linux-toradex.git/sound/drivers/Kconfig, branch v4.15

ALSA: seq: Allow the modular sequencer registration

2017-06-12T06:43:33+00:00

Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.

Signed-off-by: Takashi Iwai

ALSA: seq: Reorganize kconfig and build

2017-06-09T20:10:06+00:00

This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.

The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig.  OK, that's easy.

The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module.  The driver that requires such sequencer components select
exclusively the kconfig items.  This is more straightforward and
standard way.

Signed-off-by: Takashi Iwai

ALSA: sound kconfig typo

2013-04-24T12:02:36+00:00

Fix english in sound/drivers/Kconfig.

Signed-off-by: Pavel Machek 
Signed-off-by: Takashi Iwai

ALSA: vx: hard dependency on the standard fw loader

2012-11-22T16:48:01+00:00

Yet again like previous two commits, drop the old hwdep user-space
firmware code from vx driver (snd-vxpocket and snd-vx222).

Signed-off-by: Takashi Iwai

ALSA: sound/drivers: remove CONFIG_EXPERIMENTAL

2012-10-24T22:16:38+00:00

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Signed-off-by: Kees Cook 
Signed-off-by: Takashi Iwai

Documentation: remove references to /etc/modprobe.conf

2012-03-30T23:03:15+00:00

Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi 
Acked-by: Takashi Iwai 
Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Randy Dunlap 
Signed-off-by: Linus Torvalds

Merge branch 'topic/aloop' into topic/misc

2010-08-18T13:17:42+00:00

ALSA: introduce the snd-aloop module for the PCM loopback

2010-08-09T12:21:11+00:00

The snd-aloop module allows redirecting of the PCM playback in the
kernel back to the user space using the standard ALSA PCM capture API.

The module also allows time synchronization with another timing source
and notifications of playback stream parameter changes.

Signed-off-by: Jaroslav Kysela

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

2010-08-08T00:07:31+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...

ALSA: Kconfig: SND_AC97_POWER_SAVE description improvement

2010-07-15T11:43:44+00:00

The description has been expanded to explain the time-out
value provided by the power_save module parameter.

Signed-off-by: Michael Witten 
Signed-off-by: Takashi Iwai