<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/sound/firewire/bebob, branch v5.0</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>ALSA: bebob: fix model-id of unit for Apogee Ensemble</title>
<updated>2018-12-19T13:36:35+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-12-19T11:00:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=644b2e97405b0b74845e1d3c2b4fe4c34858062b'/>
<id>644b2e97405b0b74845e1d3c2b4fe4c34858062b</id>
<content type='text'>
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).

I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:

$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)

When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': True,
                'chip_ID': 21474898341,
                'cmc': True,
                'cyc_clk_acc': 100,
                'generation': 2,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['HARDWARE_VERSION', 19],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 126702],
                      ['DESCRIPTOR', 'Ensemble'],
                      ['VERSION', 5297],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 126702],
                          ['DESCRIPTOR', 'Ensemble']]],
                      [ 'DEPENDENT_INFO',
                        [ ['SPECIFIER_ID', 2037],
                          ['VERSION', 1],
                          [(58, 'IMMEDIATE'), 16777159],
                          [(59, 'IMMEDIATE'), 1048576],
                          [(60, 'IMMEDIATE'), 16777159],
                          [(61, 'IMMEDIATE'), 6291456]]]]}

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).

I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:

$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)

When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': True,
                'chip_ID': 21474898341,
                'cmc': True,
                'cyc_clk_acc': 100,
                'generation': 2,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['HARDWARE_VERSION', 19],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 126702],
                      ['DESCRIPTOR', 'Ensemble'],
                      ['VERSION', 5297],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 126702],
                          ['DESCRIPTOR', 'Ensemble']]],
                      [ 'DEPENDENT_INFO',
                        [ ['SPECIFIER_ID', 2037],
                          ['VERSION', 1],
                          [(58, 'IMMEDIATE'), 16777159],
                          [(59, 'IMMEDIATE'), 1048576],
                          [(60, 'IMMEDIATE'), 16777159],
                          [(61, 'IMMEDIATE'), 6291456]]]]}

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: firewire: simplify cleanup process when failing to register sound card</title>
<updated>2018-10-10T10:11:50+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-10T06:35:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3babca4555b20fc80aff4776662fb237257d9afd'/>
<id>3babca4555b20fc80aff4776662fb237257d9afd</id>
<content type='text'>
In former commits, .private_free callback releases resources just for
data transmission. This release function can be called without the
resources are actually allocated in error paths.

This commit applies a small refactoring to clean up codes in error
paths.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In former commits, .private_free callback releases resources just for
data transmission. This release function can be called without the
resources are actually allocated in error paths.

This commit applies a small refactoring to clean up codes in error
paths.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: bebob/fireworks: simplify handling of local device entry table</title>
<updated>2018-10-10T10:11:47+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-10T06:35:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=873608dc6b5da7a2571419bfa10e0d088d39cee0'/>
<id>873608dc6b5da7a2571419bfa10e0d088d39cee0</id>
<content type='text'>
In drivers of ALSA firewire stack, bebob and fireworks drivers have
local device entry table. At present, critical section to operate the
table is from the beginning/end of 'do_registration' call. This can be
more narrow and simplify codes.

This commit applies small refactoring for the above purpose.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In drivers of ALSA firewire stack, bebob and fireworks drivers have
local device entry table. At present, critical section to operate the
table is from the beginning/end of 'do_registration' call. This can be
more narrow and simplify codes.

This commit applies small refactoring for the above purpose.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver</title>
<updated>2018-10-10T10:11:41+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-10T06:35:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5b14ec25a79bf60fc9a663fe579a500b6ac9d8ab'/>
<id>5b14ec25a79bf60fc9a663fe579a500b6ac9d8ab</id>
<content type='text'>
In a previous commit, drivers in ALSA firewire stack blocks .remove
callback of bus driver. This enables to release members of private
data in the callback after releasing device of sound card.

This commit simplifies codes to release the members.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In a previous commit, drivers in ALSA firewire stack blocks .remove
callback of bus driver. This enables to release members of private
data in the callback after releasing device of sound card.

This commit simplifies codes to release the members.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released</title>
<updated>2018-10-10T10:11:34+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-10T06:34:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=61ccc6f6b27c03bb32ca38a3c580d49ce1612d43'/>
<id>61ccc6f6b27c03bb32ca38a3c580d49ce1612d43</id>
<content type='text'>
At present, in .remove callback of bus driver just decrease reference
count of device for ALSA card instance. This delegates release of the
device to a process in which the last of ALSA character device is
released.

On the other hand, the other drivers such as for devices on PCIe are
programmed to block .remove callback of bus driver till all of ALSA
character devices are released.

For consistency of behaviour for whole drivers, this probably confuses
users. This commit takes drivers in ALSA firewire stack to imitate the
above behaviour.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
At present, in .remove callback of bus driver just decrease reference
count of device for ALSA card instance. This delegates release of the
device to a process in which the last of ALSA character device is
released.

On the other hand, the other drivers such as for devices on PCIe are
programmed to block .remove callback of bus driver till all of ALSA
character devices are released.

For consistency of behaviour for whole drivers, this probably confuses
users. This commit takes drivers in ALSA firewire stack to imitate the
above behaviour.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: bebob: use managed-resource to maintain data specific to M-Audio FW-1814/ProjectMix I/O</title>
<updated>2018-10-04T05:54:05+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-02T23:21:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a3aaf7d2bd388caea2bd0fba266b815ac708c49d'/>
<id>a3aaf7d2bd388caea2bd0fba266b815ac708c49d</id>
<content type='text'>
ALSA bebob driver allocates memory object for data specific to M-Audio
FW-1884/ProjectMix I/O. The object is to maintain format of isochronous
packet payload for packet streaming by components for ALSA rawMIDI/PCM
interfaces. The object can be released as managed-resource of
'struct snd_card.card_dev'.

This commit uses managed-resource of the sound card device for this
purpose.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
ALSA bebob driver allocates memory object for data specific to M-Audio
FW-1884/ProjectMix I/O. The object is to maintain format of isochronous
packet payload for packet streaming by components for ALSA rawMIDI/PCM
interfaces. The object can be released as managed-resource of
'struct snd_card.card_dev'.

This commit uses managed-resource of the sound card device for this
purpose.

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: firewire: use managed-resource of fw unit device for private data</title>
<updated>2018-10-04T05:54:01+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-10-02T23:21:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=366a20d7a75cff7f89dede6fdfd41bd491aaf8ac'/>
<id>366a20d7a75cff7f89dede6fdfd41bd491aaf8ac</id>
<content type='text'>
At present, private data of each driver in ALSA firewire stack is
allocated/freed by kernel slab allocator for corresponding unit on
IEEE 1394 bus. In this case, resource-managed slab allocator is
available to release memory object automatically just before releasing
device structure for the unit. This idea can prevent runtime from
memory leak due to programming mistakes.

This commit uses the allocator for the private data. These drivers
already use reference counter to maintain lifetime of device structure
for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data
is safely released in a callback of 'struct snd_card.private_free().

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
At present, private data of each driver in ALSA firewire stack is
allocated/freed by kernel slab allocator for corresponding unit on
IEEE 1394 bus. In this case, resource-managed slab allocator is
available to release memory object automatically just before releasing
device structure for the unit. This idea can prevent runtime from
memory leak due to programming mistakes.

This commit uses the allocator for the private data. These drivers
already use reference counter to maintain lifetime of device structure
for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data
is safely released in a callback of 'struct snd_card.private_free().

Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path</title>
<updated>2018-09-17T11:36:54+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-09-17T08:25:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b1fbebd4164b3d170ad916dcd692cf843c9c065d'/>
<id>b1fbebd4164b3d170ad916dcd692cf843c9c065d</id>
<content type='text'>
After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.

This commit releases the allocated data at the error path.

Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: &lt;stable@vger.kernel.org&gt; # v4.7+
Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.

This commit releases the allocated data at the error path.

Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: &lt;stable@vger.kernel.org&gt; # v4.7+
Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping</title>
<updated>2018-09-10T07:07:29+00:00</updated>
<author>
<name>Takashi Sakamoto</name>
<email>o-takashi@sakamocchi.jp</email>
</author>
<published>2018-09-09T13:25:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=493626f2d87a74e6dbea1686499ed6e7e600484e'/>
<id>493626f2d87a74e6dbea1686499ed6e7e600484e</id>
<content type='text'>
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST',
an address of 'payload' argument is used for streaming DMA mapping by
'firewire_ohci' module if 'size' argument is larger than 8 byte.
Although in this case the address should not be on kernel stack, current
implementation of ALSA bebob driver uses data in kernel stack for a cue
to boot M-Audio devices. This often brings unexpected result, especially
for a case of CONFIG_VMAP_STACK=y.

This commit fixes the bug.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021
Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165
Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series')
Cc: &lt;stable@vger.kernel.org&gt; # v3.16+
Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST',
an address of 'payload' argument is used for streaming DMA mapping by
'firewire_ohci' module if 'size' argument is larger than 8 byte.
Although in this case the address should not be on kernel stack, current
implementation of ALSA bebob driver uses data in kernel stack for a cue
to boot M-Audio devices. This often brings unexpected result, especially
for a case of CONFIG_VMAP_STACK=y.

This commit fixes the bug.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021
Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165
Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series')
Cc: &lt;stable@vger.kernel.org&gt; # v3.16+
Signed-off-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()</title>
<updated>2018-07-18T06:24:29+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2018-07-18T05:40:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=fa84cf094ef9667e2b91c104b0a788fd1896f482'/>
<id>fa84cf094ef9667e2b91c104b0a788fd1896f482</id>
<content type='text'>
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with
somewhat special for vmalloc handling, but in the end, this turned to
just the default handler, i.e. NULL.  As the situation has never
changed over decades, let's rip it off.

Reviewed-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with
somewhat special for vmalloc handling, but in the end, this turned to
just the default handler, i.e. NULL.  As the situation has never
changed over decades, let's rip it off.

Reviewed-by: Takashi Sakamoto &lt;o-takashi@sakamocchi.jp&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
</feed>
