Chancel Liu <chancel.liu@nxp.com> says:

The existing cs42xx8 driver only supported I2C control interface.
Add SPI bus support for the Cirrus Logic CS42448/CS42888 Audio CODEC.

Link: https://patch.msgid.link/20260603095041.3906558-1-chancel.liu@oss.nxp.com

The existing cs42xx8 driver only supported I2C control interface.
Add SPI bus support for the Cirrus Logic CS42448/CS42888 Audio CODEC.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260603095041.3906558-3-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

This is the codec driver for es9356-sdca.

Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20260514075206.3483-4-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add codec driver for tac5xx2 family of devices.
This includes the support for
  1. tac5572 - DAC, PDM, UAJ and HID
  2. tas2883 - Amplifier with DSP
  3. tac5672 - Similar to tac5572 with feedback
  4. tac5682 - Similar to tac5672 with Amplifier DSP.

Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-3-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The TAS675x (TAS6754, TAS67524) are quad-channel, digital-input
Class-D amplifiers with an integrated DSP, controlled over I2C.
They support I2S and TDM serial audio interfaces.

Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260416232640.3084132-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add KUnit testing of the wm_adsp code that searches for firmware files.
Also make the SND_SOC_WM_ADSP Kconfig symbol visible if KUNIT is enabled
so that wm_adsp can be manually included for KUnit testing.

The firmware filename is composed of several fields, some of which are
optional, and there is a search algorithm to fallback from specific to
generic versions of firmware for a device. This KUnit test verifies that
wm_adsp is searching for the correct sequence of filenames.

The are two ways of testing this, and both are used in this KUnit test.

1. Trap the calls to firmware_request_nowarn() and test that the sequence
   of filenames request is correct.

   This is the most thorough test because it proves that exactly the
   expected filenames are requested, in the correct order.

   But it doesn't fully cover regression testing. If a change to the search
   algorithm changes the expected sequence of requested files, the test
   must also be changed to expect that new sequence. If the expectation is
   wrong, the tests can pass (because the search order is as expected)
   while picking a different file in some cases from what it did before the
   change.

2. Test which file is picked from a simulated directory of files.

   This is better for regression testing because it is independent of the
   search algorithm. It does not need to change if the search algorithm
   changes. It is not testing exactly which files the algorithm searches
   for, only which file it eventually picks from a given set of available
   files.

   In other words, the regression test is: does it still pick the same file
   from the same directory of files?

   But it is impractical for thorough testing. It doesn't prove that
   exactly the correct files were searched for, unless it was to test with
   every possible combination of file names and directory content that
   could ever exist. Clearly this is impossible to implement, since the
   number of combations of possible valid filenames in a directory and
   number of files in a directory is astronomically large.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260310141817.1871794-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add KUnit testing of:
 cs35l56_check_and_save_onchip_spkid_gpios()
 cs35l56_configure_onchip_spkid_pads()
 cs35l56_read_onchip_spkid()

The test consists of:

- A mock regmap that simulates the pad and pin config registers.

- Parameterization of the pin list, pulls list, a simulated value for
  each pin and the speaker ID value that this should produce.

- A self-test of the simulated pin and GPIO registers.

- A test that the value returned by cs35l56_read_onchip_spkid() is
  correct.

- A test that the pin pull-up/down are set correctly by
  cs35l56_configure_onchip_spkid_pads()

- A test that cs35l56_configure_onchip_spkid_pads() and
  cs35l56_read_onchip_spkid(0 return the expected values if
  cs35l56_base->num_onchip_spkid_gpios == 0.

- A test that cs35l56_check_and_save_onchip_spkid_gpios() saves
  the configuration.

- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
  illegal GPIO numbers.

- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
  illegal pull types.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:

The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.

Since commit d6df7df7ae5a0 ("ARM: pxa: remove unused board files"), there
has been no in-tree user of the AK4641 codec driver. The last user
(HP iPAQ hx4700) was a non-DT PXA board file that instantiated the device
via I2C board data; that code was removed as part of the PXA board-file
purge.

The AK4641 driver was introduced ~2011 and still probes only via the I2C
device-ID table ('.id_table'), without an 'of_match_table', so there are
no upstream Devicetree users to retain. With no in-tree users left, remove
the driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260122-sound-cleanup-v1-1-0a91901609b8@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a new KUnit test for testing the creation of firmware name
qualifiers in the cs35l56 driver. The initial set of test cases
are for cs35l56_set_fw_suffix().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>