linux-toradex.git/sound/soc, branch v3.0.89

ASoC: max98088 - fix element type of the register cache.

2013-08-04T07:43:30+00:00

commit cb6f66a2d278e57a6c9d8fb59bd9ebd8ab3965c2 upstream.

The registers of max98088 are 8 bits, not 16 bits. This bug causes the
contents of registers to be overwritten with bad values when the codec
is suspended and then resumed.

Signed-off-by: Chih-Chung Chang 
Signed-off-by: Dylan Reid 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

2013-07-28T23:18:25+00:00

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

Reported-by: Oskar Schirmer 
Signed-off-by: Fabio Estevam 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm8994: missing break in wm8994_aif3_hw_params()

2013-05-19T17:04:36+00:00

commit 4495e46fe18f198366961bb2b324a694ef8a9b44 upstream.

The missing break here means that we always return early and the
function is a no-op.

Signed-off-by: Dan Carpenter 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: max98088: Fix logging of hardware revision.

2013-05-08T02:57:25+00:00

commit 98682063549bedd6e2d2b6b7222f150c6fbce68c upstream.

The hardware revision of the codec is based at 0x40.  Subtract that
before convering to ASCII.  The same as it is done for 98095.

Signed-off-by: Dylan Reid 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running

2013-04-17T04:02:30+00:00

commit f1ca493b0b5e8f42d3b2dc8877860db2983f47b6 upstream.

The Charge Pump needs the DSP clock to work properly, without it the
bypass to HP/LINEOUT is not working properly. This requirement is not
mentioned in the datasheet but has been confirmed by Mark Brown from
Wolfson.

Signed-off-by: Alban Bedel 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: dma-sh7760: Fix compile error

2013-04-12T16:18:08+00:00

commit 417a1178f1bf3cdc606376b3ded3a22489fbb3eb upstream.

The dma-sh7760 currently fails with the following compile error:
	sound/soc/sh/dma-sh7760.c:346:2: error: unknown field 'pcm_ops' specified in initializer
	sound/soc/sh/dma-sh7760.c:346:2: warning: initialization from incompatible pointer type
	sound/soc/sh/dma-sh7760.c:347:2: error: unknown field 'pcm_new' specified in initializer
	sound/soc/sh/dma-sh7760.c:347:2: warning: initialization makes integer from pointer without a cast
	sound/soc/sh/dma-sh7760.c:348:2: error: unknown field 'pcm_free' specified in initializer
	sound/soc/sh/dma-sh7760.c:348:2: warning: initialization from incompatible pointer type
	sound/soc/sh/dma-sh7760.c: In function 'sh7760_soc_platform_probe':
	sound/soc/sh/dma-sh7760.c:353:2: warning: passing argument 2 of 'snd_soc_register_platform' from incompatible pointer type
	include/sound/soc.h:368:5: note: expected 'struct snd_soc_platform_driver *' but argument is of type 'struct snd_soc_platform *'

This is due the misnaming of the snd_soc_platform_driver type name and 'ops'
field. The issue was introduced in commit f0fba2a("ASoC: multi-component - ASoC
Multi-Component Support").

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm2000: Fix sense of speech clarity enable

2013-01-17T16:44:04+00:00

commit 267f8fa2e1eef0612b2007e1f1846bcbc35cc1fa upstream.

Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: dapm: Use card_list during DAPM shutdown

2012-11-26T19:34:34+00:00

commit 445632ad6dda42f4d3f9df2569a852ca0d4ea608 upstream.

DAPM shutdown incorrectly uses "list" field of codec struct while
iterating over probed components (codec_dev_list). "list" field
refers to codecs registered in the system, "card_list" field is
used for probed components.

Signed-off-by: Misael Lopez Cruz 
Signed-off-by: Liam Girdwood 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm8978: pll incorrectly configured when codec is master

2012-11-26T19:34:34+00:00

commit 55c6f4cb6ef49afbb86222c6a3ff85329199c729 upstream.

When MCLK is supplied externally and BCLK and LRC are configured as outputs
(codec is master), the PLL values are only calculated correctly on the first
transmission.  On subsequent transmissions, at differenct sample rates, the
wrong PLL values are used.  Test for f_opclk instead of f_pllout to determine
if the PLL values are needed.

Signed-off-by: Eric Millbrandt 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: wm9712: Fix name of Capture Switch

2012-10-12T20:28:10+00:00

commit 689185b78ba6fbe0042f662a468b5565909dff7a upstream.

Help UIs associate it with the matching gain control.

Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman