linux-toradex.git/sound/soc/codecs, branch v4.19

Merge tag 'asoc-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2018-09-17T16:59:21+00:00

ASoC: Fixes for v4.19

This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix.  There's not a huge amount
that stands out here relative to anything else.

ASoC: cs4265: fix MMTLR Data switch control

2018-09-10T14:49:02+00:00

The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0
and not at address 0x0 bit 1. Fix this.

Signed-off-by: Sébastien Szymanski 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org

ASoC: tas6424: Save last fault register even when clear

2018-08-31T15:23:25+00:00

When there is no fault bit set in a fault register we skip the fault
reporting section for that register. This also skips over saving that
registers value. We save the value so we will not double report an
error, but if an error clears then returns we will also not report it
as we did not save the all cleared register value. Fix this by saving
the fault register value in the all clear path.

Signed-off-by: Andrew F. Davis 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org

ASoC: sigmadsp: safeload should not have lower byte limit

2018-08-28T19:19:20+00:00

Fixed range in safeload conditional to allow safeload to up to 20 bytes,
without a lower limit.

Signed-off-by: Danny Smith 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown

ASoC: wm8804: Add ACPI support

2018-08-28T19:11:37+00:00

HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier.

This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform.

The scripts at https://github.com/thesofproject/acpi-scripts can be
used to add the ACPI initrd overlays.

Signed-off-by: Pierre-Louis Bossart 
Acked-by: Charles Keepax 
Signed-off-by: Mark Brown

ASoC: rt5682: Change DAC/ADC volume scale

2018-08-28T19:02:13+00:00

The step of DAC/ADC volume scale changes from 0.375dB to 0.75dB

Signed-off-by: Shuming Fan 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org

ASoC: max98373: Added 10ms sleep after amp software reset

2018-08-28T19:02:01+00:00

Signed-off-by: Ryan Lee 
Signed-off-by: Mark Brown

ASoC: rt5514: Fix the issue of the delay volume applied again

2018-08-16T11:10:43+00:00

After our evaluation, we need to modify the default values to make sure
the volume applied immediately.

Signed-off-by: Oder Chiou 
Signed-off-by: Mark Brown

ASoC: max98373: Added speaker FS gain cotnrol register to volatile.

2018-08-16T11:09:58+00:00

Signed-off-by: Ryan Lee 
Signed-off-by: Mark Brown

ASoC: wm9712: fix replace codec to component

2018-08-14T14:07:04+00:00

Since commit 143b44845d87 ("ASoC: wm9712: replace codec to component")
"wm9712-codec" got renamed to "wm9712-component", however, this change
never got propagated down to the actual board/platform drivers. E.g. on
Colibri T20 this lead to the following spew upon boot with sound/touch
being broken:

[    2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[    2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[    2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[    2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[    2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[    2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[    3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[    3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[    3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[    3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[   14.970443] ALSA device list:
[   14.996628]   No soundcards found.

This commit finally fixes this again.

Signed-off-by: Marcel Ziswiler 
Acked-by: Charles Keepax 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org