linux-toradex.git/rust, branch v7.0-rc1 Linux kernel for Apalis and Colibri modules Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux 2026-02-22T16:43:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T16:43:31+00:00 1dd419145d090f8fdf149cbb39dea6d968659dd2 Pull rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Pass '-Zunstable-options' flag required by the future Rust 1.95.0 - Fix 'objtool' warning for Rust 1.84.0 'kernel' crate: - 'irq' module: add missing bound detected by the future Rust 1.95.0 - 'list' module: add missing 'unsafe' blocks and placeholder safety comments to macros (an issue for future callers within the crate) 'pin-init' crate: - Clean Clippy warning that changed behavior in the future Rust 1.95.0" * tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: rust: list: Add unsafe blocks for container_of and safety comments rust: pin-init: replace clippy `expect` with `allow` rust: irq: add `'static` bounds to irq callbacks objtool/rust: add one more `noreturn` Rust function rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0 
Pull rust fixes from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Pass '-Zunstable-options' flag required by the future Rust 1.95.0

   - Fix 'objtool' warning for Rust 1.84.0

  'kernel' crate:

   - 'irq' module: add missing bound detected by the future Rust 1.95.0

   - 'list' module: add missing 'unsafe' blocks and placeholder safety
     comments to macros (an issue for future callers within the crate)

  'pin-init' crate:

   - Clean Clippy warning that changed behavior in the future Rust
     1.95.0"

* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
  rust: list: Add unsafe blocks for container_of and safety comments
  rust: pin-init: replace clippy `expect` with `allow`
  rust: irq: add `'static` bounds to irq callbacks
  objtool/rust: add one more `noreturn` Rust function
  rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
rust: list: Add unsafe blocks for container_of and safety comments 2026-02-20T00:59:51+00:00 Philipp Stanner phasta@kernel.org 2026-02-16T13:16:15+00:00 97b281d7edb2ae662365be2809cd728470119720 impl_list_item_mod.rs calls container_of! without unsafe blocks at a couple of places. Since container_of! is unsafe, the blocks are strictly necessary. The problem was so far not visible because the "unsafe-op-in-unsafe-fn" check is a lint rather than a hard compiler error, and Rust suppresses lints triggered inside of a macro from another crate. Thus, the error becomes only visible once someone from within the kernel crate tries to use linked lists: error[E0133]: call to unsafe function `core::ptr::mut_ptr::<impl *mut T>::byte_sub` is unsafe and requires unsafe block --> rust/kernel/lib.rs:252:29 | 252 | let container_ptr = field_ptr.byte_sub(offset).cast::<$Container>(); | ^^^^^^^^^^^^^^^^^^^^^^^^^^ call to unsafe function | ::: rust/kernel/drm/jq.rs:98:1 | 98 | / impl_list_item! { 99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; } 100 | | } | |_- in this macro invocation | note: an unsafe function restricts its caller, but its body is safe by default --> rust/kernel/list/impl_list_item_mod.rs:216:13 | 216 | unsafe fn view_value(me: *mut $crate::list::ListLinks<$num>) -> *const Self { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | ::: rust/kernel/drm/jq.rs:98:1 | 98 | / impl_list_item! { 99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; } 100 | | } | |_- in this macro invocation = note: requested on the command line with `-D unsafe-op-in-unsafe-fn` = note: this error originates in the macro `$crate::container_of` which comes from the expansion of the macro `impl_list_item` Therefore, add unsafe blocks to container_of! calls to fix the issue. [ As discussed, let's fix the build for those that want to use the macro within the `kernel` crate now and we can discuss the proper safety comments afterwards. Thus I removed the ones from the patch. However, we cannot just avoid the comments with `CLIPPY=1`, so I provided placeholders for now, like we did in the past. They were also needed for an `unsafe impl`. While I am not happy about it, it isn't worse than the current status (the comments were meant to be there), and at least this shows what is missing -- our pre-existing "good first issue" [1] may motivate new contributors to complete them properly. Finally, I moved one of the existing safety comments one line down so that Clippy could locate it. Link: https://github.com/Rust-for-Linux/linux/issues/351 [1] - Miguel ] Cc: stable@vger.kernel.org Fixes: c77f85b347dd ("rust: list: remove OFFSET constants") Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20260216131613.45344-3-phasta@kernel.org [ Fixed formatting. Reworded to fix the lint suppression explanation. Indent build error. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 
impl_list_item_mod.rs calls container_of! without unsafe blocks at a
couple of places. Since container_of! is unsafe, the blocks are strictly
necessary.

The problem was so far not visible because the "unsafe-op-in-unsafe-fn"
check is a lint rather than a hard compiler error, and Rust suppresses
lints triggered inside of a macro from another crate.

Thus, the error becomes only visible once someone from within the kernel
crate tries to use linked lists:

    error[E0133]: call to unsafe function `core::ptr::mut_ptr::<impl *mut T>::byte_sub`
    is unsafe and requires unsafe block
       --> rust/kernel/lib.rs:252:29
        |
    252 |           let container_ptr = field_ptr.byte_sub(offset).cast::<$Container>();
        |                               ^^^^^^^^^^^^^^^^^^^^^^^^^^ call to unsafe function
        |
       ::: rust/kernel/drm/jq.rs:98:1
        |
    98  | / impl_list_item! {
    99  | |     impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
    100 | | }
        | |_- in this macro invocation
        |
    note: an unsafe function restricts its caller, but its body is safe by default
       --> rust/kernel/list/impl_list_item_mod.rs:216:13
        |
    216 |               unsafe fn view_value(me: *mut $crate::list::ListLinks<$num>) -> *const Self {
        |               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
        |
       ::: rust/kernel/drm/jq.rs:98:1
        |
    98  | / impl_list_item! {
    99  | |     impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
    100 | | }
        | |_- in this macro invocation
        = note: requested on the command line with `-D unsafe-op-in-unsafe-fn`
        = note: this error originates in the macro `$crate::container_of` which comes
        from the expansion of the macro `impl_list_item`

Therefore, add unsafe blocks to container_of! calls to fix the issue.

[ As discussed, let's fix the build for those that want to use the
  macro within the `kernel` crate now and we can discuss the proper
  safety comments afterwards. Thus I removed the ones from the patch.

  However, we cannot just avoid the comments with `CLIPPY=1`, so I
  provided placeholders for now, like we did in the past. They were
  also needed for an `unsafe impl`.

  While I am not happy about it, it isn't worse than the current
  status (the comments were meant to be there), and at least this
  shows what is missing -- our pre-existing "good first issue" [1]
  may motivate new contributors to complete them properly.

  Finally, I moved one of the existing safety comments one line down
  so that Clippy could locate it.

  Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]

    - Miguel ]

Cc: stable@vger.kernel.org
Fixes: c77f85b347dd ("rust: list: remove OFFSET constants")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260216131613.45344-3-phasta@kernel.org
[ Fixed formatting. Reworded to fix the lint suppression
  explanation. Indent build error. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust: pin-init: replace clippy `expect` with `allow` 2026-02-19T08:33:43+00:00 Benno Lossin lossin@kernel.org 2026-02-15T13:22:30+00:00 a58b8764aed9648357b1c5b6368c9943ba33b7f9 `clippy` has changed behavior in [1] (Rust 1.95) where it no longer warns about the `let_and_return` lint when a comment is placed between the let binding and the return expression. Nightly thus fails to build, because the expectation is no longer fulfilled. Thus replace the expectation with an `allow`. [ The errors were: error: this lint expectation is unfulfilled --> rust/pin-init/src/lib.rs:1279:10 | 1279 | #[expect(clippy::let_and_return)] | ^^^^^^^^^^^^^^^^^^^^^^ | = note: `-D unfulfilled-lint-expectations` implied by `-D warnings` = help: to override `-D warnings` add `#[allow(unfulfilled_lint_expectations)]` error: this lint expectation is unfulfilled --> rust/pin-init/src/lib.rs:1295:10 | 1295 | #[expect(clippy::let_and_return)] | ^^^^^^^^^^^^^^^^^^^^^^ - Miguel ] Link: https://github.com/rust-lang/rust-clippy/pull/16461 [1] Signed-off-by: Benno Lossin <lossin@kernel.org> Cc: stable@vger.kernel.org # Needed in 6.18.y and later. Link: https://patch.msgid.link/20260215132232.1549861-1-lossin@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 
`clippy` has changed behavior in [1] (Rust 1.95) where it no longer
warns about the `let_and_return` lint when a comment is placed between
the let binding and the return expression. Nightly thus fails to build,
because the expectation is no longer fulfilled.

Thus replace the expectation with an `allow`.

[ The errors were:

      error: this lint expectation is unfulfilled
          --> rust/pin-init/src/lib.rs:1279:10
           |
      1279 | #[expect(clippy::let_and_return)]
           |          ^^^^^^^^^^^^^^^^^^^^^^
           |
           = note: `-D unfulfilled-lint-expectations` implied by `-D warnings`
           = help: to override `-D warnings` add `#[allow(unfulfilled_lint_expectations)]`

      error: this lint expectation is unfulfilled
          --> rust/pin-init/src/lib.rs:1295:10
           |
      1295 | #[expect(clippy::let_and_return)]
           |          ^^^^^^^^^^^^^^^^^^^^^^

    - Miguel ]

Link: https://github.com/rust-lang/rust-clippy/pull/16461 [1]
Signed-off-by: Benno Lossin <lossin@kernel.org>
Cc: stable@vger.kernel.org # Needed in 6.18.y and later.
Link: https://patch.msgid.link/20260215132232.1549861-1-lossin@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust: irq: add `'static` bounds to irq callbacks 2026-02-19T08:29:36+00:00 Benno Lossin lossin@kernel.org 2026-02-14T09:27:40+00:00 621609f1e5ca43a75edd497dd1c28bd84aa66433 These callback functions take a generic `T` that is used in the body as the generic argument in `Registration` and `ThreadedRegistration`. Those types require `T: 'static`, but due to a compiler bug this requirement isn't propagated to the function. Thus add the bound. This was caught in the upstream Rust CI [1]. [ The three errors looked similar and will start appearing with Rust 1.95.0 (expected 2026-04-16). The first one was: error[E0310]: the parameter type `T` may not live long enough Error: --> rust/kernel/irq/request.rs:266:43 | 266 | let registration = unsafe { &*(ptr as *const Registration<T>) }; | ^^^^^^^^^^^^^^^^^^^^^^ | | | the parameter type `T` must be valid for the static lifetime... | ...so that the type `T` will meet its required lifetime bounds | help: consider adding an explicit lifetime bound | 264 | unsafe extern "C" fn handle_irq_callback<T: Handler + 'static>(_irq: i32, ptr: *mut c_void) -> c_uint { | +++++++++ - Miguel ] Link: https://github.com/rust-lang/rust/pull/149389 [1] Signed-off-by: Benno Lossin <lossin@kernel.org> Cc: stable@vger.kernel.org Fixes: 29e16fcd67ee ("rust: irq: add &Device<Bound> argument to irq callbacks") Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/rust-for-linux/20260217222425.8755-1-cole@unwrap.rs/ Link: https://patch.msgid.link/20260214092740.3201946-1-lossin@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 
These callback functions take a generic `T` that is used in the body as
the generic argument in `Registration` and `ThreadedRegistration`. Those
types require `T: 'static`, but due to a compiler bug this requirement
isn't propagated to the function. Thus add the bound. This was caught in
the upstream Rust CI [1].

[ The three errors looked similar and will start appearing with Rust
  1.95.0 (expected 2026-04-16). The first one was:

      error[E0310]: the parameter type `T` may not live long enough
      Error:    --> rust/kernel/irq/request.rs:266:43
          |
      266 |     let registration = unsafe { &*(ptr as *const Registration<T>) };
          |                                           ^^^^^^^^^^^^^^^^^^^^^^
          |                                           |
          |                                           the parameter type `T` must be valid for the static lifetime...
          |                                           ...so that the type `T` will meet its required lifetime bounds
          |
      help: consider adding an explicit lifetime bound
          |
      264 | unsafe extern "C" fn handle_irq_callback<T: Handler + 'static>(_irq: i32, ptr: *mut c_void) -> c_uint {
          |                                                     +++++++++

    - Miguel ]

Link: https://github.com/rust-lang/rust/pull/149389 [1]
Signed-off-by: Benno Lossin <lossin@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29e16fcd67ee ("rust: irq: add &Device<Bound> argument to irq callbacks")
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/20260217222425.8755-1-cole@unwrap.rs/
Link: https://patch.msgid.link/20260214092740.3201946-1-lossin@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2026-02-17T17:36:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-17T17:36:43+00:00 17f8d2009367c3da82882f70ccbdca9f8c7b5f20 Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1. Overall more lines were removed than added, thanks to dropping the obsolete isp1362 USB host controller driver, always a nice change. Other than that, nothing major happening here, highlights are: - lots of dwc3 driver updates and new hardware support added - usb gadget function driver updates - usb phy driver updates - typec driver updates and additions - USB rust binding updates for syntax and formatting changes - more usb serial device ids added - other smaller USB core and driver updates and additions All of these have been in linux-next for a long time, with no reported problems" * tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits) usb: typec: ucsi: Add Thunderbolt alternate mode support usb: typec: hd3ss3220: Check if regulator needs to be switched usb: phy: tegra: parametrize PORTSC1 register offset usb: phy: tegra: parametrize HSIC PTS value usb: phy: tegra: return error value from utmi_wait_register usb: phy: tegra: cosmetic fixes dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support usb: dwc2: fix resume failure if dr_mode is host usb: cdns3: fix role switching during resume usb: dwc3: gadget: Move vbus draw to workqueue context USB: serial: option: add Telit FN920C04 RNDIS compositions usb: dwc3: Log dwc3 address in traces usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN usb: phy: tegra: add HSIC support usb: phy: tegra: use phy type directly usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi usb: typec: ucsi: Support mode selection to activate altmodes usb: typec: Introduce mode_selection bit usb: typec: Implement mode selection usb: typec: Expose alternate mode priority via sysfs ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt driver updates for
  7.0-rc1. Overall more lines were removed than added, thanks to
  dropping the obsolete isp1362 USB host controller driver, always a
  nice change.

  Other than that, nothing major happening here, highlights are:

   - lots of dwc3 driver updates and new hardware support added

   - usb gadget function driver updates

   - usb phy driver updates

   - typec driver updates and additions

   - USB rust binding updates for syntax and formatting changes

   - more usb serial device ids added

   - other smaller USB core and driver updates and additions

  All of these have been in linux-next for a long time, with no reported
  problems"

* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
  usb: typec: ucsi: Add Thunderbolt alternate mode support
  usb: typec: hd3ss3220: Check if regulator needs to be switched
  usb: phy: tegra: parametrize PORTSC1 register offset
  usb: phy: tegra: parametrize HSIC PTS value
  usb: phy: tegra: return error value from utmi_wait_register
  usb: phy: tegra: cosmetic fixes
  dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
  usb: dwc2: fix resume failure if dr_mode is host
  usb: cdns3: fix role switching during resume
  usb: dwc3: gadget: Move vbus draw to workqueue context
  USB: serial: option: add Telit FN920C04 RNDIS compositions
  usb: dwc3: Log dwc3 address in traces
  usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
  usb: phy: tegra: add HSIC support
  usb: phy: tegra: use phy type directly
  usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
  usb: typec: ucsi: Support mode selection to activate altmodes
  usb: typec: Introduce mode_selection bit
  usb: typec: Implement mode selection
  usb: typec: Expose alternate mode priority via sysfs
  ...
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2026-02-17T17:11:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-17T17:11:04+00:00 505d195b0f96fd613a51b13dde37aa5ad301eb32 Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ... 
Pull char/misc/IIO driver updates from Greg KH:
 "Here is the big set of char/misc/iio and other smaller driver
  subsystem changes for 7.0-rc1. Lots of little things in here,
  including:

   - Loads of iio driver changes and updates and additions

   - gpib driver updates

   - interconnect driver updates

   - i3c driver updates

   - hwtracing (coresight and intel) driver updates

   - deletion of the obsolete mwave driver

   - binder driver updates (rust and c versions)

   - mhi driver updates (causing a merge conflict, see below)

   - mei driver updates

   - fsi driver updates

   - eeprom driver updates

   - lots of other small char and misc driver updates and cleanups

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
  mux: mmio: fix regmap leak on probe failure
  rust_binder: return p from rust_binder_transaction_target_node()
  drivers: android: binder: Update ARef imports from sync::aref
  rust_binder: fix needless borrow in context.rs
  iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
  iio: sca3000: Fix a resource leak in sca3000_probe()
  iio: proximity: rfd77402: Add interrupt handling support
  iio: proximity: rfd77402: Document device private data structure
  iio: proximity: rfd77402: Use devm-managed mutex initialization
  iio: proximity: rfd77402: Use kernel helper for result polling
  iio: proximity: rfd77402: Align polling timeout with datasheet
  iio: cros_ec: Allow enabling/disabling calibration mode
  iio: frequency: ad9523: correct kernel-doc bad line warning
  iio: buffer: buffer_impl.h: fix kernel-doc warnings
  iio: gyro: itg3200: Fix unchecked return value in read_raw
  MAINTAINERS: add entry for ADE9000 driver
  iio: accel: sca3000: remove unused last_timestamp field
  iio: accel: adxl372: remove unused int2_bitmask field
  iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
  iio: magnetometer: Remove IRQF_ONESHOT
  ...
Merge tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs 2026-02-16T21:00:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-16T21:00:36+00:00 45a43ac5acc90b8f4835eea92692f620e561a06b Pull more misc vfs updates from Christian Brauner: "Features: - Optimize close_range() from O(range size) to O(active FDs) by using find_next_bit() on the open_fds bitmap instead of linearly scanning the entire requested range. This is a significant improvement for large-range close operations on sparse file descriptor tables. - Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only. Add tracepoints for fs-verity enable and verify operations, replacing the previously removed debug printk's. - Prevent nfsd from exporting special kernel filesystems like pidfs and nsfs. These filesystems have custom ->open() and ->permission() export methods that are designed for open_by_handle_at(2) only and are incompatible with nfsd. Update the exportfs documentation accordingly. Fixes: - Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used on a non-null-terminated decrypted directory entry name from fscrypt. This triggered on encrypted lower layers when the decrypted name buffer contained uninitialized tail data. The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and name_is_dot_dotdot() helpers, replacing various open-coded "." and ".." checks across the tree. - Fix read-only fsflags not being reset together with xflags in vfs_fileattr_set(). Currently harmless since no read-only xflags overlap with flags, but this would cause inconsistencies for any future shared read-only flag - Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the target process is in a different pid namespace. This lets userspace distinguish "process exited" from "process in another namespace", matching glibc's pidfd_getpid() behavior Cleanups: - Use C-string literals in the Rust seq_file bindings, replacing the kernel::c_str!() macro (available since Rust 1.77) - Fix typo in d_walk_ret enum comment, add porting notes for the readlink_copy() calling convention change" * tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: add porting notes about readlink_copy() pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns nfsd: do not allow exporting of special kernel filesystems exportfs: clarify the documentation of open()/permission() expotrfs ops fsverity: add tracepoints fs: add FS_XFLAG_VERITY for fs-verity files rust: seq_file: replace `kernel::c_str!` with C-Strings fs: dcache: fix typo in enum d_walk_ret comment ovl: use name_is_dot* helpers in readdir code fs: add helpers name_is_dot{,dot,_dotdot} ovl: Fix uninit-value in ovl_fill_real fs: reset read-only fsflags together with xflags fs/file: optimize close_range() complexity from O(N) to O(Sparse) 
Pull more misc vfs updates from Christian Brauner:
 "Features:

   - Optimize close_range() from O(range size) to O(active FDs) by using
     find_next_bit() on the open_fds bitmap instead of linearly scanning
     the entire requested range. This is a significant improvement for
     large-range close operations on sparse file descriptor tables.

   - Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
     via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
     Add tracepoints for fs-verity enable and verify operations,
     replacing the previously removed debug printk's.

   - Prevent nfsd from exporting special kernel filesystems like pidfs
     and nsfs. These filesystems have custom ->open() and ->permission()
     export methods that are designed for open_by_handle_at(2) only and
     are incompatible with nfsd. Update the exportfs documentation
     accordingly.

  Fixes:

   - Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
     on a non-null-terminated decrypted directory entry name from
     fscrypt. This triggered on encrypted lower layers when the
     decrypted name buffer contained uninitialized tail data.

     The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
     name_is_dot_dotdot() helpers, replacing various open-coded "." and
     ".." checks across the tree.

   - Fix read-only fsflags not being reset together with xflags in
     vfs_fileattr_set(). Currently harmless since no read-only xflags
     overlap with flags, but this would cause inconsistencies for any
     future shared read-only flag

   - Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
     target process is in a different pid namespace. This lets userspace
     distinguish "process exited" from "process in another namespace",
     matching glibc's pidfd_getpid() behavior

  Cleanups:

   - Use C-string literals in the Rust seq_file bindings, replacing the
     kernel::c_str!() macro (available since Rust 1.77)

   - Fix typo in d_walk_ret enum comment, add porting notes for the
     readlink_copy() calling convention change"

* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: add porting notes about readlink_copy()
  pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
  nfsd: do not allow exporting of special kernel filesystems
  exportfs: clarify the documentation of open()/permission() expotrfs ops
  fsverity: add tracepoints
  fs: add FS_XFLAG_VERITY for fs-verity files
  rust: seq_file: replace `kernel::c_str!` with C-Strings
  fs: dcache: fix typo in enum d_walk_ret comment
  ovl: use name_is_dot* helpers in readdir code
  fs: add helpers name_is_dot{,dot,_dotdot}
  ovl: Fix uninit-value in ovl_fill_real
  fs: reset read-only fsflags together with xflags
  fs/file: optimize close_range() complexity from O(N) to O(Sparse)
Merge tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux 2026-02-12T22:01:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-12T22:01:38+00:00 8c0901b6f9c807a6aa33dccedc548bf10c17a85c Pull configfs updates from Andreas Hindborg: - Switch the configfs rust bindings to use c string literals provided by the compiler, rather than a macro - A follow up on constifying `configfs_item_operations`, applying the change to the configfs sample * tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux: samples: configfs: Constify struct configfs_item_operations and configfs_group_operations rust: configfs: replace `kernel::c_str!` with C-Strings 
Pull configfs updates from Andreas Hindborg:

 - Switch the configfs rust bindings to use c string literals provided
   by the compiler, rather than a macro

 - A follow up on constifying `configfs_item_operations`, applying the
   change to the configfs sample

* tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
  samples: configfs: Constify struct configfs_item_operations and configfs_group_operations
  rust: configfs: replace `kernel::c_str!` with C-Strings
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2026-02-12T20:13:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-12T20:13:01+00:00 136114e0abf03005e182d75761ab694648e6d388 Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... 
Pull non-MM updates from Andrew Morton:

 - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
   disk space by teaching ocfs2 to reclaim suballocator block group
   space (Heming Zhao)

 - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
   ARRAY_END() macro and uses it in various places (Alejandro Colomar)

 - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
   the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
   page size (Pnina Feder)

 - "kallsyms: Prevent invalid access when showing module buildid" cleans
   up kallsyms code related to module buildid and fixes an invalid
   access crash when printing backtraces (Petr Mladek)

 - "Address page fault in ima_restore_measurement_list()" fixes a
   kexec-related crash that can occur when booting the second-stage
   kernel on x86 (Harshit Mogalapalli)

 - "kho: ABI headers and Documentation updates" updates the kexec
   handover ABI documentation (Mike Rapoport)

 - "Align atomic storage" adds the __aligned attribute to atomic_t and
   atomic64_t definitions to get natural alignment of both types on
   csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)

 - "kho: clean up page initialization logic" simplifies the page
   initialization logic in kho_restore_page() (Pratyush Yadav)

 - "Unload linux/kernel.h" moves several things out of kernel.h and into
   more appropriate places (Yury Norov)

 - "don't abuse task_struct.group_leader" removes the usage of
   ->group_leader when it is "obviously unnecessary" (Oleg Nesterov)

 - "list private v2 & luo flb" adds some infrastructure improvements to
   the live update orchestrator (Pasha Tatashin)

* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
  watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
  procfs: fix missing RCU protection when reading real_parent in do_task_stat()
  watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
  kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
  kho: fix doc for kho_restore_pages()
  tests/liveupdate: add in-kernel liveupdate test
  liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
  liveupdate: luo_file: Use private list
  list: add kunit test for private list primitives
  list: add primitives for private list manipulations
  delayacct: fix uapi timespec64 definition
  panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
  netclassid: use thread_group_leader(p) in update_classid_task()
  RDMA/umem: don't abuse current->group_leader
  drm/pan*: don't abuse current->group_leader
  drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
  drm/amdgpu: don't abuse current->group_leader
  android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
  android/binder: don't abuse current->group_leader
  kho: skip memoryless NUMA nodes when reserving scratch areas
  ...
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2026-02-12T03:31:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-12T03:31:52+00:00 37a93dd5c49b5fda807fd204edf2547c3493319c Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ... 
Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - A significant effort all around the stack to guide the compiler to
     make the right choice when inlining code, to avoid unneeded calls
     for small helper and stack canary overhead in the fast-path.

     This generates better and faster code with very small or no text
     size increases, as in many cases the call generated more code than
     the actual inlined helper.

   - Extend AccECN implementation so that is now functionally complete,
     also allow the user-space enabling it on a per network namespace
     basis.

   - Add support for memory providers with large (above 4K) rx buffer.
     Paired with hw-gro, larger rx buffer sizes reduce the number of
     buffers traversing the stack, dincreasing single stream CPU usage
     by up to ~30%.

   - Do not add HBH header to Big TCP GSO packets. This simplifies the
     RX path, the TX path and the NIC drivers, and is possible because
     user-space taps can now interpret correctly such packets without
     the HBH hint.

   - Allow IPv6 routes to be configured with a gateway address that is
     resolved out of a different interface than the one specified,
     aligning IPv6 to IPv4 behavior.

   - Multi-queue aware sch_cake. This makes it possible to scale the
     rate shaper of sch_cake across multiple CPUs, while still enforcing
     a single global rate on the interface.

   - Add support for the nbcon (new buffer console) infrastructure to
     netconsole, enabling lock-free, priority-based console operations
     that are safer in crash scenarios.

   - Improve the TCP ipv6 output path to cache the flow information,
     saving cpu cycles, reducing cache line misses and stack use.

   - Improve netfilter packet tracker to resolve clashes for most
     protocols, avoiding unneeded drops on rare occasions.

   - Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

   - Reduce tcp socket size by one cache line.

   - Notify neighbour changes atomically, avoiding inconsistencies
     between the notification sequence and the actual states sequence.

   - Add vsock namespace support, allowing complete isolation of vsocks
     across different network namespaces.

   - Improve xsk generic performances with cache-alignment-oriented
     optimizations.

   - Support netconsole automatic target recovery, allowing netconsole
     to reestablish targets when underlying low-level interface comes
     back online.

  Driver API:

   - Support for switching the working mode (automatic vs manual) of a
     DPLL device via netlink.

   - Introduce PHY ports representation to expose multiple front-facing
     media ports over a single MAC.

   - Introduce "rx-polarity" and "tx-polarity" device tree properties,
     to generalize polarity inversion requirements for differential
     signaling.

   - Add helper to create, prepare and enable managed clocks.

  Device drivers:

   - Add Huawei hinic3 PF etherner driver.

   - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
     controller.

   - Add ethernet driver for MaxLinear MxL862xx switches

   - Remove parallel-port Ethernet driver.

   - Convert existing driver timestamp configuration reporting to
     hwtstamp_get and remove legacy ioctl().

   - Convert existing drivers to .get_rx_ring_count(), simplifing the RX
     ring count retrieval. Also remove the legacy fallback path.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt, bng):
         - bnxt: add FW interface update to support FEC stats histogram
           and NVRAM defragmentation
         - bng: add TSO and H/W GRO support
      - nVidia/Mellanox (mlx5):
         - improve latency of channel restart operations, reducing the
           used H/W resources
         - add TSO support for UDP over GRE over VLAN
         - add flow counters support for hardware steering (HWS) rules
         - use a static memory area to store headers for H/W GRO,
           leading to 12% RX tput improvement
      - Intel (100G, ice, idpf):
         - ice: reorganizes layout of Tx and Rx rings for cacheline
           locality and utilizes __cacheline_group* macros on the new
           layouts
         - ice: introduces Synchronous Ethernet (SyncE) support
      - Meta (fbnic):
         - adds debugfs for firmware mailbox and tx/rx rings vectors

   - Ethernet virtual:
      - geneve: introduce GRO/GSO support for double UDP encapsulation

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - some code refactoring and cleanups
      - RealTek (r8169):
         - add support for RTL8127ATF (10G Fiber SFP)
         - add dash and LTR support
      - Airoha:
         - AN8811HB 2.5 Gbps phy support
      - Freescale (fec):
         - add XDP zero-copy support
      - Thunderbolt:
         - add get link setting support to allow bonding
      - Renesas:
         - add support for RZ/G3L GBETH SoC

   - Ethernet switches:
      - Maxlinear:
         - support R(G)MII slow rate configuration
         - add support for Intel GSW150
      - Motorcomm (yt921x):
         - add DCB/QoS support
      - TI:
         - icssm-prueth: support bridging (STP/RSTP) via the switchdev
           framework

   - Ethernet PHYs:
      - Realtek:
         - enable SGMII and 2500Base-X in-band auto-negotiation
         - simplify and reunify C22/C45 drivers
      - Micrel: convert bindings to DT schema

   - CAN:
      - move skb headroom content into skb extensions, making CAN
        metadata access more robust

   - CAN drivers:
      - rcar_canfd:
         - add support for FD-only mode
         - add support for the RZ/T2H SoC
      - sja1000: cleanup the CAN state handling

   - WiFi:
      - implement EPPKE/802.1X over auth frames support
      - split up drop reasons better, removing generic RX_DROP
      - additional FTM capabilities: 6 GHz support, supported number of
        spatial streams and supported number of LTF repetitions
      - better mac80211 iterators to enumerate resources
      - initial UHR (Wi-Fi 8) support for cfg80211/mac80211

   - WiFi drivers:
      - Qualcomm/Atheros:
         - ath11k: support for Channel Frequency Response measurement
         - ath12k: a significant driver refactor to support multi-wiphy
           devices and and pave the way for future device support in the
           same driver (rather than splitting to ath13k)
         - ath12k: support for the QCC2072 chipset
      - Intel:
         - iwlwifi: partial Neighbor Awareness Networking (NAN) support
         - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
      - RealTek (rtw89):
         - preparations for RTL8922DE support

   - Bluetooth:
      - implement setsockopt(BT_PHY) to set the connection packet type/PHY
      - set link_policy on incoming ACL connections

   - Bluetooth drivers:
      - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
      - btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
  bnge/bng_re: Add a new HSI
  net: macb: Fix tx/rx malfunction after phy link down and up
  af_unix: Fix memleak of newsk in unix_stream_connect().
  net: ti: icssg-prueth: Add optional dependency on HSR
  net: dsa: add basic initial driver for MxL862xx switches
  net: mdio: add unlocked mdiodev C45 bus accessors
  net: dsa: add tag format for MxL862xx switches
  dt-bindings: net: dsa: add MaxLinear MxL862xx
  selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
  octeontx2-pf: Unregister devlink on probe failure
  net: renesas: rswitch: fix forwarding offload statemachine
  ionic: Rate limit unknown xcvr type messages
  tcp: inet6_csk_xmit() optimization
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
  ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
  ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
  ipv6: use np->final in inet6_sk_rebuild_header()
  ipv6: add daddr/final storage in struct ipv6_pinfo
  net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
  ...