linux-toradex.git/sound/pci/echoaudio, branch v3.4.45

ALSA: echoaudio: Remove incorrect part of assertion

2012-05-06T10:54:20+00:00

This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.

The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit dd7b254d.

ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)

Signed-off-by: Mark Hills 
Cc: 
Signed-off-by: Takashi Iwai

ALSA: module_param: make bool parameters really bool

2011-12-19T09:34:41+00:00

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell 
Signed-off-by: Takashi Iwai

sound: Add module.h to the previously silent sound users

2011-10-31T23:31:21+00:00

Lots of sound drivers were getting module.h via the implicit presence
of it in  but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker

sound: fix drivers needing module.h not moduleparam.h

2011-10-31T23:31:19+00:00

The implicit presence of module.h lured several users into
incorrectly thinking that they only needed/used modparam.h
but once we clean up the module.h presence, these will show
up as build failures, so fix 'em now.

Signed-off-by: Paul Gortmaker

atomic: use

2011-07-26T23:49:47+00:00

This allows us to move duplicated code in 
(atomic_inc_not_zero() for now) to 

Signed-off-by: Arun Sharma 
Reviewed-by: Eric Dumazet 
Cc: Ingo Molnar 
Cc: David Miller 
Cc: Eric Dumazet 
Acked-by: Mike Frysinger 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*

2011-06-10T14:36:37+00:00

The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai

ALSA: Use KBUILD_MODNAME for pci_driver.name entries

2011-06-10T14:20:20+00:00

The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai

ALSA: echoaudio: check kmalloc() result

2010-07-19T15:59:04+00:00

If kmalloc() fails exit with -ENOMEM.

Signed-off-by: Kulikov Vasiliy 
Ack-by: Giuliano Pochini 
Signed-off-by: Takashi Iwai

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

2010-04-07T15:42:25+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: mixart: range checking proc file
  ALSA: hda - Fix a wrong array range check in patch_realtek.c
  ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
  ALSA: hda - Enable amplifiers on Acer Inspire 6530G
  ASoC: Only do WM8994 bias off transition from standby
  ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices
  ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction
  ASoC: Support second DC servo readback method for wm_hubs
  ASoC: Avoid wraparound in wm_hubs DC servo correction
  ALSA: echoaudio - Eliminate use after free
  ALSA: i2c: cleanup: change parameter to pointer
  ALSA: hda - Add MSI blacklist for Aopen MZ915-M
  ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code
  ALSA: hda - Update document about MSI and interrupts
  ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981
  ALSA: hda - Add missing printk argument in previous patch
  ASoC: Fix passing platform_data to ac97 bus users and fix a leak
  ALSA: hda - Fix ADC/MUX assignment of ALC269 codec
  ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo()
  ASoC: wm8994: playback => capture

ALSA: echoaudio - Eliminate use after free

2010-04-04T10:21:42+00:00

Use the call to snd_card_free in the error handling code at the end of the
function, as in the other error cases.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// 
@@
expression E,E2;
@@

snd_card_free(E)
...
(
  E = E2
|
* E
)
// 

Signed-off-by: Julia Lawall 
Signed-off-by: Takashi Iwai