linux-toradex.git/scripts/Kbuild.include, branch v5.1-rc1

kbuild: remove cc-version macro

2019-03-04T13:34:59+00:00

There is no more direct user of this macro; it is only used by
cc-ifversion.

Calling this macro is not efficient since it invokes the compiler to
get the compiler version. CONFIG_GCC_VERSION is already calculated in
the Kconfig stage, so Makefile can reuse it.

Here is a note about the slight difference between cc-version and
CONFIG_GCC_VERSION:

When using Clang, cc-version is evaluated to '0402' because Clang
defines __GNUC__ and __GNUC__MINOR__, and looks like GCC 4.2 in the
version point of view. On the other hand, CONFIG_GCC_VERSION=0
when $(CC) is clang.

There are currently two users of cc-ifversion:
  arch/mips/loongson64/Platform
  arch/powerpc/Makefile

They are not affected by this change.

The format of cc-version is , while CONFIG_GCC_VERSION
. I adjusted cc-ifversion for the difference of
the number of digits.

Signed-off-by: Masahiro Yamada

kbuild: refactor cc-cross-prefix implementation

2019-02-27T12:41:27+00:00

- $(word 1, ) is equivalent to $(firstword )

 - hardcode "gcc" instead of $(CC)

 - minimize the shell script part

A little more notes in case $(filter-out -%, ...) is not clear.

arch/mips/Makefile passes prefixes depending on the configuration.

CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- \
    $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-)

In the Kconfig stage (e.g. when you run 'make defconfig'), neither
CONFIG_32BIT nor CONFIG_64BIT is defined. So, $(tool-archpref) is
empty. As a result, "-linux -linux-gnu- -unknown-linux-gnu" is passed
into cc-cross-prefix. The command 'which' assumes arguments starting
with a hyphen as command options, then emits the following messages:

  Illegal option -l
  Illegal option -l
  Illegal option -u

I think it is strange to define CROSS_COMPILE depending on the CONFIG
options since you need to feed $(CC) to Kconfig, but it is how MIPS
Makefile currently works. Anyway, it would not hurt to filter-out
invalid strings beforehand.

Signed-off-by: Masahiro Yamada

kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^)

2019-01-28T00:11:17+00:00

In Kbuild, if_changed and friends must have FORCE as a prerequisite.

Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.

Add real-prereqs as a shorthand.

Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.

Signed-off-by: Masahiro Yamada 
Acked-by: Rob Herring

kbuild: remove unused baseprereq

2019-01-14T03:19:40+00:00

Commit eea199b445f6 ("kbuild: remove unnecessary LEX_PREFIX and
YACC_PREFIX") removed the last users of this macro.

Signed-off-by: Masahiro Yamada

kbuild: use assignment instead of define ... endef for filechk_* rules

2019-01-06T01:22:35+00:00

You do not have to use define ... endef for filechk_* rules.

For simple cases, the use of assignment looks cleaner, IMHO.

I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.

Signed-off-by: Masahiro Yamada 
Acked-by: Heiko Carstens

kbuild: change filechk to surround the given command with { }

2019-01-06T00:46:51+00:00

filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.

Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.

Signed-off-by: Masahiro Yamada

Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-12-29T20:03:17+00:00

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...

Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"

2018-12-19T11:00:28+00:00

This reverts commit 77b0bf55bc675233d22cd5df97605d516d64525e.

See this commit for details about the revert:

  e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")

 Conflicts:
	arch/x86/Makefile

Reported-by: Masahiro Yamada 
Reviewed-by: Borislav Petkov 
Reviewed-by: Thomas Gleixner 
Cc: Juergen Gross 
Cc: Richard Biener 
Cc: Kees Cook 
Cc: Segher Boessenkool 
Cc: Ard Biesheuvel 
Cc: Peter Zijlstra 
Cc: Josh Poimboeuf 
Cc: Nadav Amit 
Cc: Linus Torvalds 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

kbuild: move .SECONDARY special target to Kbuild.include

2018-12-02T05:11:49+00:00

In commit 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers"), I missed one important feature of the
.SECONDARY target:

    .SECONDARY with no prerequisites causes all targets to be
    treated as secondary.

... which agrees with the policy of Kbuild.

Let's move it to scripts/Kbuild.include, with no prerequisites.

Note:
If an intermediate file is generated by $(call if_changed,...), you
still need to add it to "targets" so its .*.cmd file is included.

The arm/arm64 crypto files are generated by $(call cmd,shipped),
so they do not need to be added to "targets", but need to be added
to "clean-files" so "make clean" can properly clean them away.

Signed-off-by: Masahiro Yamada

kbuild: refactor if_changed

2018-12-01T14:13:14+00:00

'@set -e; $(echo-cmd) $(cmd_$(1)' can be replaced with '$(cmd)'.

Signed-off-by: Masahiro Yamada