linux-toradex.git/sound/usb/Makefile, branch v4.10

[media] Revert "[media] sound/usb: Use Media Controller API to share media resources"

2016-03-31T18:02:33+00:00

Unfortunately, this patch caused several regressions at au0828 and
snd-usb-audio, like this one:
	https://bugzilla.kernel.org/show_bug.cgi?id=115561

It also showed several troubles at the MC core that handles pretty
poorly the memory protections and data lifetime management.

So, better to revert it and fix the core before reapplying this
change.

This reverts commit aebb2b89bff0 ("[media] sound/usb: Use Media
Controller API to share media resources")'

Signed-off-by: Mauro Carvalho Chehab

[media] sound/usb: Use Media Controller API to share media resources

2016-03-03T18:01:13+00:00

Change ALSA driver to use Media Controller API to share media resources
with DVB and V4L2 drivers on a AU0828 media device. Media Controller
specific initialization is done after sound card is registered. ALSA
creates Media interface and entity function graph nodes for Control,
Mixer, PCM Playback, and PCM Capture devices.

snd_usb_hw_params() will call Media Controller enable source handler
interface to request the media resource. If resource request is
granted, it will release it from snd_usb_hw_free(). If resource is
busy, -EBUSY is returned.

Media specific cleanup is done in usb_audio_disconnect().

Signed-off-by: Shuah Khan 
Acked-by: Takashi Iwai 
Signed-off-by: Mauro Carvalho Chehab

ALSA: line6: Split to each driver

2015-01-20T07:14:17+00:00

Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.

Tested-by: Chris Rorvick 
Signed-off-by: Takashi Iwai

ALSA: move line6 usb driver into sound/usb

2015-01-12T21:29:57+00:00

Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.

This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.

Signed-off-by: Takashi Iwai

ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20

2014-11-13T06:32:39+00:00

This code contains the Scarlett mixer interface code that was originally
written by Tobias Hoffman and Robin Gareus. Because the device doesn't
properly implement UAC2 this code adds a mixer quirk for the device.

Changes from the original code include removing the metering code along with
dead code and comments. Compiler warnings were fixed. The code to initialize
the sampling rate was causing a crash this was fixed as discussed on the
mailing list. Error, and info messages were convered to dev_err and dev_info
interfaces. The custom scarlett_mixer_elem_info struct was replaced with the
more generic usb_mixer_elem_info to be able to recycle more code from mixer.c.

This patch also makes additional modifications based on upstream comments.
Individual control creation functions are removed and a generic
function is no used. Macros for function calls are removed to improve
readability. Hardcoded control initialization is removed. Save to HW
functionality has been removed. Strings for enums are created dynamically for
the mixer. Strings used for controls are now SNDRV_CTL_ELEM_ID_NAME_MAXLEN
length.

Signed-off-by: Chris J Arges 
Signed-off-by: Takashi Iwai

ALSA: MIDI driver for Behringer BCD2000 USB device

2014-04-07T14:05:41+00:00

This patch adds initial support for the Behringer BCD2000 USB DJ controller.
At the moment, only the MIDI part of the device is working, i.e. knobs,
buttons and LEDs.

I also plan to add support for the audio part, but I assume that this will
require more effort than the rather simple MIDI interface. Progress can be
tracked at https://github.com/anyc/snd-usb-bcd2000.

Signed-off-by: Mario Kicherer 
Reviewed-by: Daniel Mack 
Reviewed-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai

Add M2Tech hiFace USB-SPDIF driver

2013-06-24T07:26:08+00:00

Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.

M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output
Interface, see http://www.m2tech.biz/hiface.html

The supported products are:

  * M2Tech Young
  * M2Tech hiFace
  * M2Tech North Star
  * M2Tech W4S Young
  * M2Tech Corrson
  * M2Tech AUDIA
  * M2Tech SL Audio
  * M2Tech Empirical
  * M2Tech Rockna
  * M2Tech Pathos
  * M2Tech Metronome
  * M2Tech CAD
  * M2Tech Audio Esclusive
  * M2Tech Rotel
  * M2Tech Eeaudio
  * The Chord Company CHORD
  * AVA Group A/S Vitus

Signed-off-by: Antonio Ospite 
Signed-off-by: Takashi Iwai

ALSA: snd-usb: move code from urb.c to endpoint.c

2011-09-14T15:07:03+00:00

No code altered at this point, simply preparing for upcoming
refactorizations.

Signed-off-by: Daniel Mack 
Acked-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai

ALSA: snd-usb: re-order code

2011-09-14T15:07:02+00:00

Move code from endpoint.c into a new file called stream.c and rename
functions so that their names actually reflect what they're doing.

This way, endpoint.c will be available to functions that hold all the
endpoint logic.

Signed-off-by: Daniel Mack 
Acked-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai

ALSA: snd-usb: re-order the Makefile

2011-09-14T15:07:01+00:00

Sort its entries in alphabetical order.

Signed-off-by: Daniel Mack 
Acked-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai