linux-toradex.git/sound/soc/codecs, branch v4.4.151

ASoC: ssm2602: Replace reg_default_raw with reg_default

2018-04-24T07:32:07+00:00

commit a01df75ce737951ad13a08d101306e88c3f57cb2 upstream.

SSM2602 driver is broken on recent kernels (at least
since 4.9). User space applications such as amixer or
alsamixer get EIO when attempting to access codec
controls via the relevant IOCTLs.

Root cause of these failures is the regcache_hw_init
function in drivers/base/regmap/regcache.c, which
prevents regmap cache initalization from the
reg_defaults_raw element of the regmap_config structure
when registers are write only. It also disables the
regmap cache entirely when all registers are write only
or volatile as is the case for the SSM2602 driver.

Using the reg_defaults element of the regmap_config
structure rather than the reg_defaults_raw element to
initalize the regmap cache avoids the logic in the
regcache_hw_init function entirely. It also makes this
driver consistent with other ASoC codec drivers, as
this driver was the ONLY codec driver that used the
reg_defaults_raw element to initalize the cache.

Tested on Digilent Zybo Z7 development board which has
a SSM2603 codec chip connected to a Xilinx Zynq SoC.

Signed-off-by: James Kelly 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

2018-02-16T19:09:36+00:00

commit 0cab20cec0b663b7be8e2be5998d5a4113647f86 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: twl4030: fix child-node lookup

2018-01-02T19:33:22+00:00

commit 15f8c5f2415bfac73f33a14bcd83422bcbfb5298 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent codec node was also prematurely freed,
while the child node was leaked.

Fixes: 2d6d649a2e0f ("ASoC: twl4030: Support for DT booted kernel")
Signed-off-by: Johan Hovold 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data

2017-11-30T08:37:28+00:00

[ Upstream commit 1cab2a84f470e15ecc8e5143bfe9398c6e888032 ]

Protect against corrupt firmware files by ensuring that the length we
get for the data in a region actually lies within the available firmware
file data buffer.

Signed-off-by: Richard Fitzgerald 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: adau17x1: Workaround for noise bug in ADC

2017-11-08T09:06:27+00:00

commit 1e6f4fc06f6411adf98bbbe7fcd79442cd2b2a75 upstream.

The ADC in the ADAU1361 (and possibly other Analog Devices codecs)
exhibits a cyclic variation in the noise floor (in our test setup between
-87 and -93 dB), a new value being attained within this range whenever a
new capture stream is started. The cycle repeats after about 10 or 11
restarts.

The workaround recommended by the manufacturer is to toggle the ADOSR bit
in the Converter Control 0 register each time a new capture stream is
started.

I have verified that the patch fixes this problem on the ADAU1361, and
according to the manufacturer toggling the bit in question in this manner
will at least have no detrimental effect on other chips served by this
driver.

Signed-off-by: Ricard Wanderlof 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL

2017-08-07T02:19:45+00:00

[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ]

The clk_ref_div is not configured in the correct position of the
register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned
the wrong value.

Signed-off-by: John Hsu 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: tlv320aic3x: Mark the RESET register as volatile

2017-08-07T02:19:44+00:00

[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ]

The RESET register only have one self clearing bit and it should not be
cached. If it is cached, when we sync the registers back to the chip we
will initiate a software reset as well, which is not desirable.

Signed-off-by: Peter Ujfalusi 
Reviewed-by: Jarkko Nikula 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: cs4270: fix DAPM stream name mismatch

2016-11-18T09:48:34+00:00

commit aa5f920993bda2095952177eea79bc8e58ae6065 upstream.

Mismatching stream names in DAPM route and widget definitions are
causing compilation errors. Fixing these names allows the cs4270
driver to compile and function.

[Errors must be at probe time not compile time -- broonie]

Signed-off-by: Murray Foster 
Acked-by: Paul Handrigan 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: ak4642: Enable cache usage to fix crashes on resume

2016-06-08T01:14:32+00:00

commit d3030d11961a8c103cf07aed59905276ddfc06c2 upstream.

The ak4642 driver is using a regmap cache sync to restore the
configuration of the chip on resume but (as Peter observed) does not
actually define a register cache which means that the resume is never
going to work and we trigger asserts in regmap.  Fix this by enabling
caching.

Reported-by: Geert Uytterhoeven 
Reported-by: Peter Ujfalusi 
Tested-by: Geert Uytterhoeven 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: rt5640: Correct the digital interface data select

2016-05-04T21:48:48+00:00

commit 653aa4645244042826f105aab1be3d01b3d493ca upstream.

this patch corrects the interface adc/dac control register definition
according to datasheet.

Signed-off-by: Sugar Zhang 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman