linux-toradex.git/security/keys/trusted.c, branch v4.10

tpm: fix checks for policy digest existence in tpm2_seal_trusted()

2016-02-10T02:10:55+00:00

In my original patch sealing with policy was done with dynamically
allocated buffer that I changed later into an array so the checks in
tpm2-cmd.c became invalid. This patch fixes the issue.

Fixes: 5beb0c435bdd ("keys, trusted: seal with a TPM2 authorization policy")
Reported-by: Dan Carpenter 
Signed-off-by: Jarkko Sakkinen 
Acked-by: Peter Huewe

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2016-01-18T03:13:15+00:00

Pull security subsystem updates from James Morris:

 - EVM gains support for loading an x509 cert from the kernel
   (EVM_LOAD_X509), into the EVM trusted kernel keyring.

 - Smack implements 'file receive' process-based permission checking for
   sockets, rather than just depending on inode checks.

 - Misc enhancments for TPM & TPM2.

 - Cleanups and bugfixes for SELinux, Keys, and IMA.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
  selinux: Inode label revalidation performance fix
  KEYS: refcount bug fix
  ima: ima_write_policy() limit locking
  IMA: policy can be updated zero times
  selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
  selinux: export validatetrans decisions
  gfs2: Invalid security labels of inodes when they go invalid
  selinux: Revalidate invalid inode security labels
  security: Add hook to invalidate inode security labels
  selinux: Add accessor functions for inode->i_security
  security: Make inode argument of inode_getsecid non-const
  security: Make inode argument of inode_getsecurity non-const
  selinux: Remove unused variable in selinux_inode_init_security
  keys, trusted: seal with a TPM2 authorization policy
  keys, trusted: select hash algorithm for TPM2 chips
  keys, trusted: fix: *do not* allow duplicate key options
  tpm_ibmvtpm: properly handle interrupted packet receptions
  tpm_tis: Tighten IRQ auto-probing
  tpm_tis: Refactor the interrupt setup
  tpm_tis: Get rid of the duplicate IRQ probing code
  ...

keys, trusted: seal with a TPM2 authorization policy

2015-12-20T13:27:13+00:00

TPM2 supports authorization policies, which are essentially
combinational logic statements repsenting the conditions where the data
can be unsealed based on the TPM state. This patch enables to use
authorization policies to seal trusted keys.

Two following new options have been added for trusted keys:

* 'policydigest=': provide an auth policy digest for sealing.
* 'policyhandle=': provide a policy session handle for unsealing.

If 'hash=' option is supplied after 'policydigest=' option, this
will result an error because the state of the option would become
mixed.

Signed-off-by: Jarkko Sakkinen 
Tested-by: Colin Ian King 
Reviewed-by: Mimi Zohar 
Acked-by: Peter Huewe

keys, trusted: select hash algorithm for TPM2 chips

2015-12-20T13:27:12+00:00

Added 'hash=' option for selecting the hash algorithm for add_key()
syscall and documentation for it.

Added entry for sm3-256 to the following tables in order to support
TPM_ALG_SM3_256:

* hash_algo_name
* hash_digest_size

Includes support for the following hash algorithms:

* sha1
* sha256
* sha384
* sha512
* sm3-256

Signed-off-by: Jarkko Sakkinen 
Tested-by: Colin Ian King 
Reviewed-by: James Morris 
Reviewed-by: Mimi Zohar 
Acked-by: Peter Huewe

keys, trusted: fix: do not allow duplicate key options

2015-12-20T13:27:12+00:00

The trusted keys option parsing allows specifying the same option
multiple times. The last option value specified is used.

This is problematic because:

* No gain.
* This makes complicated to specify options that are dependent on other
  options.

This patch changes the behavior in a way that option can be specified
only once.

Reported-by: James Morris James Morris 
Reviewed-by: Mimi Zohar 
Signed-off-by: Jarkko Sakkinen 
Acked-by: Peter Huewe

KEYS: Fix handling of stored error in a negatively instantiated user key

2015-11-25T03:19:47+00:00

If a user key gets negatively instantiated, an error code is cached in the
payload area.  A negatively instantiated key may be then be positively
instantiated by updating it with valid data.  However, the ->update key
type method must be aware that the error code may be there.

The following may be used to trigger the bug in the user key type:

    keyctl request2 user user "" @u
    keyctl add user user "a" @u

which manifests itself as:

	BUG: unable to handle kernel paging request at 00000000ffffff8a
	IP: [] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
	PGD 7cc30067 PUD 0
	Oops: 0002 [#1] SMP
	Modules linked in:
	CPU: 3 PID: 2644 Comm: a.out Not tainted 4.3.0+ #49
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	task: ffff88003ddea700 ti: ffff88003dd88000 task.ti: ffff88003dd88000
	RIP: 0010:[]  [] __call_rcu.constprop.76+0x1f/0x280
	 [] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
	RSP: 0018:ffff88003dd8bdb0  EFLAGS: 00010246
	RAX: 00000000ffffff82 RBX: 0000000000000000 RCX: 0000000000000001
	RDX: ffffffff81e3fe40 RSI: 0000000000000000 RDI: 00000000ffffff82
	RBP: ffff88003dd8bde0 R08: ffff88007d2d2da0 R09: 0000000000000000
	R10: 0000000000000000 R11: ffff88003e8073c0 R12: 00000000ffffff82
	R13: ffff88003dd8be68 R14: ffff88007d027600 R15: ffff88003ddea700
	FS:  0000000000b92880(0063) GS:ffff88007fd00000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
	CR2: 00000000ffffff8a CR3: 000000007cc5f000 CR4: 00000000000006e0
	Stack:
	 ffff88003dd8bdf0 ffffffff81160a8a 0000000000000000 00000000ffffff82
	 ffff88003dd8be68 ffff88007d027600 ffff88003dd8bdf0 ffffffff810a39e5
	 ffff88003dd8be20 ffffffff812a31ab ffff88007d027600 ffff88007d027620
	Call Trace:
	 [] kfree_call_rcu+0x15/0x20 kernel/rcu/tree.c:3136
	 [] user_update+0x8b/0xb0 security/keys/user_defined.c:129
	 [<     inline     >] __key_update security/keys/key.c:730
	 [] key_create_or_update+0x291/0x440 security/keys/key.c:908
	 [<     inline     >] SYSC_add_key security/keys/keyctl.c:125
	 [] SyS_add_key+0x101/0x1e0 security/keys/keyctl.c:60
	 [] entry_SYSCALL_64_fastpath+0x12/0x6a arch/x86/entry/entry_64.S:185

Note the error code (-ENOKEY) in EDX.

A similar bug can be tripped by:

    keyctl request2 trusted user "" @u
    keyctl add trusted user "a" @u

This should also affect encrypted keys - but that has to be correctly
parameterised or it will fail with EINVAL before getting to the bit that
will crashes.

Reported-by: Dmitry Vyukov 
Signed-off-by: David Howells 
Acked-by: Mimi Zohar 
Signed-off-by: James Morris

KEYS: Merge the type-specific data with the payload data

2015-10-21T14:18:36+00:00

Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.

Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.

Signed-off-by: David Howells 
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net

keys, trusted: seal/unseal with TPM 2.0 chips

2015-10-18T23:01:22+00:00

Call tpm_seal_trusted() and tpm_unseal_trusted() for TPM 2.0 chips.
We require explicit 'keyhandle=' option because there's no a fixed
storage root key inside TPM2 chips.

Signed-off-by: Jarkko Sakkinen 
Reviewed-by: Andreas Fuchs 
Tested-by: Mimi Zohar  (on TPM 1.2)
Tested-by: Chris J Arges 
Tested-by: Colin Ian King 
Tested-by: Kevin Strasser 
Signed-off-by: Peter Huewe

KEYS: Remove key_type::match in favour of overriding default by match_preparse

2014-09-16T16:36:06+00:00

A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.

Signed-off-by: David Howells 
Acked-by: Vivek Goyal

security: replace strict_strto() with kstrto()

2014-02-06T08:11:04+00:00

The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.

Signed-off-by: Jingoo Han 
Signed-off-by: James Morris