linux-toradex.git/sound/usb/usbaudio.h, branch v3.10.2 Linux kernel for Apalis and Colibri modules ALSA: usb-audio: UAC2: auto clock selection module param 2013-04-04T06:31:32+00:00 Eldad Zack eldad@fogrefinery.com 2013-04-03T21:18:56+00:00 ef02e29b0180ddbcc1ecf3c362e333c572f27c08 Add a module param to disable auto clock selection. This is provided for users that expect the audio stream to fail when the clock source is invalid (e.g., the word clock was unintentionally disconnected). Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Add a module param to disable auto clock selection.
This is provided for users that expect the audio stream to
fail when the clock source is invalid (e.g., the word clock
was unintentionally disconnected).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk 2013-01-04T08:53:17+00:00 Damien Zammit damien@zamaudio.com 2013-01-04T08:51:44+00:00 b7b435e81b7228af68b5d3bef277fce10100b369 This patch is based on 3.8-rc1. It fixes two things: 1) A kernel panic caused by incorrect allocation of a u8 variable "bootresponse". 2) A noisy dmesg (urb status -32) caused by broken pipe to an invalid midi endpoint. It is also a little cleaner because there is no need for a new QUIRK_MIDI type as suggested by kernel developers, since the device follows exactly the MIDIMAN protocol. Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
This patch is based on 3.8-rc1. It fixes two things:
1) A kernel panic caused by incorrect allocation of a u8 variable
   "bootresponse".
2) A noisy dmesg (urb status -32) caused by broken pipe to an
   invalid midi endpoint.

It is also a little cleaner because there is no need for a new
QUIRK_MIDI type as suggested by kernel developers, since the device
follows exactly the MIDIMAN protocol.

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card: 2012-12-19T10:27:22+00:00 Damien Zammit damien@zamaudio.com 2012-12-19T10:27:22+00:00 cb99864d40e46dea9c2aa3eaa97517b776f91024 This patch is the result of a lot of trial and error, since there are no specs available for the device. Full duplex support is provided, i.e. playback and recording in stereo. The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the device supports. Also, MIDI in and MIDI out both work. Users will notice that the S/PDIF light also flashes when playback or recording is active. I believe this means that S/PDIF input/output is simultaneously activated with the analogue i/o during use. But this particular functionality remains untested. Note that this particular version of the patch is so far untested on the physical hardware because I have not compiled a full kernel with the changes. However, extensive testing has been done by many users of the hardware who believe other versions of my patch have worked since circa 2009. [Modified to make a function static by tiwai] Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
This patch is the result of a lot of trial and error, since there are no specs
available for the device.

Full duplex support is provided, i.e. playback and recording in stereo.
The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the
device supports.  Also, MIDI in and MIDI out both work.

Users will notice that the S/PDIF light also flashes when playback or recording
is active.  I believe this means that S/PDIF input/output is simultaneously
activated with the analogue i/o during use.
But this particular functionality remains untested.

Note that this particular version of the patch is so far untested on the
physical hardware because I have not compiled a full kernel with the changes.
However, extensive testing has been done by many users of the hardware
who believe other versions of my patch have worked since circa 2009.

[Modified to make a function static by tiwai]

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: Deprecate async_unlink option 2012-11-21T10:37:40+00:00 Takashi Iwai tiwai@suse.de 2012-11-20T17:24:47+00:00 20d32022a8d8639a33d0e429f2d3c51b527ea362 The async unlink behavior has been working over years. The option was provided only as a workaround for 2.4.x kernel. Let's get rid of it. Signed-off-by: Takashi Iwai <tiwai@suse.de> 
The async unlink behavior has been working over years.  The option was
provided only as a workaround for 2.4.x kernel.  Let's get rid of it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: Use rwsem for disconnect protection 2012-10-30T10:07:00+00:00 Takashi Iwai tiwai@suse.de 2012-10-15T10:16:02+00:00 34f3c89fda4fba9fe689db22253ca8db2f5e6386 Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Replace mutex with rwsem for codec->shutdown protection so that
concurrent accesses are allowed.

