/0x40
 Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024
 Allocated:
 PID = 71
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_kmalloc+0xad/0xe0
  kasan_slab_alloc+0x12/0x20
  __kmalloc_track_caller+0x134/0x360
  kmemdup+0x20/0x50
  brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac]
  brcmf_bus_start+0x19a/0x9a0 [brcmfmac]
  brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac]
  brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac]
  request_firmware_work_func+0x135/0x280
  process_one_work+0x716/0x1a50
  worker_thread+0xe0/0x1460
  kthread+0x222/0x2e0
  ret_from_fork+0x2a/0x40
 Freed:
 PID = 2568
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_slab_free+0x71/0xb0
  kfree+0xe8/0x2e0
  brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac]
  brcmf_detach+0x14a/0x2b0 [brcmfmac]
  brcmf_pcie_remove+0x140/0x5d0 [brcmfmac]
  brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac]
  pci_pm_resume+0x186/0x220
  dpm_run_callback+0x6e/0x4f0
  device_resume+0x1c2/0x670
  async_resume+0x1d/0x50
  async_run_entry_fn+0xfe/0x610
  process_one_work+0x716/0x1a50
  worker_thread+0xe0/0x1460
  kthread+0x222/0x2e0
  ret_from_fork+0x2a/0x40
 Memory state around the buggy address:
  ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                          ^
  ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

What is happening is that brcmf_pcie_resume() detects a device that
is no longer responsive and it decides to unbind resulting in a
wiphy_unregister() and wiphy_free() call. Now the wiphy instance
remains allocated, because PM needs to call wiphy_resume() for it.
However, brcmfmac already does a kfree() for the struct
cfg80211_registered_device::ops field. Change the checks in
wiphy_resume() to only access the struct cfg80211_registered_device::ops
if the wiphy instance is still registered at this time.

Reported-by: Daniel J Blueman 
Reviewed-by: Hante Meuleman 
Reviewed-by: Pieter-Paul Giesberts 
Reviewed-by: Franky Lin 
Signed-off-by: Arend van Spriel 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: fix dumpit error path RTNL deadlocks

2017-03-30T07:41:28+00:00

commit ea90e0dc8cecba6359b481e24d9c37160f6f524f upstream.

Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out
to be perfectly accurate - there are various error paths that miss unlock
of the RTNL.

To fix those, change the locking a bit to not be conditional in all those
nl80211_prepare_*_dump() functions, but make those require the RTNL to
start with, and fix the buggy error paths. This also let me use sparse
(by appropriately overriding the rtnl_lock/rtnl_unlock functions) to
validate the changes.

Reported-by: Sowmini Varadhan 
Reported-by: Dmitry Vyukov 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: Fix mesh HT operation check

2017-02-14T23:25:37+00:00

commit fd551bac4795854adaa87bad7e5136083719802b upstream.

A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE
missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET
with checking codes. This results in dropping the received HT
operation value when called by nl80211_update_mesh_config(). Fix
this by setting the flag properly.

Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value")
Signed-off-by: Masashi Honma 
[rewrite commit message to use Fixes: line]
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: fix sched scan netlink socket owner destruction

2017-01-19T19:18:00+00:00

commit 753aacfd2e95df6a0caf23c03dc309020765bea9 upstream.

A single netlink socket might own multiple interfaces *and* a
scheduled scan request (which might belong to another interface),
so when it goes away both may need to be destroyed.

Remove the schedule_scan_stop indirection to fix this - it's only
needed for interface destruction because of the way this works
right now, with a single work taking care of all interfaces.

Fixes: 93a1e86ce10e4 ("nl80211: Stop scheduled scan if netlink client disappears")
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

nl80211: Use different attrs for BSSID and random MAC addr in scan req

2017-01-12T10:39:23+00:00

commit 2fa436b3a2a7009c11a3bc03fe0ff4c26e80fd87 upstream.

NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned
and the random MAC address to be used when privacy is enabled. When both
the features are enabled, both the BSSID and the local MAC address were
getting same value causing Probe Request frames to go with unintended
DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID
attribute to set the specific BSSID (which was the more recent addition
in cfg80211) for a scan.

Backwards compatibility with old userspace software is maintained to
some extent by allowing NL80211_ATTR_MAC to be used to set the specific
BSSID when scanning without enabling random MAC address use.

Scanning with random source MAC address was introduced by commit
ad2b26abc157 ("cfg80211: allow drivers to support random MAC addresses
for scan") and the issue was introduced with the addition of the second
user for the same attribute in commit 818965d39177 ("cfg80211: Allow a
scan request for a specific BSSID").

Fixes: 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID")
Signed-off-by: Vamsi Krishna 
Signed-off-by: Jouni Malinen 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman