linux-toradex.git/scripts/mod, branch v2.6.22-rc7

kbuild: fix sh64 section mismatch problems

2007-06-11T19:52:04+00:00

There's a special .cranges section that is almost always generated,
with data being moved to the appropriate section by the linker at a later
stage.

To give a bit of background, sh64 has both a native SHmedia instruction
set (32-bit instructions) and SHcompact (which is compatability with
normal SH -- 16-bit, a massively reduced register set, etc.). code ranges
are emitted when we're using the 32-bit ABI, but not the 64-bit one.

It is a special staging section used solely by binutils where code with
different flags get placed (more specifically differing flags for input
and output sections), before being lazily merged by the linker.

The closest I've been able to find to documentation is:
  http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/ld/emultempl/sh64elf.em?rev=1.10&content-type=text/x-cvsweb-markup&cvsroot=src

It's an array of 8-byte Elf32_CRange structure given in
  http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/bfd/elf32-sh64.h?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=src
that describes for which ISA a range is used.

Silence the warnings by allowing references from .init.text to .cranges.

The following warnings are fixed:

WARNING: init/built-in.o(.cranges+0x0): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0xa): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x14): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x1e): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x28): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x32): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x50): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x5a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x64): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0xfa): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x104): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x10e): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x154): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x15e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x6e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x78): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x82): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0xaa): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x136): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x140): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x168): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1f4): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1fe): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x302): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x30c): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x316): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3a2): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3ac): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4ce): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4d8): Section mismatch: reference to .init.text:

Signed-off-by: Paul Mundt 
Cc: Kaz Kojima 
Signed-off-by: Sam Ravnborg

Revert "kbuild: make better section mismatch reports on i386, arm and mips"

2007-05-22T01:41:17+00:00

This reverts commit f892b7d480eec809a5dfbd6e65742b3f3155e50e, which
totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as
I can tell, is the only case where it should even matter!) due to a
SIGSEGV in modpost.

Cc: Sam Ravnborg 
Cc: Atsushi Nemoto 
Signed-off-by: Linus Torvalds

mm: fix section mismatch warnings

2007-05-19T07:11:58+00:00

modpost had two cases hardcoded for mm/
Shift over to __init_refok and kill the
hardcoded function names in modpost.

This has the drawback that the functions
will always be kept no matter configuration.
With previous code the function were placed in
init section if configuration allowed it.

Signed-off-by: Sam Ravnborg

init/main: use __init_refok to fix section mismatch

2007-05-19T07:11:58+00:00

Kill a special case in modpost by introducing the
__init_refok marker.

Signed-off-by: Sam Ravnborg

kbuild: introduce __init_refok/__initdata_refok to supress section mismatch warnings

2007-05-19T07:11:58+00:00

Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.

Idea from: Andrew Morton 

Signed-off-by: Sam Ravnborg 
Cc: Andrew Morton

kbuild: add "Section mismatch" warning whitelist for powerpc

2007-05-19T07:11:57+00:00

This patch fixes the following class of "Section mismatch" warnings when
building powerpc platforms.

WARNING: arch/powerpc/kernel/built-in.o - Section mismatch: reference to .init.data:.got2 from prom_entry (offset 0x0)
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:mpc8313_rdb_probe from .machine.desc after 'mach_mpc8313_rdb' (at offset 0x4)
....

Signed-off-by: Li Yang 
Signed-off-by: Sam Ravnborg

kbuild: make better section mismatch reports on i386, arm and mips

2007-05-19T07:11:57+00:00

On i386, ARM and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name.  This is because empty 'refsym' due to 0 r_addend
value.  This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.

Without this patch:
  MODPOST vmlinux
WARNING: init/built-in.o - Section mismatch: reference to .init.text: from .text between 'rest_init' (at offset 0xf4) and 'try_name'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'

With this patch:
  MODPOST vmlinux
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'

Now modpost can detect "kernel_init" name (and whitelist it) and show
"set_up_list3s" name.

Signed-off-by: Atsushi Nemoto 
Signed-off-by: Sam Ravnborg

kbuild: make modpost section warnings clearer

2007-05-19T07:11:57+00:00

Change modpost section mismatch warnings to be less confusing;
model them on the binutils linker warnings which we all know how
to interpret.

Also, fix the wrong ordering of arguments for the final case -
fromsec and refsymname were reversed.

Signed-off-by: Russell King 
Acked-by: Acked-by: David S. Miller 
Signed-off-by: Sam Ravnborg

kbuild: include limits.h in sumversion.c for PATH_MAX

2007-05-19T07:10:59+00:00

POSIX says limits.h defines PATH_MAX so we should include it (which fixes
compiling on some systems like OS X).

Signed-off-by: Mike Frysinger 
Signed-off-by: Sam Ravnborg

powerpc: Fix the MODALIAS generation in modpost for of devices

2007-05-19T07:10:10+00:00

Since the devices may have multiple (or none) compatible properties,
the uevent generated internally by the kernel may have multiple
"C..." entries. So the MODALIAS stored in the module must have
wilcard before and after the compatible entry.
Also, if the 'compatible' field is not used for matching, there
will be no 'C' and that must handled as well.

The previous code handled all those case incorrectly and it
"mostly" worked ... but not always.

Signed-off-by: Sylvain Munaut 
Signed-off-by: Paul Mackerras 
Signed-off-by: Sam Ravnborg