linux-toradex.git/sound/soc, branch v3.2.47

ASoC: wm8994: missing break in wm8994_aif3_hw_params()

2013-05-30T13:34:50+00:00

commit 4495e46fe18f198366961bb2b324a694ef8a9b44 upstream.

The missing break here means that we always return early and the
function is a no-op.

Signed-off-by: Dan Carpenter 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: max98088: Fix logging of hardware revision.

2013-05-13T14:02:20+00:00

commit 98682063549bedd6e2d2b6b7222f150c6fbce68c upstream.

The hardware revision of the codec is based at 0x40.  Subtract that
before convering to ASCII.  The same as it is done for 98095.

Signed-off-by: Dylan Reid 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running

2013-04-25T19:25:35+00:00

commit f1ca493b0b5e8f42d3b2dc8877860db2983f47b6 upstream.

The Charge Pump needs the DSP clock to work properly, without it the
bypass to HP/LINEOUT is not working properly. This requirement is not
mentioned in the datasheet but has been confirmed by Mark Brown from
Wolfson.

Signed-off-by: Alban Bedel 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: dma-sh7760: Fix compile error

2013-04-10T02:20:01+00:00

commit 417a1178f1bf3cdc606376b3ded3a22489fbb3eb upstream.

The dma-sh7760 currently fails with the following compile error:
	sound/soc/sh/dma-sh7760.c:346:2: error: unknown field 'pcm_ops' specified in initializer
	sound/soc/sh/dma-sh7760.c:346:2: warning: initialization from incompatible pointer type
	sound/soc/sh/dma-sh7760.c:347:2: error: unknown field 'pcm_new' specified in initializer
	sound/soc/sh/dma-sh7760.c:347:2: warning: initialization makes integer from pointer without a cast
	sound/soc/sh/dma-sh7760.c:348:2: error: unknown field 'pcm_free' specified in initializer
	sound/soc/sh/dma-sh7760.c:348:2: warning: initialization from incompatible pointer type
	sound/soc/sh/dma-sh7760.c: In function 'sh7760_soc_platform_probe':
	sound/soc/sh/dma-sh7760.c:353:2: warning: passing argument 2 of 'snd_soc_register_platform' from incompatible pointer type
	include/sound/soc.h:368:5: note: expected 'struct snd_soc_platform_driver *' but argument is of type 'struct snd_soc_platform *'

This is due the misnaming of the snd_soc_platform_driver type name and 'ops'
field. The issue was introduced in commit f0fba2a("ASoC: multi-component - ASoC
Multi-Component Support").

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: imx-ssi: Fix occasional AC97 reset failure

2013-04-10T02:19:54+00:00

commit b6e51600f4e983e757b1b6942becaa1ae7d82e67 upstream.

Signed-off-by: Sascha Hauer 
Signed-off-by: Markus Pargmann 
Signed-off-by: Mark Brown 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

ASoC: wm2000: Fix sense of speech clarity enable

2013-02-06T04:33:23+00:00

commit 267f8fa2e1eef0612b2007e1f1846bcbc35cc1fa upstream.

Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: wm5100: Remove DSP B and left justified formats

2013-02-06T04:33:22+00:00

commit 5f960294e2031d12f10c8488c3446fecbf59628d upstream.

These are not supported

Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: dapm: Use card_list during DAPM shutdown

2012-12-06T11:20:04+00:00

commit 445632ad6dda42f4d3f9df2569a852ca0d4ea608 upstream.

DAPM shutdown incorrectly uses "list" field of codec struct while
iterating over probed components (codec_dev_list). "list" field
refers to codecs registered in the system, "card_list" field is
used for probed components.

Signed-off-by: Misael Lopez Cruz 
Signed-off-by: Liam Girdwood 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: wm8978: pll incorrectly configured when codec is master

2012-12-06T11:20:03+00:00

commit 55c6f4cb6ef49afbb86222c6a3ff85329199c729 upstream.

When MCLK is supplied externally and BCLK and LRC are configured as outputs
(codec is master), the PLL values are only calculated correctly on the first
transmission.  On subsequent transmissions, at differenct sample rates, the
wrong PLL values are used.  Test for f_opclk instead of f_pllout to determine
if the PLL values are needed.

Signed-off-by: Eric Millbrandt 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings

ASoC: samsung dma - Don't indicate support for pause/resume.

2012-10-10T02:30:44+00:00

commit 57b2d68863f281737d8596cb3d76d89d9cc54fd8 upstream.

The pause and resume operations indicate that the stream can be
un-paused/resumed from the exact location they were paused/suspended.
This is not true for this driver, the pause and suspend triggers share
the same code path with stop, they flush all pending DMA transfers.
This drops all pending samples.  The pause_release/resume triggers are
the same as start, except that prepare won't be called beforehand,
nothing will be enqueued to the DMA engine and nothing will happen (no
audio).  Removing the pause flag will let apps know that it isn't
supported.  Removing the resume flag will cause user space to call
prepare and start instead of resume, so audio will continue playing when
the system wakes up.

Before removing the pause and resume flags, I tested this on an exynos
5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a
write error.  Suspend/resume testing led to the same result.  Removing
the two flags fixes suspend/resume (since snd_pcm_prepare is called
again). And leads to a proper reporting of pause not supported.

Signed-off-by: Dylan Reid 
Signed-off-by: Mark Brown 
Signed-off-by: Ben Hutchings