linux-toradex.git/sound/firewire/fireface, branch v4.17

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro 
Signed-off-by: Linus Torvalds

sound: annotate ->poll() instances

2017-11-27T21:20:02+00:00

Signed-off-by: Al Viro

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:01:08+00:00

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland 
Signed-off-by: Paul E. McKenney 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar

ALSA: fireface: Use common error handling code in pcm_open()

2017-08-23T13:52:44+00:00

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring 
Reviewed-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: firewire: add const qualifier to identifiers for read-only symbols

2017-08-22T14:08:00+00:00

Drivers in ALSA firewire stack still includes some symbols which can be
moved to a section for read-only symbols.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: firewire: arrange common PCM info/constraints for AMDTP engine applications

2017-06-08T07:15:44+00:00

In ALSA firewire stack, 8 drivers uses IEC 61883-1/6 engine for data
transmission. They have common PCM info/constraints and duplicated codes.

This commit unifies the codes into fireiwre-lib.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: fireface: constify ALSA specific operations

2017-06-07T05:55:15+00:00

ALSA fireface driver has ALSA specific operations for MIDI/PCM data.
Structured data for the operations can be constified. Additionally,
The structured data can be function local.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: firewire: process packets in 'struct snd_pcm_ops.ack' callback

2017-06-07T05:53:32+00:00

In recent commit for ALSA PCM core, some arrangement is done for
'struct snd_pcm_ops.ack' callback. This is called when appl_ptr is
explicitly moved in intermediate buffer for PCM frames, except for
some cases described later.

For drivers in ALSA firewire stack, usage of this callback has a merit to
reduce latency between time of PCM frame queueing and handling actual
packets in recent isochronous cycle, because no need to wait for software
IRQ context from isochronous context of OHCI 1394.

If this works well in a case that mapped page frame is used for the
intermediate buffer, user process should execute some commands for ioctl(2)
to tell the number of handled PCM frames in the intermediate buffer just
after handling them. Therefore, at present, with a combination of below
conditions, this doesn't work as expected and user process should wait for
the software IRQ context as usual:
 - when ALSA PCM core judges page frame mapping is available for status
   data (struct snd_pcm_mmap_status) and control data
   (struct snd_pcm_mmap_control).
 - user process handles PCM frames by loop just with 'snd_pcm_mmap_begin()'
   and 'snd_pcm_mmap_commit()'.
 - user process uses PCM hw plugin in alsa-lib to operate I/O without
   'sync_ptr_ioctl' option.

Unfortunately, major use case include these three conditions.

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: fireface: obsolete usage of ktime_set() for zero assignment

2017-04-20T13:00:54+00:00

In development period for Linux v4.10, ktime_t became an alias of s64,
instead of union. I forgot it. We can just assign zero, instead of usage
of ktime_set(0, 0).

Fixes: 19174295788 ("ALSA: fireface: add transaction support")
Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai

ALSA: fireface: add support for Fireface 400

2017-04-05T19:31:54+00:00

Fireface 400 is a second model of RME Fireface series, released in 2006.
This commit adds support for this model.

This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT
channels in both of tx/rx packet. The number of ADAT channels differs
depending on each mode of sampling transmission frequency.

$ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04107768  bus_info_length 4, crc_length 16, crc 30568 (should be 61311)
404  31333934  bus_name "1394"
408  20009002  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024)
40c  000a3501  company_id 000a35     |
410  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

               root directory
               -----------------------------------------------------------------
414  000485ec  directory_length 4, crc 34284
418  03000a35  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  000314c4  directory_length 3, crc 5316
42c  12000a35  specifier id
430  13000002  version
434  17101800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000261a8  leaf_length 2, crc 25000
43c  000a3501  company_id 000a35     |
440  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

Signed-off-by: Takashi Sakamoto 
Signed-off-by: Takashi Iwai