linux-toradex.git/security/keys, branch v4.8-rc1

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2016-07-30T00:38:46+00:00

Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2016-07-26T20:40:17+00:00

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.8:

  API:
   - first part of skcipher low-level conversions
   - add KPP (Key-agreement Protocol Primitives) interface.

  Algorithms:
   - fix IPsec/cryptd reordering issues that affects aesni
   - RSA no longer does explicit leading zero removal
   - add SHA3
   - add DH
   - add ECDH
   - improve DRBG performance by not doing CTR by hand

  Drivers:
   - add x86 AVX2 multibuffer SHA256/512
   - add POWER8 optimised crc32c
   - add xts support to vmx
   - add DH support to qat
   - add RSA support to caam
   - add Layerscape support to caam
   - add SEC1 AEAD support to talitos
   - improve performance by chaining requests in marvell/cesa
   - add support for Araneus Alea I USB RNG
   - add support for Broadcom BCM5301 RNG
   - add support for Amlogic Meson RNG
   - add support Broadcom NSP SoC RNG"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
  crypto: vmx - Fix aes_p8_xts_decrypt build failure
  crypto: vmx - Ignore generated files
  crypto: vmx - Adding support for XTS
  crypto: vmx - Adding asm subroutines for XTS
  crypto: skcipher - add comment for skcipher_alg->base
  crypto: testmgr - Print akcipher algorithm name
  crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
  crypto: nx - off by one bug in nx_of_update_msc()
  crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
  crypto: scatterwalk - Inline start/map/done
  crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
  crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
  crypto: scatterwalk - Fix test in scatterwalk_done
  crypto: api - Optimise away crypto_yield when hard preemption is on
  crypto: scatterwalk - add no-copy support to copychunks
  crypto: scatterwalk - Remove scatterwalk_bytes_sglen
  crypto: omap - Stop using crypto scatterwalk_bytes_sglen
  crypto: skcipher - Remove top-level givcipher interface
  crypto: user - Remove crypto_lookup_skcipher call
  crypto: cts - Convert to skcipher
  ...

KEYS: Use skcipher for big keys

2016-06-24T13:24:58+00:00

This patch replaces use of the obsolete blkcipher with skcipher.

Signed-off-by: Herbert Xu 
Acked-by: David Howells

KEYS: potential uninitialized variable

2016-06-17T03:15:04+00:00

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

 (1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

 (2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

 (3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

	echo 80 >/proc/sys/kernel/keys/root_maxbytes
	keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

	kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
	------------[ cut here ]------------
	kernel BUG at ../mm/slab.c:2821!
	...
	RIP: 0010:[] kfree_debugcheck+0x20/0x25
	RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
	RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
	RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
	RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
	R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
	R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
	...
	Call Trace:
	  kfree+0xde/0x1bc
	  assoc_array_cancel_edit+0x1f/0x36
	  __key_link_end+0x55/0x63
	  key_reject_and_link+0x124/0x155
	  keyctl_reject_key+0xb6/0xe0
	  keyctl_negate_key+0x10/0x12
	  SyS_keyctl+0x9f/0xe7
	  do_syscall_64+0x63/0x13a
	  entry_SYSCALL64_slow_path+0x25/0x25

Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter 
Signed-off-by: David Howells 
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds

KEYS: Strip trailing spaces

2016-06-14T09:29:44+00:00

Strip some trailing spaces.

Signed-off-by: David Howells

KEYS: Add placeholder for KDF usage with DH

2016-06-03T06:14:34+00:00

The values computed during Diffie-Hellman key exchange are often used
in combination with key derivation functions to create cryptographic
keys.  Add a placeholder for a later implementation to configure a
key derivation function that will transform the Diffie-Hellman
result returned by the KEYCTL_DH_COMPUTE command.

[This patch was stripped down from a patch produced by Mat Martineau that
 had a bug in the compat code - so for the moment Stephan's patch simply
 requires that the placeholder argument must be NULL]

Original-signed-off-by: Mat Martineau 
Signed-off-by: Stephan Mueller 
Signed-off-by: David Howells 
Signed-off-by: James Morris

Merge branch 'keys-trust' into keys-next

2016-05-04T16:20:20+00:00

Here's a set of patches that changes how certificates/keys are determined
to be trusted.  That's currently a two-step process:

 (1) Up until recently, when an X.509 certificate was parsed - no matter
     the source - it was judged against the keys in .system_keyring,
     assuming those keys to be trusted if they have KEY_FLAG_TRUSTED set
     upon them.

     This has just been changed such that any key in the .ima_mok keyring,
     if configured, may also be used to judge the trustworthiness of a new
     certificate, whether or not the .ima_mok keyring is meant to be
     consulted for whatever process is being undertaken.

