linux-toradex.git/net/wireless, branch v5.18 Linux kernel for Apalis and Colibri modules nl80211: fix locking in nl80211_set_tx_bitrate_mask() 2022-05-09T12:00:07+00:00 Johannes Berg johannes.berg@intel.com 2022-05-06T08:21:38+00:00 f971e1887fdb3ab500c9bebf4b98f62d49a20655 This accesses the wdev's chandef etc., so cannot safely be used without holding the lock. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220506102136.06b7205419e6.I2a87c05fbd8bc5e565e84d190d4cfd2e92695a90@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
This accesses the wdev's chandef etc., so cannot safely
be used without holding the lock.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220506102136.06b7205419e6.I2a87c05fbd8bc5e565e84d190d4cfd2e92695a90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: retrieve S1G operating channel number 2022-05-04T09:33:52+00:00 Kieran Frewen kieran.frewen@morsemicro.com 2022-04-20T04:13:20+00:00 e847ffe2d146cfd52980ca688d84358e024a6e70 When retrieving the S1G channel number from IEs, we should retrieve the operating channel instead of the primary channel. The S1G operation element specifies the main channel of operation as the oper channel, unlike for HT and HE which specify their main channel of operation as the primary channel. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Signed-off-by: Bassem Dawood <bassem@morsemicro.com> Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
When retrieving the S1G channel number from IEs, we should retrieve
the operating channel instead of the primary channel. The S1G operation
element specifies the main channel of operation as the oper channel,
unlike for HT and HE which specify their main channel of operation as
the primary channel.

Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211: validate S1G channel width 2022-05-04T09:33:39+00:00 Kieran Frewen kieran.frewen@morsemicro.com 2022-04-20T04:13:21+00:00 5d087aa759eb82b8208411913f6c2158bd85abc0 Validate the S1G channel width input by user to ensure it matches that of the requested channel Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Signed-off-by: Bassem Dawood <bassem@morsemicro.com> Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Validate the S1G channel width input by user to ensure it matches
that of the requested channel

Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: hold bss_lock while updating nontrans_list 2022-04-11T09:55:36+00:00 Rameshkumar Sundaram quic_ramess@quicinc.com 2022-04-11T09:07:51+00:00 a5199b5626cd6913cf8776a835bc63d40e0686ad Synchronize additions to nontrans_list of transmitting BSS with bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails __cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert on bss_lock). So protect the whole block with bss_lock to avoid races and warnings. Found during code review. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211: correctly check NL80211_ATTR_REG_ALPHA2 size 2022-04-11T09:55:33+00:00 Johannes Berg johannes.berg@intel.com 2022-04-11T09:42:03+00:00 6624bb34b4eb19f715db9908cca00122748765d7 We need this to be at least two bytes, so we can access alpha2[0] and alpha2[1]. It may be three in case some userspace used NUL-termination since it was NLA_STRING (and we also push it out with NUL-termination). Cc: stable@vger.kernel.org Reported-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).

Cc: stable@vger.kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2022-03-11T21:00:17+00:00 Jakub Kicinski kuba@kernel.org 2022-03-11T21:00:16+00:00 0b3660695e80d53d1bab5b458f3a897a2c427a59 Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Johannes Berg says:

====================
brcmfmac
 * add BCM43454/6 support

rtw89
 * add support for 160 MHz channels and 6 GHz band
 * hardware scan support

iwlwifi
 * support UHB TAS enablement via BIOS
 * remove a bunch of W=1 warnings
 * add support for channel switch offload
 * support 32 Rx AMPDU sessions in newer devices
 * add support for a couple of new devices
 * add support for band disablement via BIOS

mt76
 * mt7915 thermal management improvements
 * SAR support for more mt76 drivers
 * mt7986 wmac support on mt7915

ath11k
 * debugfs interface to configure firmware debug log level
 * debugfs interface to test Target Wake Time (TWT)
 * provide 802.11ax High Efficiency (HE) data via radiotap

ath9k
 * use hw_random API instead of directly dumping into random.c

wcn36xx
 * fix wcn3660 to work on 5 GHz band

ath6kl
 * add device ID for WLU5150-D81

cfg80211/mac80211
 * initial EHT (from 802.11be) support
   (EHT rates, 320 MHz, larger block-ack)
 * support disconnect on HW restart

* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
  mac80211: Add support to trigger sta disconnect on hardware restart
  mac80211: fix potential double free on mesh join
  mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
  nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
  mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  rtw89: 8852c: process logic efuse map
  rtw89: 8852c: process efuse of phycap
  rtw89: support DAV efuse reading operation
  rtw89: 8852c: add chip::dle_mem
  rtw89: add page_regs to handle v1 chips
  rtw89: add chip_info::{h2c,c2h}_reg to support more chips
  rtw89: add hci_func_en_addr to support variant generation
  rtw89: add power_{on/off}_func
  rtw89: read chip version depends on chip ID
  rtw89: pci: use a struct to describe all registers address related to DMA channel
  rtw89: pci: add V1 of PCI channel address
  rtw89: pci: add struct rtw89_pci_info
  rtw89: 8852c: add 8852c empty files
  MAINTAINERS: add devicetree bindings entry for mt76
  ...

====================

Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireless: Use netif_rx(). 2022-03-06T11:05:31+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2022-03-05T22:12:52+00:00 f9834dbdd322f144f7b51f2fe8017fc6b870b3ec Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
Since commit
   baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-03-03T19:55:12+00:00 Jakub Kicinski kuba@kernel.org 2022-03-03T19:55:12+00:00 80901bff812984624918d9d03f9286e3245ee9a5 net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
net/batman-adv/hard-interface.c
  commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
  commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/

net/smc/af_smc.c
  commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
  commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nl80211: Update bss channel on channel switch for P2P_CLIENT 2022-03-02T21:37:05+00:00 Sreeramya Soratkal quic_ssramya@quicinc.com 2022-03-01T06:03:20+00:00 e50b88c4f076242358b66ddb67482b96947438f2 The wdev channel information is updated post channel switch only for the station mode and not for the other modes. Due to this, the P2P client still points to the old value though it moved to the new channel when the channel change is induced from the P2P GO. Update the bss channel after CSA channel switch completion for P2P client interface as well. Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com> Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.

Update the bss channel after CSA channel switch completion for P2P client
interface as well.

Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211: fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo 2022-03-01T13:10:14+00:00 Johannes Berg johannes.berg@intel.com 2022-02-21T14:55:12+00:00 a12f76345e026f1b300a0d17c56f020b6949b093 The kbuild change here accidentally removed not only the unquoting, but also the last character of the variable name. Fix that. Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.

Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>