Replace the use of `as_ptr` which works through `<CStr as Deref<Target=&[u8]>::deref()` in preparation for replacing `kernel::str::CStr` with `core::ffi::CStr` as the latter does not implement `Deref<Target=&[u8]>`. Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://patch.msgid.link/20251018-cstr-core-v18-12-9378a54385f8@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
Prepare for `core::ffi::CStr` taking the place of `kernel::str::CStr` by avoid methods that only exist on the latter. Also avoid `Deref<Target=BStr> for CStr` as that impl doesn't exist on `core::ffi::CStr`. Link: https://github.com/Rust-for-Linux/linux/issues/1075 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Re-export `configfs_attrs` from `configfs` module, so that users can import the macro from the `configfs` module rather than the root of the `kernel` crate. Also update users to import from the new path. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-6-b5212cc89b98@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the previous patch we added Opaque::cast_from() that performs the opposite operation to Opaque::raw_get(). For consistency with this naming, rename raw_get() to cast_from(). There are a few other options such as calling cast_from() something closer to raw_get() rather than renaming this method. However, I could not find a great naming scheme that works with raw_get(). The previous version of this patch used from_raw(), but functions of that name typically have a different signature, so that's not a great option. Suggested-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Benno Lossin <lossin@kernel.org> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Acked-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250624-opaque-from-raw-v2-2-e4da40bdc59c@google.com [ Removed `HrTimer::raw_get` change. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull pin-init updates from Benno Lossin:
"Added:
- 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are now
(pin-)initializers.
- 'Zeroable::init_zeroed()' delegating to 'init_zeroed()'.
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'.
- Implement 'Zeroable' for 'Option<&T>' and 'Option<&mut T>'.
- Implement 'Zeroable' for 'Option<[unsafe] [extern "abi"]
fn(...args...) -> ret>' for '"Rust"' and '"C"' ABIs and up to 20
arguments.
Changed:
- Blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'.
- Renamed 'zeroed()' to 'init_zeroed()'.
Upstream dev news:
- More CI improvements to deny warnings, use '--all-targets'. Also
check the synchronization status of the two '-next' branches in
upstream and the kernel."
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
* tag 'pin-init-v6.17' of https://github.com/Rust-for-Linux/linux:
rust: pin-init: examples, tests: use `ignore` instead of conditionally compiling tests
rust: init: remove doctest's `Error::from_errno` workaround
rust: init: re-enable doctests
rust: pin-init: implement `ZeroableOption` for function pointers with up to 20 arguments
rust: pin-init: change `impl Zeroable for Option<NonNull<T>>` to `ZeroableOption for NonNull<T>`
rust: pin-init: implement `ZeroableOption` for `&T` and `&mut T`
rust: pin-init: add `zeroed()` & `Zeroable::zeroed()` functions
rust: pin-init: add `Zeroable::init_zeroed`
rust: pin-init: rename `zeroed` to `init_zeroed`
rust: pin-init: feature-gate the `stack_init_reuse` test on the `std` feature
rust: pin-init: examples: pthread_mutex: disable the main test for miri
rust: pin-init: examples, tests: add conditional compilation in order to compile under any feature combination
rust: pin-init: change blanket impls for `[Pin]Init` and add one for `Result<T, E>`
rust: pin-init: improve safety documentation for `impl<T> [Pin]Init<T> for T`
Use a consistent `# Examples` heading in rustdoc across the codebase. Some modules previously used `## Examples` (even when they should be available as top-level headers), while others used `# Example`, which deviates from the preferred `# Examples` style. Suggested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Benno Lossin <lossin@kernel.org> Link: https://lore.kernel.org/r/ddd5ce0ac20c99a72a4f1e4322d3de3911056922.1749545815.git.viresh.kumar@linaro.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.78.0, Clippy introduced the `ref_as_ptr` lint [1]: > Using `as` casts may result in silently changing mutability or type. While this doesn't eliminate unchecked `as` conversions, it makes such conversions easier to scrutinize. It also has the slight benefit of removing a degree of freedom on which to bikeshed. Thus apply the changes and enable the lint -- no functional change intended. Link: https://rust-lang.github.io/rust-clippy/master/index.html#ref_as_ptr [1] Suggested-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/all/D8PGG7NTWB6U.3SS3A5LN4XWMN@proton.me/ Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-6-f43b024581e8@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.51.0, Clippy introduced the `ptr_as_ptr` lint [1]: > Though `as` casts between raw pointers are not terrible, > `pointer::cast` is safer because it cannot accidentally change the > pointer's mutability, nor cast the pointer to other types like `usize`. There are a few classes of changes required: - Modules generated by bindgen are marked `#[allow(clippy::ptr_as_ptr)]`. - Inferred casts (` as _`) are replaced with `.cast()`. - Ascribed casts (` as *... T`) are replaced with `.cast::<T>()`. - Multistep casts from references (` as *const _ as *const T`) are replaced with `core::ptr::from_ref(&x).cast()` with or without `::<T>` according to the previous rules. The `core::ptr::from_ref` call is required because `(x as *const _).cast::<T>()` results in inference failure. - Native literal C strings are replaced with `c_str!().as_char_ptr()`. - `*mut *mut T as _` is replaced with `let *mut *const T = (*mut *mut T)`.cast();` since pointer to pointer can be confusing. Apply these changes and enable the lint -- no functional change intended. Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_as_ptr [1] Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-1-f43b024581e8@gmail.com [ Added `.cast()` for `opp`. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The name `zeroed` is a much better fit for a function that returns the type by-value. Link: https://github.com/Rust-for-Linux/pin-init/pull/56/commits/7dbe38682c9725405bab91dcabe9c4d8893d2f5e [ also rename uses in `rust/kernel/init.rs` - Benno] Link: https://lore.kernel.org/all/20250523145125.523275-2-lossin@kernel.org [ Fix wrong replacement of `mem::zeroed` in the definition of `trait Zeroable`. - Benno ] [ Also change occurrences of `zeroed` in `configfs.rs` - Benno ] Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Benno Lossin <lossin@kernel.org>