linux-toradex.git/sound, branch v3.0.38

ASoC: tlv320aic3x: Fix codec pll configure bug

2012-07-16T15:47:39+00:00

commit c9fe573a6584034670c1a55ee8162d623519cbbf upstream.

In sound/soc/codecs/tlv320aic3x.c

        data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
        snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
                      data | (pll_p << PLLP_SHIFT));

In the above code, pll-p value is OR'ed with previous value without
clearing it. Bug is not seen if pll-p value doesn't change across
Sampling frequency.

However on some platforms (like AM335x EVM-SK), pll-p may have different
values across different sampling frequencies. In such case, above code
configures the pll with a wrong value.
Because of this bug, when a audio stream is played with pll value
different from previous stream, audio is heard as differently(like its
stretched).

Signed-off-by: Hebbar, Gururaja 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Add Realtek ALC280 codec support

2012-07-16T15:47:35+00:00

commit befae82e2906cb7155020876a531b0b8c6c8d8c8 upstream.

This chip looks very similar to ALC269 and ALC27* variants. The bug reporter
has verified that sound was working after this patch had been applied.

BugLink: https://bugs.launchpad.net/bugs/1017017
Tested-by: Richard Crossley 
Signed-off-by: David Henningsson 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: fix rate_list memory leak

2012-06-09T15:33:01+00:00

commit 5cd5d7c44990658df6ab49f6253c39617c53b03d upstream.

The array of sample rates is reallocated every time when opening
the PCM device, but was freed only once when unplugging the device.

Reported-by: "Alexander E. Patrakov" 
Signed-off-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: HDA: Lessen CPU usage when waiting for chip to respond

2012-05-21T16:40:01+00:00

commit 32cf4023e689ad5b3a81a749d8cc99d7f184cb99 upstream.

When an IRQ for some reason gets lost, we wait up to a second using
udelay, which is CPU intensive. This patch improves the situation by
waiting about 30 ms in the CPU intensive mode, then stepping down to
using msleep(2) instead. In essence, we trade some granularity in
exchange for less CPU consumption when the waiting time is a bit longer.

As a result, PulseAudio should no longer be killed by the kernel
for taking up to much RT-prio CPU time. At least not for *this* reason.

Signed-off-by: David Henningsson 
Tested-by: Arun Raghavan 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: echoaudio: Remove incorrect part of assertion

2012-05-21T16:40:00+00:00

commit c914f55f7cdfafe9d7d5b248751902c7ab57691e upstream.

This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.

The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit dd7b254d.

ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)

Signed-off-by: Mark Hills 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ASoC: dapm: Ensure power gets managed for line widgets

2012-05-07T15:56:32+00:00

commit 7e1f7c8a6e517900cd84da1b8ae020f08f286c3b upstream.

Line widgets had not been included in either the power up or power down
sequences so if a widget had an event associated with it that event would
never be run. Fix this minimally by adding them to the sequences, we
should probably be doing away with the specific widget types as they all
have the same priority anyway.

Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/conexant - Don't set HP pin-control bit unconditionally

2012-04-27T16:51:05+00:00

commit ca3649de026ff95c6f2847e8d096cf2f411c02b3 upstream.

Some output pins on Conexant chips have no HP control bit, but the
auto-parser initializes these pins unconditionally with PIN_HP.

Check the pin-capability and avoid the HP bit if not supported.

Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ASoC: ak4642: fixup: mute needs +1 step

2012-04-13T15:14:08+00:00

commit 1f99e44cf059d2ed43c5a0724fa738b83800f725 upstream.

ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute.
But current settings didn't care +1 step for mute.
This patch adds it

Signed-off-by: Kuninori Morimoto 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: pxa-ssp: atomically set stream active masks

2012-04-02T16:27:11+00:00

commit 273b72c8ce6b28df6b49423d775c3e59072c73c5 upstream.

PXA's SSP engine fails to take its current channel phase into account
when enabling a stream while the engine is already running. This
results in randomly swapped left/right channels on either the record
or the playback side, depending on which one was enabled first.

The following patch fixes this by factoring out the bit field
modifications in question to a separate function that pauses the
engine temporarily, modifies the bits and kicks it off again
afterwards. Appearantly, a transition of SSCR0_SSE syncs both
directions properly.

The patch has been rolled out to quite a number of devices over the
last weeks and seems to fix the issue reliably.

Signed-off-by: Daniel Mack 
Reported-and-tested-by: Sven Neumann 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ASoC: neo1973: fix neo1973 wm8753 initialization

2012-03-19T15:57:42+00:00

commit b2ccf065f7b23147ed135a41b01d05a332ca6b7e upstream.

The neo1973 driver had wrong codec name which prevented the "sound card"
from appearing.

Signed-off-by: Denis 'GNUtoo' Carikli 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman