linux-toradex.git/security/integrity/integrity.h, branch v3.8.12

ima: change flags container data type

2012-09-19T12:55:20+00:00

IMA audit hashes patches introduced new IMA flags and required
space went beyond 8 bits. Currently the only flag is IMA_DIGSIG.
This patch use 16 bit short instead of 8 bit char.
Without this fix IMA signature will be replaced with hash, which
should not happen.

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar

ima: audit log hashes

2012-09-13T18:48:44+00:00

This adds an 'audit' policy action which audit logs file measurements.

Changelog v6:
 - use new action flag handling (Dmitry Kasatkin).
 - removed whitespace (Mimi)

Changelog v5:
 - use audit_log_untrustedstring.

Changelog v4:
 - cleanup digest -> hash conversion.
 - use filename rather than d_path in ima_audit_measurement.

Changelog v3:
 - Use newly exported audit_log_task_info for logging pid/ppid/uid/etc.
 - Update the ima_policy ABI documentation.

Changelog v2:
 - Use 'audit' action rather than 'measure_and_audit' to permit
 auditing in the absence of measuring..

Changelog v1:
 - Initial posting.

Signed-off-by: Peter Moody 
Signed-off-by: Mimi Zohar

ima: generic IMA action flag handling

2012-09-13T18:23:57+00:00

Make the IMA action flag handling generic in order to support
additional new actions, without requiring changes to the base
implementation.  New actions, like audit logging, will only
need to modify the define statements.

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar

ima: digital signature verification support

2012-09-07T18:57:48+00:00

This patch adds support for digital signature based integrity appraisal.
With this patch, 'security.ima' contains either the file data hash or
a digital signature of the file data hash. The file data hash provides
the security attribute of file integrity. In addition to file integrity,
a digital signature provides the security attribute of authenticity.

Unlike EVM, when the file metadata changes, the digital signature is
replaced with an HMAC, modification of the file data does not cause the
'security.ima' digital signature to be replaced with a hash. As a
result, after any modification, subsequent file integrity appraisals
would fail.

Although digitally signed files can be modified, but by not updating
'security.ima' to reflect these modifications, in essence digitally
signed files could be considered 'immutable'.

IMA uses a different keyring than EVM. While the EVM keyring should not
be updated after initialization and locked, the IMA keyring should allow
updating or adding new keys when upgrading or installing packages.

Changelog v4:
- Change IMA_DIGSIG to hex equivalent
Changelog v3:
- Permit files without any 'security.ima' xattr to be labeled properly.

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar

ima: add support for different security.ima data types

2012-09-07T18:57:47+00:00

IMA-appraisal currently verifies the integrity of a file based on a
known 'good' measurement value.  This patch reserves the first byte
of 'security.ima' as a place holder for the type of method used for
verifying file data integrity.

Changelog v1:
- Use the newly defined 'struct evm_ima_xattr_data'

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar

ima: integrity appraisal extension

2012-09-07T18:57:44+00:00

IMA currently maintains an integrity measurement list used to assert the
integrity of the running system to a third party.  The IMA-appraisal
extension adds local integrity validation and enforcement of the
measurement against a "good" value stored as an extended attribute
'security.ima'.  The initial methods for validating 'security.ima' are
hashed based, which provides file data integrity, and digital signature
based, which in addition to providing file data integrity, provides
authenticity.

This patch creates and maintains the 'security.ima' xattr, containing
the file data hash measurement.  Protection of the xattr is provided by
EVM, if enabled and configured.

Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata
integrity and, assuming success, compares the file's current hash value
with the one stored as an extended attribute in 'security.ima'.

Changelov v4:
- changed iint cache flags to hex values

Changelog v3:
- change appraisal default for filesystems without xattr support to fail

Changelog v2:
- fix audit msg 'res' value
- removed unused 'ima_appraise=' values

Changelog v1:
- removed unused iint mutex (Dmitry Kasatkin)
- setattr hook must not reset appraised (Dmitry Kasatkin)
- evm_verifyxattr() now differentiates between no 'security.evm' xattr
  (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the
  'security.evm' (INTEGRITY_NOXATTRS).
- replace hash_status with ima_status (Dmitry Kasatkin)
- re-initialize slab element ima_status on free (Dmitry Kasatkin)
- include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA
- merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin)
- removed unnecessary error variable in process_measurement() (Dmitry Kasatkin)
- use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured
  (moved ima_inode_post_setattr() to ima_appraise.c)
- make sure ima_collect_measurement() can read file

Changelog:
- add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin)
- fix the race condition between chmod, which takes the i_mutex and then
  iint->mutex, and ima_file_free() and process_measurement(), which take
  the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin)
- cleanup of ima_appraise_measurement() (Dmitry Kasatkin)
- changes as a result of the iint not allocated for all regular files, but
  only for those measured/appraised.
- don't try to appraise new/empty files
- expanded ima_appraisal description in ima/Kconfig
- IMA appraise definitions required even if IMA_APPRAISE not enabled
- add return value to ima_must_appraise() stub
- unconditionally set status = INTEGRITY_PASS *after* testing status,
  not before.  (Found by Joe Perches)

Signed-off-by: Mimi Zohar 
Signed-off-by: Dmitry Kasatkin

integrity: digital signature config option name change

2012-01-17T23:46:27+00:00

Similar to SIGNATURE, rename INTEGRITY_DIGSIG to INTEGRITY_SIGNATURE.

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: James Morris

integrity: digital signature verification using multiple keyrings

2011-11-09T14:51:09+00:00

Define separate keyrings for each of the different use cases - evm, ima,
and modules. Using different keyrings improves search performance, and also
allows "locking" specific keyring to prevent adding new keys.
This is useful for evm and module keyrings, when keys are usually only
added from initramfs.

Signed-off-by: Dmitry Kasatkin

integrity: sparse fix: move iint_initialized to integrity.h

2011-09-09T23:56:24+00:00

Sparse fix: move iint_initialized to integrity.h

Signed-off-by: James Morris

evm: replace hmac_status with evm_status

2011-07-18T16:29:48+00:00

We will use digital signatures in addtion to hmac.

Signed-off-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar