linux-toradex.git/sound/soc/codecs/cs47l24.c, branch v4.19

ASoC: wm_adsp: Declare firmware controls from codec driver

2018-08-08T16:31:48+00:00

To allow for more flexibility in naming of DSP-type cores
move the creation of the firmware controls to the codec
drivers instead of having a hardcoded list in wm_adsp.

Signed-off-by: Richard Fitzgerald 
Signed-off-by: Mark Brown

ASoC: arizona: Set compressed IRQ to a wake source

2018-06-20T11:18:44+00:00

The current code is not setting the compressed IRQ as a wake
source.  Normally this doesn't cause any issues as the CODEC
IRQ is set as a wake source by the jack detection code and the
CODEC only produces a single IRQ line. However if the system
is not using jack detection the compressed audio IRQ should
still function as a wake source, as such directly set the
compressed audio IRQ as a wake source.

Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: arizona: Fixup some minor formatting issues

2018-02-21T11:20:33+00:00

Repair any formatting/style issues that can be fixed without major
code refactoring.

Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: arizona: replace codec to component

2018-02-14T10:44:19+00:00

Now we can replace Codec to Component. Let's do it.

Because there are many drivers which are using arizona,
we need to update these all related drivers in same time.
Otherwise compile error/warning happen

Note:

cs47l24
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

wm5102
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

wm5110
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

wm8997
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

wm8998
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

Signed-off-by: Kuninori Morimoto 
Tested-by: Charles Keepax 
Acked-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: cs47l24: replace platform to component

2018-02-12T11:45:18+00:00

Now platform can be replaced to component, let's do it.
This patch merges cs47l24_compr_platform into soc_codec_dev_cs47l24

Signed-off-by: Kuninori Morimoto 
Acked-by: Charles Keepax 
Tested-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: use snd_soc_component_init_regmap() on cs47l24

2017-12-04T17:39:17+00:00

To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and
.get_regmap. But these are duplicated feature.
Let's use snd_soc_component_init_regmap() and remove .get_regmap

Signed-off-by: Kuninori Morimoto 
Signed-off-by: Mark Brown

ASoC: arizona: Add support for setting the output volume limits

2017-09-20T16:34:35+00:00

The output volume limits allow signals to be limited to specific levels
appropriate for the hardware attached. As this is a property of the
hardware itself these will be configured through device tree.

Signed-off-by: Charles Keepax 
Acked-by: Lee Jones 
Signed-off-by: Mark Brown

ASoC: arizona: Add handling for audio related device tree entries

2017-09-19T14:57:59+00:00

Currently all the audio related device tree entries are handled by the
MFD code, for most parts of the Arizona driver we group the device
tree handling with the component that uses it and should do so here as
well.

Add handling in the ASoC code for the audio device tree entries, a
later patch removes the MFD side handling but there is no harm in it
being duplicated temporarily.

Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: arizona: Add new common Arizona init function

2017-09-19T14:57:56+00:00

Currently the driver has quite a few small initialisation functions, in
preparation for some refactoring add a new function arizona_init_common.
This will be used bus probe level initialisation that is common across
Arizona devices. For now just move the notifier chain initialisation in
there.

Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown

Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x' and 'asoc/topic/bcm' into asoc-next

2017-09-01T11:12:21+00:00