linux-toradex.git/sound, branch v3.10.14 Linux kernel for Apalis and Colibri modules ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist 2013-09-27T00:18:14+00:00 Takashi Iwai tiwai@suse.de 2013-09-09T08:20:48+00:00 ff70cfafb27ead6e06ba3d2e2f648fee7137d9e8 commit 83f72151352791836a1b9c1542614cc9bf71ac61 upstream. Toshiba Satellite C870 shows interrupt problems occasionally when certain mixer controls like "Mic Switch" is toggled. This seems worked around by not using MSI. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83f72151352791836a1b9c1542614cc9bf71ac61 upstream.

Toshiba Satellite C870 shows interrupt problems occasionally when
certain mixer controls like "Mic Switch" is toggled.  This seems
worked around by not using MSI.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA 2013-09-27T00:18:14+00:00 Anssi Hannula anssi.hannula@iki.fi 2013-09-01T11:36:47+00:00 686edbc09d22070e8ff3edaf7a6f53f80b4517b0 commit 18e391862cceaf43ddb8eb5cca05e1a83abdebaa upstream. hdmi_channel_allocation() tries to find a HDMI channel allocation that matches the number channels in the playback stream and contains only speakers that the HDMI sink has reported as available via EDID. If no such allocation is found, 0 (stereo audio) is used. Using CA 0 causes the audio causes the sink to discard everything except the first two channels (front left and front right). However, the sink may be capable of receiving more channels than it has speakers (and then perform downmix or discard the extra channels), in which case it is preferable to use a CA that contains extra channels than to use CA 0 which discards all the non-stereo channels. Additionally, it seems that HBR (HD) passthrough output does not work on Intel HDMI codecs when CA is set to 0 (possibly the codec zeroes channels not present in CA). This happens with all receivers that report a 5.1 speaker mask since a HBR stream is carried on 8 channels to the codec. Add a fallback in the CA selection so that the CA channel count at least matches the stream channel count, even if the stream contains channels not present in the sink speaker descriptor. Thanks to GrimGriefer at OpenELEC forums for discovering that changing the sink speaker mask allowed HBR output. Reported-by: GrimGriefer Reported-by: Ashecrow Reported-by: Frank Zafka <kafkaesque1978@gmail.com> Reported-by: Peter Frühberger <fritsch@xbmc.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 18e391862cceaf43ddb8eb5cca05e1a83abdebaa upstream.

hdmi_channel_allocation() tries to find a HDMI channel allocation that
matches the number channels in the playback stream and contains only
speakers that the HDMI sink has reported as available via EDID. If no
such allocation is found, 0 (stereo audio) is used.

Using CA 0 causes the audio causes the sink to discard everything except
the first two channels (front left and front right).

However, the sink may be capable of receiving more channels than it has
speakers (and then perform downmix or discard the extra channels), in
which case it is preferable to use a CA that contains extra channels
than to use CA 0 which discards all the non-stereo channels.

Additionally, it seems that HBR (HD) passthrough output does not work on
Intel HDMI codecs when CA is set to 0 (possibly the codec zeroes
channels not present in CA). This happens with all receivers that report
a 5.1 speaker mask since a HBR stream is carried on 8 channels to the
codec.

Add a fallback in the CA selection so that the CA channel count at least
matches the stream channel count, even if the stream contains channels
not present in the sink speaker descriptor.

Thanks to GrimGriefer at OpenELEC forums for discovering that changing
the sink speaker mask allowed HBR output.

Reported-by: GrimGriefer
Reported-by: Ashecrow
Reported-by: Frank Zafka <kafkaesque1978@gmail.com>
Reported-by: Peter Frühberger <fritsch@xbmc.org>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches 2013-09-27T00:18:14+00:00 Takashi Iwai tiwai@suse.de 2013-09-02T10:33:02+00:00 dc780f7fc64b6ca11854cd5ac724b85fa1853495 commit b054087dbacee30a9dddaef2c9a96312146be04e upstream. When the transcoder:port mapping on Haswell HDMI/DP audio is changed during the stream playback, the sound gets lost. Typically this problem is seen when the user switches the graphics mode from eDP+DP to DP-only configuration, where CRTC 1 is used for DP in the former while CRTC 0 is used for the latter. The graphics controller notifies the change via the normal ELD update procedure, so we get the intrinsic event. For enabling the sound again, the HDMI audio driver needs to reset the pin and set up the audio infoframe again. This patch achieves it by: - keep the current status of channels and info frame setup in per_pin struct, - check the reconnection in the intrinsic event handler, - reset the pin and the re-invoke hdmi_setup_audio_infoframe() accordingly. The hdmi_setup_audio_infoframe() function has been changed, too, so that it can be invoked without passing the substream instance. The patch is mostly based on the work by Mengdong Lin. Cc: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b054087dbacee30a9dddaef2c9a96312146be04e upstream.

When the transcoder:port mapping on Haswell HDMI/DP audio is changed
during the stream playback, the sound gets lost.  Typically this
problem is seen when the user switches the graphics mode from eDP+DP
to DP-only configuration, where CRTC 1 is used for DP in the former
while CRTC 0 is used for the latter.

The graphics controller notifies the change via the normal ELD update
procedure, so we get the intrinsic event.  For enabling the sound
again, the HDMI audio driver needs to reset the pin and set up the
audio infoframe again.

This patch achieves it by:
- keep the current status of channels and info frame setup in per_pin
  struct,
- check the reconnection in the intrinsic event handler,
- reset the pin and the re-invoke hdmi_setup_audio_infoframe()
  accordingly.