     If a certificate is determined to be trustworthy, KEY_FLAG_TRUSTED
     will be set upon a key it is loaded into (if it is loaded into one),
     no matter what the key is going to be loaded for.

 (2) If an X.509 certificate is loaded into a key, then that key - if
     KEY_FLAG_TRUSTED gets set upon it - can be linked into any keyring
     with KEY_FLAG_TRUSTED_ONLY set upon it.  This was meant to be the
     system keyring only, but has been extended to various IMA keyrings.
     A user can at will link any key marked KEY_FLAG_TRUSTED into any
     keyring marked KEY_FLAG_TRUSTED_ONLY if the relevant permissions masks
     permit it.

These patches change that:

 (1) Trust becomes a matter of consulting the ring of trusted keys supplied
     when the trust is evaluated only.

 (2) Every keyring can be supplied with its own manager function to
     restrict what may be added to that keyring.  This is called whenever a
     key is to be linked into the keyring to guard against a key being
     created in one keyring and then linked across.

     This function is supplied with the keyring and the key type and
     payload[*] of the key being linked in for use in its evaluation.  It
     is permitted to use other data also, such as the contents of other
     keyrings such as the system keyrings.

     [*] The type and payload are supplied instead of a key because as an
         optimisation this function may be called whilst creating a key and
         so may reject the proposed key between preparse and allocation.

 (3) A default manager function is provided that permits keys to be
     restricted to only asymmetric keys that are vouched for by the
     contents of the system keyring.

     A second manager function is provided that just rejects with EPERM.

 (4) A key allocation flag, KEY_ALLOC_BYPASS_RESTRICTION, is made available
     so that the kernel can initialise keyrings with keys that form the
     root of the trust relationship.

 (5) KEY_FLAG_TRUSTED and KEY_FLAG_TRUSTED_ONLY are removed, along with
     key_preparsed_payload::trusted.

This change also makes it possible in future for userspace to create a private
set of trusted keys and then to have it sealed by setting a manager function
where the private set is wholly independent of the kernel's trust
relationships.

Further changes in the set involve extracting certain IMA special keyrings
and making them generally global:

 (*) .system_keyring is renamed to .builtin_trusted_keys and remains read
     only.  It carries only keys built in to the kernel.  It may be where
     UEFI keys should be loaded - though that could better be the new
     secondary keyring (see below) or a separate UEFI keyring.

 (*) An optional secondary system keyring (called .secondary_trusted_keys)
     is added to replace the IMA MOK keyring.

     (*) Keys can be added to the secondary keyring by root if the keys can
         be vouched for by either ring of system keys.

 (*) Module signing and kexec only use .builtin_trusted_keys and do not use
     the new secondary keyring.

 (*) Config option SYSTEM_TRUSTED_KEYS now depends on ASYMMETRIC_KEY_TYPE as
     that's the only type currently permitted on the system keyrings.

 (*) A new config option, IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY,
     is provided to allow keys to be added to IMA keyrings, subject to the
     restriction that such keys are validly signed by a key already in the
     system keyrings.

     If this option is enabled, but secondary keyrings aren't, additions to
     the IMA keyrings will be restricted to signatures verifiable by keys in
     the builtin system keyring only.

Signed-off-by: David Howells

KEYS: Add KEYCTL_DH_COMPUTE command

2016-04-12T18:54:58+00:00

This adds userspace access to Diffie-Hellman computations through a
new keyctl() syscall command to calculate shared secrets or public
keys using input parameters stored in the keyring.

Input key ids are provided in a struct due to the current 5-arg limit
for the keyctl syscall. Only user keys are supported in order to avoid
exposing the content of logon or encrypted keys.

The output is written to the provided buffer, based on the assumption
that the values are only needed in userspace.

Future support for other types of key derivation would involve a new
command, like KEYCTL_ECDH_COMPUTE.

Once Diffie-Hellman support is included in the crypto API, this code
can be converted to use the crypto API to take advantage of possible
hardware acceleration and reduce redundant code.

Signed-off-by: Mat Martineau 
Signed-off-by: David Howells

Security: Keys: Big keys stored encrypted

2016-04-12T18:54:58+00:00

Solved TODO task: big keys saved to shmem file are now stored encrypted.
The encryption key is randomly generated and saved to payload[big_key_data].

Signed-off-by: Kirill Marinushkin 
Signed-off-by: David Howells

KEYS: user_update should use copy of payload made during preparsing

2016-04-12T18:54:58+00:00

The payload preparsing routine for user keys makes a copy of the payload
provided by the caller and stashes it in the key_preparsed_payload struct for
->instantiate() or ->update() to use.  However, ->update() takes another copy
of this to attach to the keyring.  ->update() should be using this directly
and clearing the pointer in the preparse data.

Signed-off-by: David Howells