Also add the protection to snd_usb_autosuspend() and
snd_usb_autoresume(), too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: snd-usb: implement new endpoint streaming model 2012-04-13T08:23:42+00:00 Daniel Mack zonque@gmail.com 2012-04-12T11:51:11+00:00 8fdff6a319e7dac757c558bd283dc4577e68cde7 This patch adds a new generic streaming logic for audio over USB. It defines a model (snd_usb_endpoint) that handles everything that is related to an USB endpoint and its streaming. There are functions to activate and deactivate an endpoint (which call usb_set_interface()), and to start and stop its URBs. It also has function pointers to be called when data was received or is about to be sent, and pointer to a sync slave (another snd_usb_endpoint) that is informed when data has been received. A snd_usb_endpoint knows about its state and implements a refcounting, so only the first user will actually start the URBs and only the last one to stop it will tear them down again. With this sort of abstraction, the actual streaming is decoupled from the pcm handling, which makes the "implicit feedback" mechanisms easy to implement. In order to split changes properly, this patch only adds the new implementation but leaves the old one around, so the the driver doesn't change its behaviour. The switch to actually use the new code is submitted separately. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
This patch adds a new generic streaming logic for audio over USB.

It defines a model (snd_usb_endpoint) that handles everything that
is related to an USB endpoint and its streaming. There are functions to
activate and deactivate an endpoint (which call usb_set_interface()),
and to start and stop its URBs. It also has function pointers to be
called when data was received or is about to be sent, and pointer to
a sync slave (another snd_usb_endpoint) that is informed when data has
been received.

A snd_usb_endpoint knows about its state and implements a refcounting,
so only the first user will actually start the URBs and only the last
one to stop it will tear them down again.

With this sort of abstraction, the actual streaming is decoupled from
the pcm handling, which makes the "implicit feedback" mechanisms easy to
implement.

In order to split changes properly, this patch only adds the new
implementation but leaves the old one around, so the the driver doesn't
change its behaviour. The switch to actually use the new code is
submitted separately.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: snd-usb: add snd_usb_audio-wide mutex 2012-04-13T08:21:55+00:00 Daniel Mack zonque@gmail.com 2012-04-12T11:51:10+00:00 596580d0ee1d17af70920a7bb06c963418014dd1 This is needed for new card-wide list operations. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
This is needed for new card-wide list operations.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: add Starr Labs USB MIDI support 2011-08-26T12:12:34+00:00 Kristian Amlie kristian@amlie.name 2011-08-26T11:19:49+00:00 1ef0e0a05345b7411bdabbfca27f58bd33dcc7c8 Add support for Starr Labs USB MIDI devices such as the Z7S, which are based on an FTDI serial UART chip. Based on a patch by Daniel Mack. Signed-off-by: Kristian Amlie <kristian@amlie.name> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Add support for Starr Labs USB MIDI devices such as the Z7S, which are
based on an FTDI serial UART chip.

Based on a patch by Daniel Mack.

Signed-off-by: Kristian Amlie <kristian@amlie.name>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: add new quirk type QUIRK_AUDIO_STANDARD_MIXER 2011-05-25T07:36:59+00:00 Daniel Mack zonque@gmail.com 2011-05-25T07:09:02+00:00 014950b013b7966b7e4a3ae6931c75e3c115296f This quirk type will let the driver assume that there is a standard mixer on a given interface, or that a specific mixer quirks will handle the device. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
This quirk type will let the driver assume that there is a standard
mixer on a given interface, or that a specific mixer quirks will handle
the device.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: usbaudio: implement USB autosuspend 2011-03-11T13:59:29+00:00 Oliver Neukum oneukum@suse.de 2011-03-11T13:51:12+00:00 88a8516a2128a6d078a106ead48092240e8a138f Devices are autosuspended if no pcm nor midi channel is open Mixer devices may be opened. This way they are active when in use to play or record sound, but can be suspended while users have a mixer application running. [Small clean-ups using static inline by tiwai] Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Devices are autosuspended if no pcm nor midi channel is open
Mixer devices may be opened. This way they are active when
in use to play or record sound, but can be suspended while
users have a mixer application running.

[Small clean-ups using static inline by tiwai]

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>