The hdmi_setup_audio_infoframe() function has been changed, too, so
that it can be invoked without passing the substream instance.

The patch is mostly based on the work by Mengdong Lin.

Cc: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASoC: mc13783: add spi errata fix 2013-09-27T00:18:13+00:00 Steffen Trumtrar s.trumtrar@pengutronix.de 2013-09-09T16:09:12+00:00 87d5b89a6a77f1e141d41c5447f6a4e83feb8d11 commit 9f6f0afbb9fdabf6dcac642dfec457f28981e3f8 upstream. The MC13783 Chip Errata, Rev. 4 says, that depending on SPI clock and main audio clock speed, the Audio Codec or Stereo DAC do sometimes not start when programmed to do so. This is due to an internal clock timing issue related to the loading of the SPI bits into the audio block. On an i.MX27 based system, this issue lead to switched audio channels under certain circumstances: RTC + Touch + Audio are used and loaded at startup. The mentioned workaround of writing registers 40 and 41 two times is implemented here. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9f6f0afbb9fdabf6dcac642dfec457f28981e3f8 upstream.

The MC13783 Chip Errata, Rev. 4 says, that depending on SPI clock
and main audio clock speed, the Audio Codec or Stereo DAC do sometimes
not start when programmed to do so. This is due to an internal clock
timing issue related to the loading of the SPI bits into the audio block.

On an i.MX27 based system, this issue lead to switched audio channels under
certain circumstances: RTC + Touch + Audio are used and loaded at startup.

The mentioned workaround of writing registers 40 and 41 two times is implemented
here.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASoC: wm8960: Fix PLL register writes 2013-09-27T00:18:13+00:00 Mike Dyer mike.dyer@md-soft.co.uk 2013-08-16T17:36:28+00:00 a1b8ce5ac7db6a7c29a4ca658d5aff5384bd073e commit 85fa532b6ef920b32598df86b194571a7059a77c upstream. Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part should be split across each register in 8bit chunks. Signed-off-by: Mike Dyer <mike.dyer@md-soft.co.uk> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 85fa532b6ef920b32598df86b194571a7059a77c upstream.

Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part
should be split across each register in 8bit chunks.

Signed-off-by: Mike Dyer <mike.dyer@md-soft.co.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: opti9xx: Fix conflicting driver object name 2013-09-08T05:09:57+00:00 Takashi Iwai tiwai@suse.de 2013-08-27T10:03:01+00:00 c990ab45cb4fda0767b196f4303372bdad4f9f7a commit fb615499f0ad28ed74201c1cdfddf9e64e205424 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb615499f0ad28ed74201c1cdfddf9e64e205424 upstream.

The recent commit to delay the release of kobject triggered NULL
dereferences of opti9xx drivers.  The cause is that all
snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers
register the PnP card driver with the very same name, and also
snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with
the same name, too.  When these drivers are built in, quick
"register-release-and-re-register" actions occur, and this results in
Oops because of the same name is assigned to the kobject.

The fix is simply to assign individual names.  As a bonus, by using
KBUILD_MODNAME, the patch reduces more lines than it adds.

The fix is based on the suggestion by Russell King.

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - Add inverted digital mic fixup for Acer Aspire One 2013-09-08T05:09:57+00:00 Takashi Iwai tiwai@suse.de 2013-08-19T18:05:50+00:00 35133cc34699a77d66a26f6a115b275a38868127 commit d3d3835ce919438c00c5d1270d6f9d6ffea59d03 upstream. Yet another entry, just use the existing fixup for this machine, too. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d3d3835ce919438c00c5d1270d6f9d6ffea59d03 upstream.

Yet another entry, just use the existing fixup for this machine, too.

Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n 2013-09-08T05:09:57+00:00 Takashi Iwai tiwai@suse.de 2013-08-22T07:55:36+00:00 da958137df4bcd9b2b5ea83db75f66a46c3ef46f commit 2ca320e294a738c9134a71b5029de05edbfc7aad upstream. Without the dynamic minor assignment, HDMI codec may have less PCM instances than the number of pins, which eventually leads to Oops. Reported-by: Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2ca320e294a738c9134a71b5029de05edbfc7aad upstream.

Without the dynamic minor assignment, HDMI codec may have less PCM
instances than the number of pins, which eventually leads to Oops.

Reported-by: Stratos Karafotis <stratosk@semaphore.gr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - Add a fixup for Gateway LT27 2013-08-20T15:43:04+00:00 Takashi Iwai tiwai@suse.de 2013-08-16T06:17:05+00:00 fa392433df90eec8059dae7323ed2b398c92ecb2 commit 1801928e0f99d94c55e33c584c5eb2ff5e246ee6 upstream. Gateway LT27 needs a fixup for the inverted digital mic. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1801928e0f99d94c55e33c584c5eb2ff5e246ee6 upstream.

Gateway LT27 needs a fixup for the inverted digital mic.

Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - Add pinfix for LG LW25 laptop 2013-08-20T15:43:04+00:00 Takashi Iwai tiwai@suse.de 2013-08-09T10:34:42+00:00 db3175e1e8bb0701e2a96a5f5e6bee6038da5fd2 commit db8a38e5063a4daf61252e65d47ab3495c705f4c upstream. Correct the pins for a line-in and a headphone on LG LW25 laptop with ALC880 codec. Other pins seem fine. Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit db8a38e5063a4daf61252e65d47ab3495c705f4c upstream.

Correct the pins for a line-in and a headphone on LG LW25 laptop with
ALC880 codec.  Other pins seem fine.

Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>