This is a temporary workaround added by commit f6e09b07cc12 ("kbuild:
do not put .scmversion into the source tarball").

Since commit 1cb86b6c3136 ("kbuild: save overridden KERNELRELEASE in
include/config/kernel.release"), the user-supplied KERNELRELEASE is
saved in include/config/kernel.release.

Remove it again.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.

Instead of cleaning, pass the exclude list to tar's --exclude-from
option.

Previously, the .config was contained in the source tarball.

With this commit, the source rpm consists of separate linux.tar.gz
and .config.

Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE.

In fact, deb-pkg does not rely on it any more because the generated
debian/rules specifies KERNELRELEASE from the command line.

Do likwise for (src)rpm-pkg, and remove this feature.
For the same reason, you do not need to save LOCALVERSION in the
spec file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

A fix was made in the mkspec script that uses a feature, ie. the
OR expression, which requires RPM 4.13. However, the script indicates
another minimum version. Lower versions may have success by using
the --no-deps option as suggested, but feels like bumping the version
to 4.13 is reasonable as it put me on the wrong track at first with
RPM 4.11 on my Centos7 machine.

Fixes: 02a893bc9975 ("kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.

Add it as an alternative package.

BTW, if it is impossible to solve the build requirement, the final
resort would be:

    $ make RPMOPTS=--nodeps rpm-pkg

This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.

NOTE1:
  Likewise, it is possible to bypass the build dependency check for
  debian package builds:

    $ make DPKG_FLAGS=-d deb-pkg

NOTE2:
  The 'or' operator is supported since RPM 4.13. So, old distros such
  as CentOS 7 will break. I suggest installing newer rpmbuild in such
  cases.

Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>

Changes:
- added new target 'srcrpm-pkg' to generate source rpm
- added required build tools to spec file
- removed locally compiled host tools to force their re-compile

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Íñigo Huguet <ihuguet@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

vmlinux.bz2 was added to the rpm packages in 2009 in the
fc370ecfdb37 ("kbuild: add vmlinux to kernel rpm") but seemingly hasn't
been used since.

Originally this should have been split up in a seperate debugging
package because it massively increases the size of the generated rpm's
e.g. kernel rpm built using binrpm-pkg on Fedora 36 default 5.19.8 kernel
config and localmodconfig is ~255MB with vmlinux.bz2 and only ~65MB
without it.

Make the kernel built rpms about 4x smaller by not including the unused
vmlinux.bz2 in them.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Doing make V=1 binrpm-pkg results in:

 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ
 + umask 022
 + cd .
 + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT
 + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot
 + make -f ./Makefile image_name
 + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+
 cp: invalid option -- 'e'
 Try 'cp --help' for more information.
 error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install)

Because the make call to get the image name is verbose and prints
additional information.

Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Cross-building (bin)rpm-pkg fails on several architectures.

For example, 'make ARCH=arm binrpm-pkg' fails like follows:

  sh ./scripts/package/mkspec prebuilt > ./binkernel.spec
  rpmbuild  --define "_builddir ." --target \
          arm -bb ./binkernel.spec
  Building target platforms: arm
  Building for target arm
  warning: line 19: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
  Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0S8t2F
  + umask 022
  + cd .
  + mkdir -p /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot
  + make -f ./Makefile image_name
  + cp arch/arm/boot/zImage /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot/vmlinuz-5.19.0-rc6
  + make -f ./Makefile INSTALL_MOD_PATH=/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch} modules_install
  make[3]: *** No rule to make target '/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.arch/arm/crypto/aes-arm-bs.ko{_arch}/lib/modules/5.19.0-rc6/kernel/%', needed by '__modinst'.  Stop.
  make[2]: *** [Makefile:1768: modules_install] Error 2
  error: Bad exit status from /var/tmp/rpm-tmp.0S8t2F (%install)

By default, 'buildroot' contains %{_arch} (see /usr/lib/rpm/macros).

_arch is generally defined in /usr/lib/rpm/platforms/*/macros, where
the platform sub-directory is specified by --target= option for cross
builds.

If the given arch does not exist, %{_arch} is not expanded.
In the example above, --target=arm is passed to rpmbuild, but
/usr/lib/rpm/platforms/arm-linux/ does not exist.

The '%' character in the path confuses GNU make and rpmbuild.

The same occurs for such architectures as csky, microblaze, nios2, etc.

Define _arch if it has not been defined.

Reported-by: Jason Self <jason@bluehome.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>