linux-toradex.git/sound/isa/wss, branch v3.4.45

sound: Add module.h to the previously silent sound users

2011-10-31T23:31:21+00:00

Lots of sound drivers were getting module.h via the implicit presence
of it in  but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker

sound: irq: Remove IRQF_DISABLED

2011-09-22T09:19:20+00:00

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang 
Acked-by: Peter Ujfalusi 
Acked-by: Mark Brown 
Signed-off-by: Takashi Iwai

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

ALSA: opti93x: move controls definitions to opti93x driver

2009-12-11T13:43:16+00:00

Move OPTi93x controls definitions to the opti93x driver
from the common wss-lib library module. These controls
are used only by the opti93x driver.

Also, fix capture source names. They are the same as
opl3sa2 names.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai

ALSA: cs4236: update control names

2009-11-18T06:23:16+00:00

Update control names to be more closer to their meaning.
Change the "Mono" name to the "Beep" as this line is usually
used to forward the PC beeper signal to sound card's output.
Update names for both cs423x and wss.

Clean up cs4235 controls according to the cs4235 doc. Rename
some of the cs4235 controls to be consistent with the cs4236's
ones.

Also, delete one misnamed cs4231 register define.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai

ALSA: cs4236: detect chip in one pass

2009-11-05T17:10:25+00:00

The cs4236 was two step detection with call to the snd_wss_free()
between two steps. The snd_wss_free() did not free a sound device
created in the snd_wss_create(). This caused an OOPS during module
removal as the same sound device was released twice. The same OOPS
happened if the cs4236 module loading failed.

Fix this by adapting the snd_cs4236_create() to correctly work with
chips less capable then cs4236. The snd_cs4236_create() behaves the
same as the snd_wss_create() if the chip is less capable than the cs4236.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai

ALSA: wss: reuse CS4231 controls for AD1848

2009-10-11T16:02:58+00:00

The C4231 control set is a superset of the AD1848 control
set so reuse the CS4231 controls definitions for the AD1848.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai

ALSA: wss: convert CS4231 mixer to dB scale

2009-10-10T08:55:10+00:00

Convert CS4231 mixer to dB scale after AD1848 mixer.

Also, add missing microphone boost control for the AD1848
and correct wrong bits for loopback volume on the AD1848.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai

Merge branch 'topic/sscape-fix' into for-linus

2009-03-23T23:36:21+00:00

ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection

2009-02-16T22:05:25+00:00

cs4232 and cs4236 driver merge to solve PnP BIOS detection.

Also, the patch adds recognition if the chip is cs4236b+
or earlier part. This unifies drivers for both cs4232
and cs4236+ chips. It allows to use the PnP BIOS
detection for the cs4236+ chips. Previously, only
the snd-cs4232 could be detected by the PnP BIOS.

The cs4232+ cards reports two separate PnP BIOS ids.

The patch adds search for the second id to find out
resources assigned to a control port.

Signed-off-by: Krzysztof Helt 
Signed-off-by: Takashi Iwai